Become a Site Supporter and Never see Ads again!

Author Topic: Equipment, External Battery, Voltage and DC Plug Size Info  (Read 154936 times)

0 Members and 1 Guest are viewing this topic.

Offline tgakidis

  • Trade Count: (552)
  • Needs to get out more...
  • *****
  • Posts: 5749
  • Gender: Male
    • My Recordings on the Archive:
Re: Equipment, External Battery, Voltage and DC Plug Size Info
« Reply #45 on: October 28, 2013, 10:28:27 AM »
Hi everybody.

I have a tascam Dr100 Mkii and i wanted to know if the Anker Pro 20 000 maH battery works with this recorder ?

Thanks

Have a great day

You can run the Tascam DR100mkii off the 5v USB port with a USB > 4.00mm OD × 1.70mm ID (Center pin +, Ring - ) cable.  I can build you a custom cable if you need one.  See here about half way down the first post "5v USB External Battery Cables" http://taperssection.com/index.php?topic=131680.0
GAKables: Custom XLR, Digi & Batt Cables http://taperssection.com/index.php?topic=133186.0

Mics: Schoeps CMC6 x 4, Schoeps CMC1K x 2 / Schoeps KC 5G x 2 / Schoeps MK4,MK41,MK21,MK22 x 2 / Austrian Audio OC818 Dual Set+ / Telefunken TF-11 x 2 / Telefunken ELA M 260 x 4 / Telefunken M960FS x 2 / TK60,TK61,TK62 x 2 / Telefunken M60,TK60 x 2 / AKG c426b / AKG c34 / nBob AKG Actives>PFA x 4 / CK61,CK63,CK8 x 2 / AT853 4.7k Mod (Card,Sub)
Pres: Sonosax SX-AD8+ / Sonosax SX-M2D2 / Sonosax SX-M2 / Lunatec V3
Recs: Sonosax SX-R4+ / Sound Devices MixPre-6ii / Marantz PMD-661 / Roland R-07 / Zoom F3

My Recordings: https://archive.org/search.php?query=taper%3A%28Gakidis%29&sort=-da

Offline LuisT

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 4
Re: Equipment, External Battery, Voltage and DC Plug Size Info
« Reply #46 on: October 28, 2013, 03:24:50 PM »
Ok.

So the accessories with the Anker Pro seems to be fine, right ?

http://www.ianker.com//images/pics/goods_img/79AN20L-SA/35171.jpg

There's a 4.00x1.70 adapter.

And there's also a usb / 5V adapter :

http://www.ianker.com//images/pics/goods_img/79AN20L-SA/34199.jpg

Do you think it's fine ?

I prefer to ask before to buy cause you seem to know this battery stuff.

Thanks :)

Offline LuisT

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 4
Re: Equipment, External Battery, Voltage and DC Plug Size Info
« Reply #47 on: October 28, 2013, 03:26:14 PM »
And also, does someone knows how long is the Anker Pro 20 000 mAh with a DR100 with phantom power on on the 2 mic inputs ?

:)

Offline tgakidis

  • Trade Count: (552)
  • Needs to get out more...
  • *****
  • Posts: 5749
  • Gender: Male
    • My Recordings on the Archive:
Re: Equipment, External Battery, Voltage and DC Plug Size Info
« Reply #48 on: October 28, 2013, 05:56:27 PM »
Ok.

So the accessories with the Anker Pro seems to be fine, right ?

There's a 4.00x1.70 adapter.

And there's also a usb / 5V adaptet

Do you think it's fine ?


Looks like you are good to go.  I think this will
Power then unit for a VERY long time.
GAKables: Custom XLR, Digi & Batt Cables http://taperssection.com/index.php?topic=133186.0

Mics: Schoeps CMC6 x 4, Schoeps CMC1K x 2 / Schoeps KC 5G x 2 / Schoeps MK4,MK41,MK21,MK22 x 2 / Austrian Audio OC818 Dual Set+ / Telefunken TF-11 x 2 / Telefunken ELA M 260 x 4 / Telefunken M960FS x 2 / TK60,TK61,TK62 x 2 / Telefunken M60,TK60 x 2 / AKG c426b / AKG c34 / nBob AKG Actives>PFA x 4 / CK61,CK63,CK8 x 2 / AT853 4.7k Mod (Card,Sub)
Pres: Sonosax SX-AD8+ / Sonosax SX-M2D2 / Sonosax SX-M2 / Lunatec V3
Recs: Sonosax SX-R4+ / Sound Devices MixPre-6ii / Marantz PMD-661 / Roland R-07 / Zoom F3

My Recordings: https://archive.org/search.php?query=taper%3A%28Gakidis%29&sort=-da

Offline LuisT

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 4
Re: Equipment, External Battery, Voltage and DC Plug Size Info
« Reply #49 on: October 28, 2013, 06:28:15 PM »
Alright !
Thanks from France ! :)


Offline darktrain

  • Trade Count: (715)
  • Needs to get out more...
  • *****
  • Posts: 2875
  • Gender: Male
  • Whats next?
Re: Equipment, External Battery, Voltage and DC Plug Size Info
« Reply #50 on: December 24, 2014, 10:06:01 PM »
New addition for the list - Fostex DC-R302  5.5mm x 2.1mm  9-24v center +

Offline tgakidis

  • Trade Count: (552)
  • Needs to get out more...
  • *****
  • Posts: 5749
  • Gender: Male
    • My Recordings on the Archive:
Re: Equipment, External Battery, Voltage and DC Plug Size Info
« Reply #51 on: December 27, 2014, 05:11:38 AM »
New addition for the list - Fostex DC-R302  5.5mm x 2.1mm  9-24v center +

Thanks Robb!
GAKables: Custom XLR, Digi & Batt Cables http://taperssection.com/index.php?topic=133186.0

Mics: Schoeps CMC6 x 4, Schoeps CMC1K x 2 / Schoeps KC 5G x 2 / Schoeps MK4,MK41,MK21,MK22 x 2 / Austrian Audio OC818 Dual Set+ / Telefunken TF-11 x 2 / Telefunken ELA M 260 x 4 / Telefunken M960FS x 2 / TK60,TK61,TK62 x 2 / Telefunken M60,TK60 x 2 / AKG c426b / AKG c34 / nBob AKG Actives>PFA x 4 / CK61,CK63,CK8 x 2 / AT853 4.7k Mod (Card,Sub)
Pres: Sonosax SX-AD8+ / Sonosax SX-M2D2 / Sonosax SX-M2 / Lunatec V3
Recs: Sonosax SX-R4+ / Sound Devices MixPre-6ii / Marantz PMD-661 / Roland R-07 / Zoom F3

My Recordings: https://archive.org/search.php?query=taper%3A%28Gakidis%29&sort=-da

markrsmith

  • Guest
  • Trade Count: (0)
Re: Equipment, External Battery, Voltage and DC Plug Size Info
« Reply #52 on: June 14, 2015, 08:32:05 PM »
I just picked up a Sony tc-d5 cassette recorder. 
Anyone know the size of its tip connector for going into an eco-charge bp-50 (6 volt), also its polarity?
Just getting to know this machine.
mark.

On Ebay, the AC power supply (Sony AC-D4L power supply  6v-650mA) shows = center negative.
« Last Edit: June 14, 2015, 11:26:26 PM by markrsmith »

Offline Hypnocracy

  • Site Supporter
  • Trade Count: (46)
  • Needs to get out more...
  • *
  • Posts: 2011
  • Hypnocratic Missionary
    • Hypno on teh LMA
Re: Equipment, External Battery, Voltage and DC Plug Size Info
« Reply #53 on: February 21, 2016, 08:08:00 PM »
Saw were someone asked about DR-680MKII Power

A bit of bad news as far as external power goes--the MKii uses a smaller size external adapter.  The one for the MKi doesn't fit.

OD 4.75mm x ID 1.7mm (adapt-a-plug size C) seems to fit the best. 

OD 4.0mm x ID 1.7mm (adapt-a-plug size B) also worked but was not as snug as the C.
_____________
hypno on teh Archive

This must be heaven -- 'cause here's where the rainbow ends
If this ain't the real thing, then it's close enough to pretend

Offline tgakidis

  • Trade Count: (552)
  • Needs to get out more...
  • *****
  • Posts: 5749
  • Gender: Male
    • My Recordings on the Archive:
Re: Equipment, External Battery, Voltage and DC Plug Size Info
« Reply #54 on: February 21, 2016, 08:14:40 PM »
Saw were someone asked about DR-680MKII Power

A bit of bad news as far as external power goes--the MKii uses a smaller size external adapter.  The one for the MKi doesn't fit.

OD 4.75mm x ID 1.7mm (adapt-a-plug size C) seems to fit the best. 

OD 4.0mm x ID 1.7mm (adapt-a-plug size B) also worked but was not as snug as the C.

Thanks Rusty!!!
GAKables: Custom XLR, Digi & Batt Cables http://taperssection.com/index.php?topic=133186.0

Mics: Schoeps CMC6 x 4, Schoeps CMC1K x 2 / Schoeps KC 5G x 2 / Schoeps MK4,MK41,MK21,MK22 x 2 / Austrian Audio OC818 Dual Set+ / Telefunken TF-11 x 2 / Telefunken ELA M 260 x 4 / Telefunken M960FS x 2 / TK60,TK61,TK62 x 2 / Telefunken M60,TK60 x 2 / AKG c426b / AKG c34 / nBob AKG Actives>PFA x 4 / CK61,CK63,CK8 x 2 / AT853 4.7k Mod (Card,Sub)
Pres: Sonosax SX-AD8+ / Sonosax SX-M2D2 / Sonosax SX-M2 / Lunatec V3
Recs: Sonosax SX-R4+ / Sound Devices MixPre-6ii / Marantz PMD-661 / Roland R-07 / Zoom F3

My Recordings: https://archive.org/search.php?query=taper%3A%28Gakidis%29&sort=-da

Online Gutbucket

  • record > listen > revise technique
  • Trade Count: (15)
  • Needs to get out more...
  • *****
  • Posts: 15700
  • Gender: Male
  • "Better to love music than respect it" ~Stravinsky
Re: Equipment, External Battery, Voltage and DC Plug Size Info
« Reply #55 on: March 09, 2016, 09:31:25 PM »
Thanks for this great resource Ted!

I'm making up a battery supply power cable for the DR-680mkII (I've yet to use the mkII version of the 680 without AC power) and noticed the voltage note in this list:

Quote
Tascam DR-680 / 8-13v / Size M, 5.50mm OD × 2.10mm ID / Center pin (+)  Ring (-)
Tascam DR-680mkII / 12v / Size C, OD 4.75mm x ID 1.7mm Center Pin (+) Ring (-)

I've always powered my MK1 with 9V DVD batteries.  Will those not work with the MKII? Does it require the full 12V? Any one run the MKII successfully on 9V?

I should probably ask in the team 680 thread.  I'll report back here once I find out.
musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<< (note: This is a 1st draft, now several years old and in need of revision!  Stay tuned)

Offline larrysellers

  • Trade Count: (35)
  • Needs to get out more...
  • *****
  • Posts: 2152
  • Gender: Male
  • Qualified
Re: Equipment, External Battery, Voltage and DC Plug Size Info
« Reply #56 on: June 15, 2016, 08:59:33 PM »
Really great info.

Offline Taper Chris

  • Trade Count: (7)
  • Taperssection Regular
  • **
  • Posts: 223
  • Gender: Male
  • wusupwitit?
    • what I've posted on archive
Re: Equipment, External Battery, Voltage and DC Plug Size Info
« Reply #57 on: February 16, 2017, 01:18:18 PM »
Any one know the power plug dimensions for the tascam dr-44wl are?
"The thing about choosing the lesser of two evils is that your still choosing evil." JG

Offline tgakidis

  • Trade Count: (552)
  • Needs to get out more...
  • *****
  • Posts: 5749
  • Gender: Male
    • My Recordings on the Archive:
Re: Equipment, External Battery, Voltage and DC Plug Size Info
« Reply #58 on: February 16, 2017, 01:44:51 PM »
Any one know the power plug dimensions for the tascam dr-44wl are?

 I believe it is powered through the Micro-B type 4pin USB port
GAKables: Custom XLR, Digi & Batt Cables http://taperssection.com/index.php?topic=133186.0

Mics: Schoeps CMC6 x 4, Schoeps CMC1K x 2 / Schoeps KC 5G x 2 / Schoeps MK4,MK41,MK21,MK22 x 2 / Austrian Audio OC818 Dual Set+ / Telefunken TF-11 x 2 / Telefunken ELA M 260 x 4 / Telefunken M960FS x 2 / TK60,TK61,TK62 x 2 / Telefunken M60,TK60 x 2 / AKG c426b / AKG c34 / nBob AKG Actives>PFA x 4 / CK61,CK63,CK8 x 2 / AT853 4.7k Mod (Card,Sub)
Pres: Sonosax SX-AD8+ / Sonosax SX-M2D2 / Sonosax SX-M2 / Lunatec V3
Recs: Sonosax SX-R4+ / Sound Devices MixPre-6ii / Marantz PMD-661 / Roland R-07 / Zoom F3

My Recordings: https://archive.org/search.php?query=taper%3A%28Gakidis%29&sort=-da

Offline n3mmr

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 28
Re: Equipment, External Battery, Voltage and DC Plug Size Info
« Reply #59 on: March 10, 2017, 10:06:58 AM »
Tascam DR-680mkII / 12v / Size C, OD 4.75mm x ID 1.7mm Center Pin (+) Ring (-)
is what the threadstart says.

Does anyone know what the voltage limits actually are?
The entry for the original 680 says 8-13 V.
And I'm worried that my homebuilt power pack might harm my 680mkII.

Does anyone know for sure?
« Last Edit: March 10, 2017, 10:12:51 AM by n3mmr »

 

RSS | Mobile
Page created in 0.124 seconds with 44 queries.
© 2002-2024 Taperssection.com
Powered by SMF