Become a Site Supporter and Never see Ads again!

Author Topic: 2000mah NiMH batteries (modsbm1 and m1)  (Read 7988 times)

0 Members and 1 Guest are viewing this topic.

Offline Tim

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 32913
  • Gender: Male
2000mah NiMH batteries (modsbm1 and m1)
« on: May 22, 2005, 02:37:03 PM »
so I just went and bought some rechargeable NiMH batteries, from what I can gather the 2000maH batts should get me a full 2 set/3hr show out of the sbm1 without much problem, I'm assuming they'll do fine in the m1 as well

does anyone have any experience with 2000mah batts in these devices that could shed some light on runtimes? This is my first foray into NiMH batteries, so I'm still learning as I go... thanks for the help guys....
I’ve had a few weird experiences and a few close brushes with total weirdness of one sort or another, but nothing that’s really freaked me out or made me feel too awful about it. - Jerry Garcia

Offline macdaddy

  • Trade Count: (10)
  • Needs to get out more...
  • *****
  • Posts: 7657
Re: 2000mah NiMH batteries (modsbm1 and m1)
« Reply #1 on: May 22, 2005, 02:40:59 PM »
mine are 2300, and yes, one set of 4 will run the modsbm1 (line in)  for a two set dead/allman/phish show...

2 of them run the d100 for the duration, too... i have never run a m1

i use the powerex batts from maha energy...

-macdaddy ++

akg c422 > s42 > lunatec v2 > ad2k+ > roland r-44

Offline Brian Skalinder

  • Complaint Dept.
  • Trade Count: (28)
  • Needs to get out more...
  • *****
  • Posts: 18868
  • Gender: Male
Re: 2000mah NiMH batteries (modsbm1 and m1)
« Reply #2 on: May 22, 2005, 02:43:59 PM »
Should be fine, Tim.  However, IME sometimes it takes a few full charge / discharge cycles before you get full capacity out of NiMH rechargeables.  So...I'd carry a back-up set for both M1 and modSBM-1 at least initially.  No, I take it back - carry an extra set every time you tape - never know when you think you have a good charge but it's actually not full.
Milab VM-44 Links > Fostex FR-2LE or
Naiant IPA (tinybox format) >
Roland R-05

Offline Tim

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 32913
  • Gender: Male
Re: 2000mah NiMH batteries (modsbm1 and m1)
« Reply #3 on: May 22, 2005, 02:48:08 PM »
thanks guys, much appreciated!

I bought 12, I need 6 to run everything so I should be fine

+T's
I’ve had a few weird experiences and a few close brushes with total weirdness of one sort or another, but nothing that’s really freaked me out or made me feel too awful about it. - Jerry Garcia

Offline Todd R

  • Over/Under on next gear purchase: 2 months
  • Trade Count: (29)
  • Needs to get out more...
  • *****
  • Posts: 4901
  • Gender: Male
Re: 2000mah NiMH batteries (modsbm1 and m1)
« Reply #4 on: May 22, 2005, 07:09:42 PM »
Did you find them locally, Tim?  I need to pick some more up myself.
Mics: Microtech Gefell m20/m21 (nbob/pfa actives), Line Audio CM3, Church CA-11 cards
Preamp:  none <sniff>
Recorders:  Sound Devices MixPre-6, Sony PCM-M10, Zoom H4nPro

Offline Tim

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 32913
  • Gender: Male
Re: 2000mah NiMH batteries (modsbm1 and m1)
« Reply #5 on: May 22, 2005, 07:29:37 PM »
I got them at Radio Shack per your advice the other night.. I also got a smart charger from radio shack but was planning on asking you about a quality charger I could order online

I did a search about NiMH batteries on this site and saw someone said you could get the batts at Target now

I’ve had a few weird experiences and a few close brushes with total weirdness of one sort or another, but nothing that’s really freaked me out or made me feel too awful about it. - Jerry Garcia

Offline Genghis Cougar Mellen Khan

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 2238
  • Gender: Male
  • Tin Can > Wax String > Dictaphone
Re: 2000mah NiMH batteries (modsbm1 and m1)
« Reply #6 on: May 22, 2005, 08:54:04 PM »
Should be fine, Tim.  However, IME sometimes it takes a few full charge / discharge cycles before you get full capacity out of NiMH rechargeables.  So...I'd carry a back-up set for both M1 and modSBM-1 at least initially.  No, I take it back - carry an extra set every time you tape - never know when you think you have a good charge but it's actually not full.

Exactly, I'd cycle the batteries at least a couple times before use.  If you have an old mag light or something, charge them, put them in them then recharge when they die.  It made a very significant gain in capacity after a few cycles.

I've never ran a SBM, but in my M1 I'd say I could get at least 3hrs run time with a fresh set of Powerex 2000 mAh batteries.  I noticed sometimes the battery level bar on the M1 dropped to 3 or even 2 bars in 1/2 hour of recording but ran for the rest of the show (on avg. 2 hrs) and always had plenty of juice to rewind.  I thought it might be because NiMH batteries put out 1.2v and the M1 might be calibrated for alkaline bats that put out 1.5v, but the unit comes with NiCad batteries that only supply 1.2v so who knows.  Basically if your battery level bar drops quickly, you may not be screwed.   :P
Maybe a couple of small scratches, but thats because these mics are chick magnets.
Girls always up on Andy tryin to grab these mics, the scratches are from their wedding rings.

CMC641 / DPA4022 / DPA4062>mod MPS6030
V3 / PMD671 / field ready DV-RA1000 / Oade W-mod PMD661 / PCM-M10

Offline Tim

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 32913
  • Gender: Male
Re: 2000mah NiMH batteries (modsbm1 and m1)
« Reply #7 on: May 22, 2005, 11:23:47 PM »
+T for the info
I’ve had a few weird experiences and a few close brushes with total weirdness of one sort or another, but nothing that’s really freaked me out or made me feel too awful about it. - Jerry Garcia

Offline Genghis Cougar Mellen Khan

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 2238
  • Gender: Male
  • Tin Can > Wax String > Dictaphone
Re: 2000mah NiMH batteries (modsbm1 and m1)
« Reply #8 on: May 22, 2005, 11:45:10 PM »
I got them at Radio Shack per your advice the other night.. I also got a smart charger from radio shack but was planning on asking you about a quality charger I could order online


http://shop.mahaenergy.com/store/viewItem.asp?idProduct=400

Best batteries on the market IMO...

http://shop.mahaenergy.com/store/viewItem.asp?idProduct=405

Unique FLEX negative pulse charging algorithm allow the battery to accept a more complete charge
 
Regardless of the of battery’s capacity, if they cannot be fully charged users would not be able to fully realize the potential of the batteries. The PowerEx MH-C401FS delivers the most complete charge for chargers in its class. The new FLEX negative pulse algorithm also significantly enhances battery life.
FLEX Pulse also makes traditional "battery conditioning & cycling" unnecessary as the pulse eliminates the memory effect just by charging the batteries.


I luvvvv my Powerex bats and maha charger...  :)

Tim, do you need a personal shopper? I don't charge as long as it's taping gear or related.  ;)
« Last Edit: May 22, 2005, 11:47:24 PM by Genghis Cougar Mellen Khan »
Maybe a couple of small scratches, but thats because these mics are chick magnets.
Girls always up on Andy tryin to grab these mics, the scratches are from their wedding rings.

CMC641 / DPA4022 / DPA4062>mod MPS6030
V3 / PMD671 / field ready DV-RA1000 / Oade W-mod PMD661 / PCM-M10

Offline leegeddy

  • Trade Count: (1)
  • Taperssection All-Star
  • ****
  • Posts: 1953
  • Gender: Male
Re: 2000mah NiMH batteries (modsbm1 and m1)
« Reply #9 on: May 23, 2005, 12:56:22 AM »
http://www.nimhbattery.com/maha_2500_rechargeable_batteries.php



$12.97 per pack (4/pack)

i run the Lenmar 2450mah and they are awesome!

marc
"I'm a taper, he's a taper. Wouldn't you like to be a taper too?"
"Mics? What mics? This is my hat."

Offline zhianosatch

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8992
  • Gender: Male
  • god-damned hippies!
Re: 2000mah NiMH batteries (modsbm1 and m1)
« Reply #10 on: May 23, 2005, 02:15:57 AM »
http://www.nimhbattery.com/maha_2500_rechargeable_batteries.php



$12.97 per pack (4/pack)

i run the Lenmar 2450mah and they are awesome!

marc


dude, i had one of the lenmar 2450s die on me! it won't take a charge from either of my two smart chargers and it's got no juice, either... damn!

Offline Genghis Cougar Mellen Khan

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 2238
  • Gender: Male
  • Tin Can > Wax String > Dictaphone
Re: 2000mah NiMH batteries (modsbm1 and m1)
« Reply #11 on: May 23, 2005, 08:20:51 AM »
http://www.nimhbattery.com/maha_2500_rechargeable_batteries.php



$12.97 per pack (4/pack)

i run the Lenmar 2450mah and they are awesome!

marc


dude, i had one of the lenmar 2450s die on me! it won't take a charge from either of my two smart chargers and it's got no juice, either... damn!

Please don't post a picture of  Powerew battery when talking about Lemnars, I find it highly offensive.  ;)
Maybe a couple of small scratches, but thats because these mics are chick magnets.
Girls always up on Andy tryin to grab these mics, the scratches are from their wedding rings.

CMC641 / DPA4022 / DPA4062>mod MPS6030
V3 / PMD671 / field ready DV-RA1000 / Oade W-mod PMD661 / PCM-M10

Offline blastroknow

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 362
  • you can fight about love all you want
Re: 2000mah NiMH batteries (modsbm1 and m1)
« Reply #12 on: May 23, 2005, 12:03:11 PM »
I just bought the 2500 mah Energizers for my new/used sbm-1 unit and when I first charged them up and tested with the sbm-1 I got 3 hours and still 3 bars – then I recharged and went to tape a show Saturday night and the sbm-1 died in 50 min!!  My lenmar 2300s in my d8 have been great – I guess I need to cycle the new energizers a few times. 

BTW - $10 for 4 of those 2500s Energizers @ Target regular price.
Core-sound HEB 4060s > iRiver h120
or
AT853 > AT8531 > ToddR mod SBM-1 > iRiver h120

Offline Genghis Cougar Mellen Khan

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 2238
  • Gender: Male
  • Tin Can > Wax String > Dictaphone
Re: 2000mah NiMH batteries (modsbm1 and m1)
« Reply #13 on: May 23, 2005, 01:34:46 PM »
I just bought the 2500 mah Energizers for my new/used sbm-1 unit and when I first charged them up and tested with the sbm-1 I got 3 hours and still 3 bars – then I recharged and went to tape a show Saturday night and the sbm-1 died in 50 min!!  My lenmar 2300s in my d8 have been great – I guess I need to cycle the new energizers a few times. 

BTW - $10 for 4 of those 2500s Energizers @ Target regular price.


That's why I suggest the Maha charger.  Your batteries aren't worth a damn if the charger sucks.
Maybe a couple of small scratches, but thats because these mics are chick magnets.
Girls always up on Andy tryin to grab these mics, the scratches are from their wedding rings.

CMC641 / DPA4022 / DPA4062>mod MPS6030
V3 / PMD671 / field ready DV-RA1000 / Oade W-mod PMD661 / PCM-M10

Offline macdaddy

  • Trade Count: (10)
  • Needs to get out more...
  • *****
  • Posts: 7657
Re: 2000mah NiMH batteries (modsbm1 and m1)
« Reply #14 on: May 23, 2005, 01:39:23 PM »
i have said it before, i think even in this thread, but...

those powerex batteries i bought, and the charger (car and plug) that is linked above - which is the one i have, too - are terrific. i bought it all online from maha energy, and i will do business with them again, when and if i need any more battery power stuff...

-macdaddy ++

akg c422 > s42 > lunatec v2 > ad2k+ > roland r-44

 

RSS | Mobile
Page created in 0.088 seconds with 43 queries.
© 2002-2024 Taperssection.com
Powered by SMF