Become a Site Supporter and Never see Ads again!

Author Topic: Just made new low-profile/chopped cables.  (Read 17465 times)

0 Members and 1 Guest are viewing this topic.

Offline checht

  • Site Supporter
  • Trade Count: (7)
  • Taperssection Member
  • *
  • Posts: 824
  • Let's meet at alternate foods at the break
Re: Just made new low-profile/chopped cables.
« Reply #15 on: March 14, 2023, 11:57:35 PM »
In ye olden days, I used room temperature vulcanizer to pot connectors and mic pres. Now I use silicon caulk in various colors. It is possible to cut and plier it out, though tedious.

Voltronic, can you share a link to the caps, I only find 'em for the CT connectors at Gotham. Thanks!
MK41s, MK22s; Vanguard V1s matched pair
Schoeps kcy5, nbob actives
Naiant PFA 60v, PFA 48v, IPA
Sound Devices MP-6II; Sony PCM-A10

Recordings at LMA

Offline SMsound

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 242
Re: Just made new low-profile/chopped cables.
« Reply #16 on: March 15, 2023, 12:56:50 AM »
Now I use silicon caulk in various colors.

That (silicone gasket sealant) is basically the same stuff that I used to add a bit of glue under the colored Sumito Sumitube heatshrink, since it's not adhesive lined.
waves -> bits

Offline voltronic

  • Trade Count: (40)
  • Needs to get out more...
  • *****
  • Posts: 4189
Re: Just made new low-profile/chopped cables.
« Reply #17 on: March 15, 2023, 12:05:59 PM »
In ye olden days, I used room temperature vulcanizer to pot connectors and mic pres. Now I use silicon caulk in various colors. It is possible to cut and plier it out, though tedious.

Voltronic, can you share a link to the caps, I only find 'em for the CT connectors at Gotham. Thanks!

They don't list them online; you have to email or call them. I think they charged me a buck or two each, but it was quite a long time ago that I bought them.

I have started researching inexpensive 3D printers after realizing how much money I've put into 3D printed items so far, and still wanting to modify those parts I have.
I am hitting my head against the walls, but the walls are giving way.
- Gustav Mahler

Acoustic Recording Techniques
Team Classical
Team Line Audio
Team DPA

Offline checht

  • Site Supporter
  • Trade Count: (7)
  • Taperssection Member
  • *
  • Posts: 824
  • Let's meet at alternate foods at the break
Re: Just made new low-profile/chopped cables.
« Reply #18 on: March 15, 2023, 03:57:44 PM »
Thanks, Voltronic. Here's what I learned just now:

A bag of 20 caps in 4 colors to fit Neutrik XX line costs 18.95 + shipping.
I called Gotham (212) 629-9430 and spoke with TJ.
MK41s, MK22s; Vanguard V1s matched pair
Schoeps kcy5, nbob actives
Naiant PFA 60v, PFA 48v, IPA
Sound Devices MP-6II; Sony PCM-A10

Recordings at LMA

 

RSS | Mobile
Page created in 0.026 seconds with 29 queries.
© 2002-2024 Taperssection.com
Powered by SMF