Author Topic: 2 Schoeps KC5 chopped to a single TA6M (Read 10197 times)

jdwtyl · « **on:** February 12, 2020, 09:27:55 PM »

Will anyone on here do this? If so please let me know, thanks a lot!

DSatz · « **Reply #1 on:** February 13, 2020, 09:20:03 PM »

I'm just curious what you will connect them to. You do know that you can't simply phantom-power a pair of Colette cables, right? They need two specific voltages, a low one for the FET (6.2 Volts if I recall correctly) and about 60 Volts to polarize the capsule, although the latter voltage sees an extremely high impedance--almost no current is required.

--best regards

jdwtyl · « **Reply #2 on:** February 13, 2020, 09:41:34 PM »

Jon said he can build a 60V PFA.

F.O.Bean · « **Reply #3 on:** March 31, 2020, 01:55:00 AM »

Id love to see this setup after it completed

edtyre · « **Reply #4 on:** June 16, 2020, 05:16:48 PM »

Nicky C modded a set of KC5's for me so i could run them with an Nbox or with a PFA
It's not a simple cable change with the two voltages as D Satz stated.

I have a PFA for sale if anybody needs

Sebastian · « **Reply #5 on:** June 17, 2020, 05:32:35 AM »

If you have a PFA, modding the KC5s is no real problem. The Schoeps capsule connectors are really easy to open, unlike the NBobs.

Author Topic: 2 Schoeps KC5 chopped to a single TA6M (Read 10197 times)

jdwtyl

2 Schoeps KC5 chopped to a single TA6M

DSatz

Re: 2 Schoeps KC5 chopped to a single TA6M

jdwtyl

Re: 2 Schoeps KC5 chopped to a single TA6M

F.O.Bean

Re: 2 Schoeps KC5 chopped to a single TA6M

edtyre

Re: 2 Schoeps KC5 chopped to a single TA6M

Sebastian

Re: 2 Schoeps KC5 chopped to a single TA6M