Become a Site Supporter and Never see Ads again!

Author Topic: Finally ... your SHOTGUN microphone will sound like a Schoeps!  (Read 6714 times)

0 Members and 1 Guest are viewing this topic.

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: Finally ... your SHOTGUN microphone will sound like a Schoeps!
« Reply #15 on: October 05, 2005, 03:16:36 PM »
Frequency 40 - 20K
Sensitivity 17 mv/pa
Current consumption: 4.4 mah
load impedance: 600 ohm or greater
Noise Equiv 13 db
Max SPL 132 db @ .05% THD
pattern: supercardioid/lobe

600 ohm load or greater.  Average condensor is 200 ohms or lower 

Low sensitivity for a shotgun: 17mv/pa.  The TOTL shotguns average around 50 mv/pa.

Power guzzler: 4.4 mah.  Average mic is 2 mah or lower

Noise level is nice and low at 13 db.


This mic compare to the AKG C568EB shotgun  the 568 is also a 600 ohm stick.  Its sensitivity is 11 mv/pa, Frequency 20-20K, 600 ohm,   Max SPL 128 @ .05% THD,     Noise equiv. 18 db.   
Pattern: hypercardioid/pressure gradient  Below 500 hz - a hyper, above 500 hz - increasing directionality


This comparison is based on specs alone.  How it sounds will probably be found in some of the Vid-head forums on the 'net.  They'll be the first to try it out.  Important to note: this mic is not a capsule, but a stand alone stick.

at least they picked a nice gun to copy-cat ;D
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline spyder9

  • Trade Count: (82)
  • Needs to get out more...
  • *****
  • Posts: 13199
  • Gender: Male
  • "Are you Zman?"
    • My Archived shows
Re: Finally ... your SHOTGUN microphone will sound like a Schoeps!
« Reply #16 on: October 05, 2005, 04:07:38 PM »
Frequency 40 - 20K
Sensitivity 17 mv/pa
Current consumption: 4.4 mah
load impedance: 600 ohm or greater
Noise Equiv 13 db
Max SPL 132 db @ .05% THD
pattern: supercardioid/lobe

600 ohm load or greater.  Average condensor is 200 ohms or lower 

Low sensitivity for a shotgun: 17mv/pa.  The TOTL shotguns average around 50 mv/pa.

Power guzzler: 4.4 mah.  Average mic is 2 mah or lower

Noise level is nice and low at 13 db.


This mic compare to the AKG C568EB shotgun  the 568 is also a 600 ohm stick.  Its sensitivity is 11 mv/pa, Frequency 20-20K, 600 ohm,   Max SPL 128 @ .05% THD,     Noise equiv. 18 db.   
Pattern: hypercardioid/pressure gradient  Below 500 hz - a hyper, above 500 hz - increasing directionality


This comparison is based on specs alone.  How it sounds will probably be found in some of the Vid-head forums on the 'net.  They'll be the first to try it out.  Important to note: this mic is not a capsule, but a stand alone stick.

at least they picked a nice gun to copy-cat ;D

Absawootley!   ;)   8)

Offline muj

  • Trade Count: (0)
  • Taperssection All-Star
  • ****
  • Posts: 1544
  • Gender: Male
  • Certifiable Nevaton Fluffer
Re: Finally ... your SHOTGUN microphone will sound like a Schoeps!
« Reply #17 on: October 05, 2005, 04:18:49 PM »
nice for those big ass rock arena shows......nice!!!

 

RSS | Mobile
Page created in 0.053 seconds with 28 queries.
© 2002-2024 Taperssection.com
Powered by SMF