Taperssection.com
Gear / Technical Help => Microphones & Setup => Topic started by: Sunshy on April 02, 2024, 02:09:15 PM
-
Hi All. I was looking to get a dedicated ORTF clip for my MKH40s. I found the one below which is a bit pricey. Any other ones on there? I tried setting it up on the rycote stereo bar but the MKH40s are too long to set up as ORTF without the bodies getting in the way.
https://www.shapeways.com/product/ZMSB2SZN5/ortf-mkh40-v3
-
The Shapeways mounts aren't very expensive compared to brand name accessories for mics that cost in the thousands but I totally understand wanting to save money where you can.
You could try using a spacer under one of your mounts to elevate it so you can cross the mics without them interfering with each other. Like this - https://www.sweetwater.com/store/detail/QK2B--on-stage-stands-qk-2b-quik-release-mic-adapter-black-single (https://www.sweetwater.com/store/detail/QK2B--on-stage-stands-qk-2b-quik-release-mic-adapter-black-single)
-
You're probably right. I lost one of my MKH 40 clips and, since a new one costs $36 I thought I'd just put the money into the shapeways mount since I mostly record in ORTF with those. Thanks for the input!