Adding these here as they have taken all the links down.
Professional 2-channel audio recorder with dual AD converters, sampling rates up to 192 kHz, resolution up to 32-bit float
Receives and sends timecode (LTC) for synchronisation with a video camera, simplifies post-production (Tentacle-ready)
Wireless timecode synchronisation possible with Atomos products*
Bluetooth audio monitoring possible with optional Tascam AK-BT2
Tascam Recorder Connect app allows integrated management of multiple FR-AV2 and DR-10L Pro* units
Two XLR/TRS microphone/line combo inputs (48 V or 24 V phantom power)
Ultra-compact user interface with 2-inch (5-cm) colour LCD
Other features
Ultra low-noise Tascam Ultra HDDA microphone preamplifier
High-precision clock generator (TCXO – Temperature Compensated Chrystal Oscillator)
Additional mini-jack input for audio from camera, wireless microphone receiver or plug-in powered microphones (2.5 V or 5 V)
Mini-jack output with adjustable attenuation allows audio to be sent to cameras and other devices
Switchable low-cut filter, compressor, limiter and noise gate for the inputs
3.5-mm stereo headphones jack
Built-in 2×2 USB audio interface, supports 32-bit float resolution
Adjustable input delay to compensate for distance between microphones (0–300 ms)
Adjustable output delay to compensate for time lag between camera video and audio output (0–300 ms)
Compact, lightweight and robust fiberglass enclosure designed for use with camera rigs
Various mark and auto-slate tone functions
Supports microSD/microSDHC/microSDXC recording media up to 512 Gigabytes
Metadata can be recorded (BEXT and iXML for WAV files)
Long-term recording with 3 AA batteries
Power can also be supplied via USB-C port
Specifications
Recorder specifications
Recording media
microSD (64 MB – 2 GB)
microSDHC (4–32 GB)
microSDXC (48–512 GB)
Recording/playback format
WAV (BWF)
Sampling frequency
48 kHz, 96 kHz, 192 kHz
Quantization bit depth
24 bit, 32 bit float
Input channels
2
Maximum number of recordable tracks
2
Analogue audio inputs and outputs
Microphone input (balanced)
XLR-3-31 (1: GND, 2: HOT, 3: COLD)
Maximum input level
+4 dBu
Minimum input level
–76 dBu
Gain adjustment range
0–50 dB
Input impedance
≥2 kΩ
Phantom power
24 V, 48 V
Line input (balanced)
6.3-mm standard TRS jacks
(Tip = HOT, Ring = COLD, Sleeve = GND)
Maximum input level
+24 dBu
Nominal input level
+4 dBu (GAIN at minimum)
Input impedance
≥8 kΩ
Line/timecode input (unbalanced)
3.5-mm stereo mini jack
Maximum input level
1 dBV
Nominal input level
–19 dBV (GAIN at minimum)
Minimum input level
–79 dBV
Input Impedance
≥6 kΩ (plug-in power off)
≥1.6 kΩ (plug-in power on)
Plug-in power
2.5 V, 5 V
Analogue audio outputs
Line/timecode output (unbalanced)
3.5-mm stereo mini jack
Maximum output level
+6 dBV
Nominal output level
–14 dBV
Output impedance
210 Ω
Headphones output
3.5-mm stereo mini jack
Maximum output power
50 mW + 50 mW (THD+N <0.1 % at 32 Ω)
Recommended headphones impedance
16–400 Ω
USB
Connector
USB Type-C
Transfer format
USB 2.0 HIGH SPEED
Device Class
Mass Storage Class
USB Audio Class 2.0
USB Audio
Sampling frequency
48 kHz, 96 kHz
Quantization bit depth
24 bit, 32 bit float
Number of inputs/outputs
2/2 channels
Timecode input/output
Timecode input
3.5-mm stereo mini jack
(Tip: Timecode IN, Ring: Not used, Sleeve: GND)
Input impedance
≥10 kΩ
Signal level range
0.5 to 5 Vpp
Timecode output
3.5-mm stereo mini jack
LTC selected
Terminal assignment
Tip: Timecode, Ring: Not used, Sleeve: GND
Output impedance
600 Ω
Output level
2 Vpp
MIC LEVEL selected
Terminal assignment
Tip: Timecode, Ring: right channel, Sleeve: GND
Output impedance
110 Ω
Output level
40 mVpp
Audio performance
EIN (equivalent input noise, mic preamp)
≤–127 dBu
Frequency response (input jacks to PCM data)
48 kHz: 20 Hz – 20 kHz, +0 dB / –0.5 dB
96 kHz: 20 Hz – 40 kHz, +0.5 dB / –1 dB
192 kHz: 20 Hz – 60 kHz, +0.5 dB / –3 dB
Dynamic range (input jacks to PCM data)
≥132 dB
(20-kHz SPCL LPF, A-weighting)
Total harmonic distortion ratio (THD+N, input jacks to PCM data)
≤0.02 %
(1 kHz sine wave, −1 dBFS input, GAIN at minimum, 20-kHz SPCL LPF)
Battery operation time
Conditions
Stereo recording at 48 kHz, both input jacks used, continuous operation, in hours:minutes (JEITA CP-2905)
Alkaline battery (Evolta)
09:00
Phantom power off, 24-bit resolution
04:30
Phantom power on (48 V, 2 × 3 mA), 32-bit float
NiMH battery (Eneloop)
08:30
Phantom power off, 24-bit resolution
05:30
Phantom power on (48 V, 2 × 3 mA), 32-bit float
Lithium battery (Energizer Ultimate Lithium)
15:00
Phantom power off, 24-bit resolution
10:00
Phantom power on (48 V, 2 × 3 mA), 32-bit float
Note: Operation times may vary depending on the microphones being used.
Power supply and other specifications
Power sources
3 AA batteries (alkaline, NiMH, lithium-ion)
USB bus power
TASCAM PS-P520U AC adapter (sold separately)
Power consumption
3.8 W (maximum)
Dimensions (W x H x D, overall)
99 mm × 80 mm × 40 mm
Weight
267 g (including batteries)
195 g (without batteries)
Operating temperature range
0–40 °C
Included items
Safety guide, Tascam ID registration guide
* Requires optional Bluetooth adapter AK-BT1 or AK-BT2