Topic: Clamp recommendations?

[dnsacks]

greenone -- re shure vert bar and rowi clamp -- what worked great for me was running the shure vert bar upside-down.  I.E. turning it over so it hangs down from the clamp rather than "rise up" from the clamp.  This seemed to reduce the sheer force on the clamp. 

[F.O.Bean]

greenone -- re shure vert bar and rowi clamp -- what worked great for me was running the shure vert bar upside-down.  I.E. turning it over so it hangs down from the clamp rather than "rise up" from the clamp.  This seemed to reduce the sheer force on the clamp. 

agreed, i do that when space is tight sometimes too, the rowi can hold that stuff pretty well, and i like the wooden screw that comes w/ it too so you could screw it into the wood if need be and ui tested it and it held 480's + at 8415 mounts

[greenone]

Interesting. It would seem to me that weight is weight and torque is torque, but I might have to try that. Thanks!

[John R]

Interesting. It would seem to me that weight is weight and torque is torque, but I might have to try that. Thanks!

gravity is gravity


i had to...

[fozzy]

fwiw. I run my vert bar/8410's/481's on my windtech clamp upside down all the time.  It seems much more stable than right side up.