Taperssection.com

Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: 1st set only on June 08, 2004, 03:50:14 PM

Title: Matrix using a ua5 with digi in and mics
Post by: 1st set only on June 08, 2004, 03:50:14 PM
hey all probably been mentioned before but can a digi mod ua5 make a matrix with say a coax feed from a mini-me and mics coming into the front of the ua5? I just dont know if you could mix digital and analog sources at once.

danka


d
Title: Re: Matrix using a ua5 with digi in and mics
Post by: Matt Quinn on June 08, 2004, 04:05:41 PM
I don't *think* so, but am not sure.
I know you have to choose digi or analog on the front panel as a record source, so I imagine that if you're running mics the digi in is gonna be disabled.

Any particular reason you wouldn't just feed the UA5 the analog signal? 
Title: Re: Matrix using a ua5 with digi in and mics
Post by: 1st set only on June 08, 2004, 04:23:59 PM
Quote from: The_Tube on June 08, 2004, 04:05:41 PM
Any particular reason you wouldn't just feed the UA5 the analog signal? 

4 mic mix
Title: Re: Matrix using a ua5 with digi in and mics
Post by: twatts (pants are so over-rated...) on June 08, 2004, 04:41:00 PM
Quote from: The Donald on June 08, 2004, 04:23:59 PM
Quote from: The_Tube on June 08, 2004, 04:05:41 PM
Any particular reason you wouldn't just feed the UA5 the analog signal? 

4 mic mix
???  4 mic mix doesn't REQUIRE digi-in on the UA5...  Run the analog out from the min-me into the RCA input on the back of the UA5 and your other pair of mics nto the front - viola, 4 mic mix!

T

Title: Re: Matrix using a ua5 with digi in and mics
Post by: 1st set only on June 08, 2004, 04:48:10 PM
the analog out on a mini me is a headphone out. thought that was a bad idea
Title: Re: Matrix using a ua5 with digi in and mics
Post by: gallowayJ on June 15, 2004, 05:51:11 PM
from my experience the UA5 will NOT pass a digital input signal into digital out.  So the only way to do a matrix is using the analog inputs.

jacob
Title: Re: Matrix using a ua5 with digi in and mics
Post by: John Kelly on June 15, 2004, 07:50:07 PM
If you want to do a four mic mix you have to use the analog inputs.