Topic: MixPre 10 II Power Options???

[dueling]

I am sure it's out there but I cannot find the MixPre 10 II power options thread.  Can someone please direct me there? My MP10 will only power up with the wall plug. I thought it powered up by USB-C?  Thank you!

[jbell]

You can only power it with the Hirose connector and/or battery sled.  It doesn't power with the usbc like the Mixpre 3/6.  IMO the hirose is a much better option and more secure.

I am sure it's out there but I cannot find the MixPre 10 II power options thread.  Can someone please direct me there? My MP10 will only power up with the wall plug. I thought it powered up by USB-C?  Thank you!

[dueling]

Ah, ok thank you. I did not know that.  I guess I should have started this thred in the remote power section.  Sorry admins!

Thanks again for the help.

[dueling]

You can only power it with the Hirose connector and/or battery sled.  It doesn't power with the usbc like the Mixpre 3/6.  IMO the hirose is a much better option and more secure.

I am sure it's out there but I cannot find the MixPre 10 II power options thread.  Can someone please direct me there? My MP10 will only power up with the wall plug. I thought it powered up by USB-C?  Thank you!

How long will the battery sled give me in the field running 6 channels?  Any idea?  and is there a portable Hirose battery option?  Thanks!

[jbell]

I don't think you would get more that 2 hours with the AA sled with more than 2 channels.  Order a Hirose > M tip battery cable from Ted.  Then you can buy a talent cell or Max Oak battery depending on your powering needs. 

https://www.amazon.com/dp/B016BJCRUO?ref=nb_sb_ss_w_as-reorder-t1_ypp_rep_k0_1_11&amp&crid=3N688WASQGBPN&amp&sprefix=talentcell+

https://www.amazon.com/MAXOAK-50000mAh-Portable-Charger-External/dp/B00YP823NA/ref=sr_1_4?crid=1AWI6L9MVOV3L&keywords=maxoak+power+bank&qid=1657408524&s=electronics&sprefix=Max+Oak+po%2Celectronics%2C78&sr=1-4&ufe=app_do%3Aamzn1.fos.18ed3cb5-28d5-4975-8bc7-93deae8f9840

You can only power it with the Hirose connector and/or battery sled.  It doesn't power with the usbc like the Mixpre 3/6.  IMO the hirose is a much better option and more secure.

I am sure it's out there but I cannot find the MixPre 10 II power options thread.  Can someone please direct me there? My MP10 will only power up with the wall plug. I thought it powered up by USB-C?  Thank you!

How long will the battery sled give me in the field running 6 channels?  Any idea?  and is there a portable Hirose battery option?  Thanks!

[dueling]

Where can I get in touch with Ted?  Also, I'd like this thing to be able to power 6 channels and run for a pretty long time.  Battery pack suggestions?  The larger one below? Thank you for your help!!!

I don't think you would get more that 2 hours with the AA sled with more than 2 channels.  Order a Hirose > M tip battery cable from Ted.  Then you can buy a talent cell or Max Oak battery depending on your powering needs. 

https://www.amazon.com/dp/B016BJCRUO?ref=nb_sb_ss_w_as-reorder-t1_ypp_rep_k0_1_11&amp&crid=3N688WASQGBPN&amp&sprefix=talentcell+

https://www.amazon.com/MAXOAK-50000mAh-Portable-Charger-External/dp/B00YP823NA/ref=sr_1_4?crid=1AWI6L9MVOV3L&keywords=maxoak+power+bank&qid=1657408524&s=electronics&sprefix=Max+Oak+po%2Celectronics%2C78&sr=1-4&ufe=app_do%3Aamzn1.fos.18ed3cb5-28d5-4975-8bc7-93deae8f9840

You can only power it with the Hirose connector and/or battery sled.  It doesn't power with the usbc like the Mixpre 3/6.  IMO the hirose is a much better option and more secure.

I am sure it's out there but I cannot find the MixPre 10 II power options thread.  Can someone please direct me there? My MP10 will only power up with the wall plug. I thought it powered up by USB-C?  Thank you!

How long will the battery sled give me in the field running 6 channels?  Any idea?  and is there a portable Hirose battery option?  Thanks!

[jbell]

Here is Ted He can get a cable sorted!

https://taperssection.com/index.php?topic=133186.0

I would do the Max Oak battery if you are running 6 channels!  That will cover you.

[dueling]

Awesome.. Thank you!!!

Here is Ted He can get a cable sorted!

https://taperssection.com/index.php?topic=133186.0

I would do the Max Oak battery if you are running 6 channels!  That will cover you.

[SMsound]

Whoa...I use a MixPre-6 running phantom on 4 channels with full brightness, and I power that with a little $25 Anker 10,000mah battery for hours. The MaxOak linked above is a $130  50,000mAh. Seems like mega overkill in terms of mah for concerts (even with the MP10's extra channels), no?

Awesome.. Thank you!!!

Here is Ted He can get a cable sorted!

https://taperssection.com/index.php?topic=133186.0

I would do the Max Oak battery if you are running 6 channels!  That will cover you.

[jbell]

The Mixpre 10 doesn't use usbc for power!  It needs at least 12v.  So for 6 channels it will work great.  I used mine for 12 hours a day only running 2 channels at a festival and it used half the battery power.  I'd rather have the extra power and not need it then need it and not have it.

Whoa...I use a MixPre-6 running phantom on 4 channels with full brightness, and I power that with a little $25 Anker 10,000mah battery for hours. The MaxOak linked above is a $130  50,000mAh. Seems like mega overkill in terms of mah for concerts (even with the MP10's extra channels), no?

Awesome.. Thank you!!!

Here is Ted He can get a cable sorted!

https://taperssection.com/index.php?topic=133186.0

I would do the Max Oak battery if you are running 6 channels!  That will cover you.

[mgtaper]

I'm using this battery to power my mix pre 10 ii plus other devices as needed.

https://www.amazon.com/Juicebox-Battery-Charger-US-Based-Warranty/dp/B07HCNQTX8/ref=sr_1_1?crid=2W555OO4TY923&keywords=Juicebox+Gold+Mount+Battery+%26+Charger+%2895Wh%29%2C+US-Based+Warranty&qid=1657556825&s=electronics&sprefix=juicebox+gold+mount+battery+%26+charger+95wh+%2C+us-based+warranty%2Celectronics%2C107&sr=1-1

Using this cable:
https://www.amazon.com/SZRMCC-Anton-Hirose-Zaxcom-Devices/dp/B0869518CZ/ref=sr_1_2?crid=3JM46V2ZRECBJ&keywords=SZRMCC%2BAnton-Bauer%2BIDX%2BD-Tap%2Bto%2BThin%2BRight%2BAngle%2BHirose%2B4%2Bpin%2BMale%2BPower%2BCable%2Bfor%2BZaxcom%2BSound%2BDevices%2B688%2B644%2B633&qid=1657557001&s=industrial&sprefix=szrmcc%2Banton-bauer%2Bidx%2Bd-tap%2Bto%2Bthin%2Bright%2Bangle%2Bhirose%2B4%2Bpin%2Bmale%2Bpower%2Bcable%2Bfor%2Bzaxcom%2Bsound%2Bdevices%2B688%2B644%2B633%2Cindustrial%2C56&sr=1-2&th=1

[jbell]

Nice, I will keep this on my wish list.  What kind of run times are you getting??

I'm using this battery to power my mix pre 10 ii plus other devices as needed.

https://www.amazon.com/Juicebox-Battery-Charger-US-Based-Warranty/dp/B07HCNQTX8/ref=sr_1_1?crid=2W555OO4TY923&keywords=Juicebox+Gold+Mount+Battery+%26+Charger+%2895Wh%29%2C+US-Based+Warranty&qid=1657556825&s=electronics&sprefix=juicebox+gold+mount+battery+%26+charger+95wh+%2C+us-based+warranty%2Celectronics%2C107&sr=1-1

Using this cable:
https://www.amazon.com/SZRMCC-Anton-Hirose-Zaxcom-Devices/dp/B0869518CZ/ref=sr_1_2?crid=3JM46V2ZRECBJ&keywords=SZRMCC%2BAnton-Bauer%2BIDX%2BD-Tap%2Bto%2BThin%2BRight%2BAngle%2BHirose%2B4%2Bpin%2BMale%2BPower%2BCable%2Bfor%2BZaxcom%2BSound%2BDevices%2B688%2B644%2B633&qid=1657557001&s=industrial&sprefix=szrmcc%2Banton-bauer%2Bidx%2Bd-tap%2Bto%2Bthin%2Bright%2Bangle%2Bhirose%2B4%2Bpin%2Bmale%2Bpower%2Bcable%2Bfor%2Bzaxcom%2Bsound%2Bdevices%2B688%2B644%2B633%2Cindustrial%2C56&sr=1-2&th=1

[mgtaper]

I'm not exactly sure on run-time since I'm also using the L-Series Battery mount:

https://www.bhphotovideo.com/c/product/1333782-REG/sound_devices_mx_lmount_battery_sled_holds_2.html

Using 2 of the F960/970 @ 7.4V 87mAh 64.5Wh batteries.

The last time I recharged, only down two bars on the Juice Box. About 1 day @ a festival.

[dueling]

I am testing out a run of all 6 channels with the MAXOAK battery.   35 mins in so far at 32bit float / 48 and the battery has not flintched.  Are there any out there that aren't so big and heavy, but still have great run times?  Thanks again for the tip!!!

What about this one?   https://www.amazon.com/gp/product/B07P87JTVT

I don't think you would get more that 2 hours with the AA sled with more than 2 channels.  Order a Hirose > M tip battery cable from Ted.  Then you can buy a talent cell or Max Oak battery depending on your powering needs. 

https://www.amazon.com/dp/B016BJCRUO?ref=nb_sb_ss_w_as-reorder-t1_ypp_rep_k0_1_11&amp&crid=3N688WASQGBPN&amp&sprefix=talentcell+

https://www.amazon.com/MAXOAK-50000mAh-Portable-Charger-External/dp/B00YP823NA/ref=sr_1_4?crid=1AWI6L9MVOV3L&keywords=maxoak+power+bank&qid=1657408524&s=electronics&sprefix=Max+Oak+po%2Celectronics%2C78&sr=1-4&ufe=app_do%3Aamzn1.fos.18ed3cb5-28d5-4975-8bc7-93deae8f9840

You can only power it with the Hirose connector and/or battery sled.  It doesn't power with the usbc like the Mixpre 3/6.  IMO the hirose is a much better option and more secure.

I am sure it's out there but I cannot find the MixPre 10 II power options thread.  Can someone please direct me there? My MP10 will only power up with the wall plug. I thought it powered up by USB-C?  Thank you!

How long will the battery sled give me in the field running 6 channels?  Any idea?  and is there a portable Hirose battery option?  Thanks!

[jbell]

You could get the Talentcell battery I linked!  It is smaller and lighter.  You aren't going to get as long of run times with 6 channels of p48, but a solid battery for normal shows. I have one as a backup.  I've never used the battery you linked, but it should work. 

I am testing out a run of all 6 channels with the MAXOAK battery.   35 mins in so far at 32bit float / 48 and the battery has not flintched.  Are there any out there that aren't so big and heavy, but still have great run times?  Thanks again for the tip!!!

What about this one?   https://www.amazon.com/gp/product/B07P87JTVT

I don't think you would get more that 2 hours with the AA sled with more than 2 channels.  Order a Hirose > M tip battery cable from Ted.  Then you can buy a talent cell or Max Oak battery depending on your powering needs. 

https://www.amazon.com/dp/B016BJCRUO?ref=nb_sb_ss_w_as-reorder-t1_ypp_rep_k0_1_11&amp&crid=3N688WASQGBPN&amp&sprefix=talentcell+

https://www.amazon.com/MAXOAK-50000mAh-Portable-Charger-External/dp/B00YP823NA/ref=sr_1_4?crid=1AWI6L9MVOV3L&keywords=maxoak+power+bank&qid=1657408524&s=electronics&sprefix=Max+Oak+po%2Celectronics%2C78&sr=1-4&ufe=app_do%3Aamzn1.fos.18ed3cb5-28d5-4975-8bc7-93deae8f9840

You can only power it with the Hirose connector and/or battery sled.  It doesn't power with the usbc like the Mixpre 3/6.  IMO the hirose is a much better option and more secure.

I am sure it's out there but I cannot find the MixPre 10 II power options thread.  Can someone please direct me there? My MP10 will only power up with the wall plug. I thought it powered up by USB-C?  Thank you!

How long will the battery sled give me in the field running 6 channels?  Any idea?  and is there a portable Hirose battery option?  Thanks!