Become a Site Supporter and Never see Ads again!

Author Topic: Cleaning/reconditioning XLR cables  (Read 5163 times)

0 Members and 1 Guest are viewing this topic.

Offline WiFiJeff

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 987
  • Gender: Male
  • I tape therefore I am.
Cleaning/reconditioning XLR cables
« on: September 16, 2023, 11:22:23 AM »
I'm about to start up recording again for a concert series that has been inactive since before covid, my cables and setup gear (not mics or recorders) have been in storage in a closet since 3/20.  Although the area has not been subject to any extreme elements or humidity, I worry about oxidation of the XLR contacts.  Is there any recommended cleaner I could quickly use once I get access to the equipment about an hour or two before showtime?

Jeff

Offline BlueSky71

  • Trade Count: (6)
  • Taperssection Regular
  • **
  • Posts: 144
Re: Cleaning/reconditioning XLR cables
« Reply #1 on: September 16, 2023, 11:25:10 AM »

Offline WiFiJeff

  • Trade Count: (1)
  • Taperssection Member
  • ***
  • Posts: 987
  • Gender: Male
  • I tape therefore I am.
Re: Cleaning/reconditioning XLR cables
« Reply #2 on: September 16, 2023, 11:36:28 PM »
Thanks.  Put it on order tonight.

Offline tim in jersey

  • Site Supporter
  • Trade Count: (8)
  • Needs to get out more...
  • *
  • Posts: 3843
  • Gender: Male
Re: Cleaning/reconditioning XLR cables
« Reply #3 on: September 17, 2023, 07:58:30 PM »
I think the Hosa stuff is rebranded CAIG Deoxit. Seems expensive, but a small bottle lasts forever and is safe to squirt on gunky pots and attenuators. Check the formula first, though. There are several. Been a while since I read the material sheets...

Offline BlueSky71

  • Trade Count: (6)
  • Taperssection Regular
  • **
  • Posts: 144
Re: Cleaning/reconditioning XLR cables
« Reply #4 on: September 17, 2023, 08:05:14 PM »
I forgot, last time I needed some I found it locally at auto parts store for a reasonable price


https://www.autozone.com/miscellaneous-cleaners-and-degreasers/electrical-parts-cleaner/p/crc-qd-electronic-cleaner-11oz/128435_0_0

Offline goodcooker

  • Trade Count: (44)
  • Needs to get out more...
  • *****
  • Posts: 4871
  • Gender: Male
  • goes to 11
Re: Cleaning/reconditioning XLR cables
« Reply #5 on: September 18, 2023, 09:51:05 AM »
I forgot, last time I needed some I found it locally at auto parts store for a reasonable price


https://www.autozone.com/miscellaneous-cleaners-and-degreasers/electrical-parts-cleaner/p/crc-qd-electronic-cleaner-11oz/128435_0_0

That stuff is different that the Deoxit stuff. It cleans but does not lubricate. When using it on things that have mechanical friction (like potentiometers and cable jacks/plugs) you really should follow up with a lubricant that's safe for plastics.

I used an entire can of that when I started refurbishing my Hammond organ. It did a great job on the amp housing, tube sockets and all kinds of other places but I used Deoxit on any switches, slides or knobs.
Neumann KM140 || Line Audio CM3/OM1 || MBHO KA500 hyper>PFA|| ADK A51 type IV || AKG C522XY
Oade Warm Mod and Presence+ Mod UA5s || Aerco MP2(needs help) || Neve Portico 5012 || Apogee MMP
SD Mixpre6 || Oade Concert Mod DR100mkii || Tascam FR AV2

pocket sized - CA11 cards > SP SB10 > Sony PCM A10
70s style - Nakamichi CM300/cp1-2-3 > Nakamichi 500 cassette deck

http://www.archive.org/bookmarks/goodcooker

"Are you the Zman?" - fan at Panic 10-08-10 Kansas City
"I don't know who left this perfectly good inflatable wook doll here, but if I'm blowing her up, I'm keeping her." -  hoppedup

 

RSS | Mobile
Page created in 0.038 seconds with 30 queries.
© 2002-2024 Taperssection.com
Powered by SMF