Become a Site Supporter and Never see Ads again!

Author Topic: Male RA Neutrik Screw Size  (Read 3743 times)

0 Members and 1 Guest are viewing this topic.

Offline fleish

  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 3209
  • Gender: Male
  • I've been safariing since before you were born
Male RA Neutrik Screw Size
« on: May 30, 2009, 03:28:23 PM »
Can someone please tell me what screw size is used in this type of connector? And possibly where I could find them? One pair of my XLR's is missing a 1 of the 2 screws on each cable. I tried bringing the screw to the hardware store and they indicated it'd be "smaller than an M3" which was the smallest they had. Based on that information I tried calling Radio Shack & Home Depot only to have both tell me they don't have screws smaller than that. Thanks in advance.
Mics: AT853, MC930, AK40/AK50 > LC3 > KM100, ADK TL51
Cables: Audio Magic XStream silver, Kind Kables, Zaolla M1.5
Decks: D8, Busman Hybrid R4

My LMA tapes: http://archive.org/search.php?query=taper%3A%22Todd+Fleisher%22

My LMA transfers: http://archive.org/search.php?query=-taper%3A%28Todd%20Fleisher%29%20AND%20transferer%3A%28Todd%20Fleisher%29

My LMA uploads: http://archive.org/search.php?query=collection%3Aetree%20AND%20uploader%3A%28todd%40fleish.org%29

Awesome. David said you were like The Wolf in Pulp Fiction. Shows up just in time with tons of gear, does a pro job, and disappears into the night! :-)

Offline goodcooker

  • Trade Count: (43)
  • Needs to get out more...
  • *****
  • Posts: 4638
  • Gender: Male
  • goes to 11
Re: Male RA Neutrik Screw Size
« Reply #1 on: May 30, 2009, 08:38:00 PM »
Can someone please tell me what screw size is used in this type of connector? And possibly where I could find them? One pair of my XLR's is missing a 1 of the 2 screws on each cable. I tried bringing the screw to the hardware store and they indicated it'd be "smaller than an M3" which was the smallest they had. Based on that information I tried calling Radio Shack & Home Depot only to have both tell me they don't have screws smaller than that. Thanks in advance.

I've got some extras from making stubbies out of them. I'll drop a few in an envelope for ya next week when I get back home.....if you haven't had any luck by then.
Line Audio CM3/OM1 || MBHO KA500 hyper>PFA|| ADK A51 type IV || AKG C522XY
Oade Warm Mod and Presence+ Mod UA5s || Aerco MP2(needs help) || Neve Portico 5012 || Apogee MMP
SD Mixpre6 || Oade Concert Mod DR100mkii

pocket sized - CA11 cards > SP SB10 > Sony PCM A10

http://www.archive.org/bookmarks/goodcooker

"Are you the Zman?" - fan at Panic 10-08-10 Kansas City
"I don't know who left this perfectly good inflatable wook doll here, but if I'm blowing her up, I'm keeping her." -  hoppedup

Offline fleish

  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 3209
  • Gender: Male
  • I've been safariing since before you were born
Re: Male RA Neutrik Screw Size
« Reply #2 on: June 01, 2009, 01:09:06 PM »
Thanks for the offer, hit me up when you're back home. Also, I'd still like to know what the screw size is for future reference if anyone knows.
Mics: AT853, MC930, AK40/AK50 > LC3 > KM100, ADK TL51
Cables: Audio Magic XStream silver, Kind Kables, Zaolla M1.5
Decks: D8, Busman Hybrid R4

My LMA tapes: http://archive.org/search.php?query=taper%3A%22Todd+Fleisher%22

My LMA transfers: http://archive.org/search.php?query=-taper%3A%28Todd%20Fleisher%29%20AND%20transferer%3A%28Todd%20Fleisher%29

My LMA uploads: http://archive.org/search.php?query=collection%3Aetree%20AND%20uploader%3A%28todd%40fleish.org%29

Awesome. David said you were like The Wolf in Pulp Fiction. Shows up just in time with tons of gear, does a pro job, and disappears into the night! :-)

Offline yossi3080

  • Trade Count: (1)
  • Taperssection Newbie
  • *
  • Posts: 37
  • Gender: Male
Re: Male RA Neutrik Screw Size
« Reply #3 on: July 27, 2009, 07:53:03 AM »
Hey there-anyone else have some extras of these? Or a suggestion as to where I could get them-I need a couple as well-happy to pay!

Yossi

Offline fleish

  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 3209
  • Gender: Male
  • I've been safariing since before you were born
Re: Male RA Neutrik Screw Size
« Reply #4 on: August 14, 2009, 03:01:53 PM »
Hey there-anyone else have some extras of these? Or a suggestion as to where I could get them-I need a couple as well-happy to pay!

Yossi

I've got 3 leftovers from the ones sent to me. If you want to PM me your address I'd be happy to send 2 of them on to you. I'm keeping the 3rd for a spare & as a comparison screw to hopefully one day find out what size it really is.
Mics: AT853, MC930, AK40/AK50 > LC3 > KM100, ADK TL51
Cables: Audio Magic XStream silver, Kind Kables, Zaolla M1.5
Decks: D8, Busman Hybrid R4

My LMA tapes: http://archive.org/search.php?query=taper%3A%22Todd+Fleisher%22

My LMA transfers: http://archive.org/search.php?query=-taper%3A%28Todd%20Fleisher%29%20AND%20transferer%3A%28Todd%20Fleisher%29

My LMA uploads: http://archive.org/search.php?query=collection%3Aetree%20AND%20uploader%3A%28todd%40fleish.org%29

Awesome. David said you were like The Wolf in Pulp Fiction. Shows up just in time with tons of gear, does a pro job, and disappears into the night! :-)

Offline alienbobz

  • Trade Count: (3)
  • Taperssection All-Star
  • ****
  • Posts: 1149
  • Gender: Male
Re: Male RA Neutrik Screw Size
« Reply #5 on: October 05, 2009, 01:22:59 AM »
Anyone have extra of these screws or know where I can get some? I was gonna bring it to home depot and see if they had any but I am guessing no. I lost it at a concert and used one from a cable I wasn't using that night.
-Out of the game for a bit, probably forever-

Audio Setup:
Apogee Mini-MP
Zoom H6

Video Setup:
Canon Vixia HF G20
Rode NTG-2
Azden SGM-1X

Misc:
Behringer C-2s, Marshall MXL 1006BPs, Naiant MSH-1s

Offline fleish

  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 3209
  • Gender: Male
  • I've been safariing since before you were born
Re: Male RA Neutrik Screw Size
« Reply #6 on: October 07, 2009, 05:17:59 PM »
^see my last post alienbobz
Mics: AT853, MC930, AK40/AK50 > LC3 > KM100, ADK TL51
Cables: Audio Magic XStream silver, Kind Kables, Zaolla M1.5
Decks: D8, Busman Hybrid R4

My LMA tapes: http://archive.org/search.php?query=taper%3A%22Todd+Fleisher%22

My LMA transfers: http://archive.org/search.php?query=-taper%3A%28Todd%20Fleisher%29%20AND%20transferer%3A%28Todd%20Fleisher%29

My LMA uploads: http://archive.org/search.php?query=collection%3Aetree%20AND%20uploader%3A%28todd%40fleish.org%29

Awesome. David said you were like The Wolf in Pulp Fiction. Shows up just in time with tons of gear, does a pro job, and disappears into the night! :-)

Offline alienbobz

  • Trade Count: (3)
  • Taperssection All-Star
  • ****
  • Posts: 1149
  • Gender: Male
Re: Male RA Neutrik Screw Size
« Reply #7 on: October 08, 2009, 12:20:34 AM »
Message sent. Thanks :D
-Out of the game for a bit, probably forever-

Audio Setup:
Apogee Mini-MP
Zoom H6

Video Setup:
Canon Vixia HF G20
Rode NTG-2
Azden SGM-1X

Misc:
Behringer C-2s, Marshall MXL 1006BPs, Naiant MSH-1s

 

RSS | Mobile
Page created in 0.235 seconds with 36 queries.
© 2002-2024 Taperssection.com
Powered by SMF