Taperssection.com

Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: THE NIZ BIAAAAACH! on January 13, 2004, 07:50:28 PM

Title: MMP RUN TIME?
Post by: THE NIZ BIAAAAACH! on January 13, 2004, 07:50:28 PM

I don't know if anyone besides my and shitty tapes are running this rig, but it seemed to suck my 6V with the mme plugged into also in about 1:45 min.  If anyone has any info please let me know.  

Title: Re:MMP RUN TIME?
Post by: Tim on January 13, 2004, 08:07:04 PM

what's the current draw? how many AH was the 6v?

Title: Re:MMP RUN TIME?
Post by: THE NIZ BIAAAAACH! on January 13, 2004, 08:10:48 PM

It does'nt say anywhere in the manual what the draw is.  How lame is that, the whole thing is like 8 or 9 pages.  7.2 amp hrs 6v.  I could figure it out if I knew what it drew.  

Title: Re:MMP RUN TIME?
Post by: DaryanLenz on January 13, 2004, 08:16:03 PM

The draw is the same as the mini-me, I think .5 amp's or something like that.  I run both the mme and mmp off of the same 6volt, 10amph battery.  

Per the apogee site:

The Mini-MP is not critical about its power-supply at all; any DC voltage 6-14 Volt at 1 Amp will be sufficient.


Does that tell you what you wanted to know?????

Hope this helps

D

Title: Re:MMP RUN TIME?
Post by: Sean Gallemore on January 14, 2004, 01:24:40 AM

too bad nizz won't be needing this info anymore :(