Taperssection.com
Gear / Technical Help => Microphones & Setup => Topic started by: wboswell on April 29, 2003, 12:54:40 PM
-
I friend is playing at a local club next week and wants me to record the show. Obviously, I will be able to run any type of setup I want, but I was wondering what others think would be the ideal setup. I have several decks to run and have software to do a matrix. For some reason, I want to put something (cards - don't have access to omni at the moment) on stage, hypers in the aud, and then run a board copy.
He is a local singer songwriter. Edwin McCain just produced his album and this is the CD release party. He'll be with a full band doing music Edwin/Hootie genre.
Should I even mess with the cards on stage? I prolly will opt to just run cards in the aud and mix the sbd in with soundforge. That just sounds boring to me :)
Opinions?
-
depending on the size of the club, you could run your hypers at the band from the board and the cards to the aud from onstage ala phish....this would give a nice reproduction of the crowd w/ the band being picked up on the board and hypersm set up from the board...i dunno, it would be fun to try tho... ;)
my 00.02
bean
-
yeah, I was thinking the same. with the cards on stage you would be picking up some of the monitors as well, with more drums in the mix...........give it a shot
-
run the cards NOS onstage!!!
this will give a real ncie soundstage if the band isn't too bunched together. if they are...just reduce the included angle a bit.
good luck,
dave
-
So, you are saying point the cards toward the aud and run hypers from the soundboard? Are you saying run a sbd copy as well and matrix the three? Looking for more clarification.
I can't imagine the place being all that full for the show.
-
if its a small place and its not gonna be that full, i would run the cards at the aud and matrix that....just my 00.02
bean
-
if its a small place and its not gonna be that full, i would run the cards at the aud and matrix that....just my 00.02
bean
onstage cards pointed at aud + dsbd if I get you right...
If I do that, I can run them through the snake back to the board and be out of the way.
Thanks for the ideas
So far, I'll prolly still go for the mk4>kcy>cmc6>v3 25'/dfc and run a sbd>p1 copy and do a mix in the post.
-
soundz great bro....hope all goes well.....that is exactly what i meant....i would love to hear the results.... ;)
bean
-
If you have the capability, Blumlein or cards on-stage, one onmi in the aud and the board patch.
-JB
-
i dont think that bean knows what hes doin hahahahahahlol :o
-
phuck you, you real life mini-me....oooooohhhhh that was a good one... ;)
bean