My AD2K is no longer powering up and I'm hoping for some insight into what's wrong and/or repair advice. I was using it 4-5 months ago at a show and recorded the first set fine and left everything on during the set break...when I can back a few minutes before the 2nd set, it was powered down, so I tried everything an no luck - the pwer light would come on for a second and then turn off, so I figured the battery was dead. Since I had charged the battery fully the night before and it usually would run the AD2K forever, I figured the battery was old and failing.
Long and short of it, I didn't use the AD2K again until a few nights ago - I had recieved a fairly new EcoCharge with a DA-P1 I bought and th ecocharge has both a 7.5v out and a 12v out, so I set up at a show and plugged the AD2K in and nothing...just a dull flicker of the power light and then nothing. Any thoughts on what'g going on? Does Benchmark still work on/repair these units? Please advise - I love that A/D and I'm now without 24 bit until I hopefully can fix it.