Become a Site Supporter and Never see Ads again!

Author Topic: Custom cables In Canada? Ted G already asked to quote  (Read 8249 times)

0 Members and 1 Guest are viewing this topic.

Offline seethreepo

  • Trade Count: (11)
  • Taperssection All-Star
  • ****
  • Posts: 1348
  • Gender: Male
  • Resist Or Serve
Custom cables In Canada? Ted G already asked to quote
« on: March 02, 2024, 01:35:32 PM »
Does anyone in Canada or who will ship to Canada make custom XLR's? 
I already have sent Ted G an email
Is there anyone else open to making a pair of special low pro XLR cables ?
LMK.



"Never heard anyone say that music was the thing that fucked up their day" 
-Chris Robinson 1996-09-24
Mics:Schoeps Mk4, Sound Professionals - SP-CMC-8 , Marcsounds binaurals  Pre amps: Beyerdynamic MV-1 ,  Recorders:  Edirol R-44, Edirol R-09HR, Roland  R-05
Zoom H4N Pro
 
real recorder > phone
 external mics > Internal mics
 FOB > Taper Section
 HATS > better than Denied

Offline joeldotc

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 40
Re: Custom cables In Canada? Ted G already asked to quote
« Reply #1 on: March 02, 2024, 10:36:25 PM »
I'm not sure if anyone makes them (I'm sure you could find a few companies), but if you know how to solder (or are willing to learn), you could pick up something like these to make yourself some:

Low Profile XLR connector:
https://www.mouser.ca/ProductDetail/Switchcraft/AAA3MBLP?qs=qSfuJ%252Bfl%2Fd7BZD1TMhJE7w%3D%3D

0.205" Shielded Cable:
https://www.digikey.ca/en/products/detail/tensility-international-corp/30-02974/21349544

Wouldn't be too hard to make - plus you'd probably save money and learn a cool skill :)
« Last Edit: March 02, 2024, 10:38:05 PM by joeldotc »

Offline seethreepo

  • Trade Count: (11)
  • Taperssection All-Star
  • ****
  • Posts: 1348
  • Gender: Male
  • Resist Or Serve
Re: Custom cables In Canada? Ted G already asked to quote
« Reply #2 on: March 03, 2024, 12:12:29 AM »
I'm not sure if anyone makes them (I'm sure you could find a few companies), but if you know how to solder (or are willing to learn), you could pick up something like these to make yourself some:

Low Profile XLR connector:
https://www.mouser.ca/ProductDetail/Switchcraft/AAA3MBLP?qs=qSfuJ%252Bfl%2Fd7BZD1TMhJE7w%3D%3D

0.205" Shielded Cable:
https://www.digikey.ca/en/products/detail/tensility-international-corp/30-02974/21349544

Wouldn't be too hard to make - plus you'd probably save money and learn a cool skill :)

Thanks for the links, I’m just not interested in making them myself, I don’t see needing or wanting more pairs so to buy an iron, sodder, cable, XLR s would be overkill.
"Never heard anyone say that music was the thing that fucked up their day" 
-Chris Robinson 1996-09-24
Mics:Schoeps Mk4, Sound Professionals - SP-CMC-8 , Marcsounds binaurals  Pre amps: Beyerdynamic MV-1 ,  Recorders:  Edirol R-44, Edirol R-09HR, Roland  R-05
Zoom H4N Pro
 
real recorder > phone
 external mics > Internal mics
 FOB > Taper Section
 HATS > better than Denied

Offline Justy Gyee

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 491
  • Gender: Male
    • justys llama
Re: Custom cables In Canada? Ted G already asked to quote
« Reply #3 on: March 03, 2024, 11:36:52 AM »
ive offered numerous times to help build you whatever you need
if it aint broke, don't fix it

Offline goodcooker

  • Trade Count: (44)
  • Needs to get out more...
  • *****
  • Posts: 4860
  • Gender: Male
  • goes to 11
Re: Custom cables In Canada? Ted G already asked to quote
« Reply #4 on: March 03, 2024, 12:42:30 PM »

I'm firing up the cable making station next week to make a bunch of stuff.

Shoot me a pm with what you are looking for I may be able to help. I still have quite a lot of stock from when I made cables as a side gig.

I'm a little confused since you say in your OP that you want XLRs but later that XLR would be overkill.
Neumann KM140 || Line Audio CM3/OM1 || MBHO KA500 hyper>PFA|| ADK A51 type IV || AKG C522XY
Oade Warm Mod and Presence+ Mod UA5s || Aerco MP2(needs help) || Neve Portico 5012 || Apogee MMP
SD Mixpre6 || Oade Concert Mod DR100mkii

pocket sized - CA11 cards > SP SB10 > Sony PCM A10
70s style - Nakamichi CM300/cp1-2-3 > Nakamichi 500 cassette deck

http://www.archive.org/bookmarks/goodcooker

"Are you the Zman?" - fan at Panic 10-08-10 Kansas City
"I don't know who left this perfectly good inflatable wook doll here, but if I'm blowing her up, I'm keeping her." -  hoppedup

Offline joeldotc

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 40
Re: Custom cables In Canada? Ted G already asked to quote
« Reply #5 on: March 03, 2024, 02:27:13 PM »

I'm firing up the cable making station next week to make a bunch of stuff.

Shoot me a pm with what you are looking for I may be able to help. I still have quite a lot of stock from when I made cables as a side gig.

I'm a little confused since you say in your OP that you want XLRs but later that XLR would be overkill.

I think they just mean buying all the gear (solder, iron, cables, XLR connectors) would be overkill for only making a single set of cables. An iron and solder are pretty cheap and handy to have though so I feel like it’s not overkill even if it’s just one project.

Offline pohaku

  • Site Supporter
  • Trade Count: (35)
  • Taperssection All-Star
  • *
  • Posts: 1093
  • Gender: Male
Re: Custom cables In Canada? Ted G already asked to quote
« Reply #6 on: March 26, 2024, 11:26:45 AM »
Personally, I’ve always seen projects as an excuse to buy tools.  What’s not to like?
Mics: akg c460 (ck61, ck63), c414buls, c568eb; at4049a, 4051a, 4053a, at853; josephson c42; neumann U87, km84i; beyer m130, m160, m500; aea r84; gefell m71, mt711s, m200, m201, um70S; sony c38; schoeps cmc6, CMBI (mk4, mk21, mk41, mk4v); sennheiser mkh30, mkh40, md421, md431, md541; audix m1290
Pres: API, a-designs, pendulum, purple, millennia TD-1 and HV-32P, gt, littlebox, tinybox, usbpre2, CA 9200, pipsqueak, grace V2, DAV BG1
Cables: KCY, CMR, Naiant AKG actives, PFAs, asst.  GAKables and Darktrain
Recorders/converters/monitors: dr680, m10, dr-2d, d50, zoom f8 & F8n pro, 788T SSD CL-8, lynx aurora 8, Neumann KH20


Yeah, I'm an attorney, but everyone needs a day job

Offline Justy Gyee

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 491
  • Gender: Male
    • justys llama
Re: Custom cables In Canada? Ted G already asked to quote
« Reply #7 on: June 21, 2024, 10:29:19 AM »
stepped in and made c3pO some cables.
it got me to finally make all the cables ive been needing for years and a bunch i dont need.
chopped a pair of 15footers down to 9ft.
50ft xlr
20ft xlr
rca > xlr
1/4 > xlr
bnc > xlr
bnc > rca
if it aint broke, don't fix it

Offline voltronic

  • Trade Count: (40)
  • Needs to get out more...
  • *****
  • Posts: 4185
Re: Custom cables In Canada? Ted G already asked to quote
« Reply #8 on: June 21, 2024, 02:41:57 PM »
stepped in and made c3pO some cables.
it got me to finally make all the cables ive been needing for years and a bunch i dont need.
chopped a pair of 15footers down to 9ft.
50ft xlr
20ft xlr
rca > xlr
1/4 > xlr
bnc > xlr
bnc > rca

What cable stock did you use for the XLR pairs center and bottom-right? Looks like aircraft cable.
I am hitting my head against the walls, but the walls are giving way.
- Gustav Mahler

Acoustic Recording Techniques
Team Classical
Team Line Audio
Team DPA

Offline goodcooker

  • Trade Count: (44)
  • Needs to get out more...
  • *****
  • Posts: 4860
  • Gender: Male
  • goes to 11
Re: Custom cables In Canada? Ted G already asked to quote
« Reply #9 on: June 21, 2024, 03:09:42 PM »

^Looks like the same mil spec silver coated copper wire that a lot of us cable makers have used over the years. A bunch of manufacturers make it. One of the intended applications is aircraft comms.
Neumann KM140 || Line Audio CM3/OM1 || MBHO KA500 hyper>PFA|| ADK A51 type IV || AKG C522XY
Oade Warm Mod and Presence+ Mod UA5s || Aerco MP2(needs help) || Neve Portico 5012 || Apogee MMP
SD Mixpre6 || Oade Concert Mod DR100mkii

pocket sized - CA11 cards > SP SB10 > Sony PCM A10
70s style - Nakamichi CM300/cp1-2-3 > Nakamichi 500 cassette deck

http://www.archive.org/bookmarks/goodcooker

"Are you the Zman?" - fan at Panic 10-08-10 Kansas City
"I don't know who left this perfectly good inflatable wook doll here, but if I'm blowing her up, I'm keeping her." -  hoppedup

Offline Justy Gyee

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 491
  • Gender: Male
    • justys llama
Re: Custom cables In Canada? Ted G already asked to quote
« Reply #10 on: June 21, 2024, 05:23:57 PM »

^Looks like the same mil spec silver coated copper wire that a lot of us cable makers have used over the years. A bunch of manufacturers make it. One of the intended applications is aircraft comms.
yeah, this of some variety. rescued it from a shop clean out a few years ago.
if it aint broke, don't fix it

Offline SMsound

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 238
Re: Custom cables In Canada? Ted G already asked to quote
« Reply #11 on: June 25, 2024, 03:21:09 AM »
Someone here on TS told me a couple years ago that making cables is easy. I took the plunge and now I agree. Make your own.

Or ask Performance Audio. No affiliation, but they have done fantastic custom work for me and they are cheaper than anywhere else. Not sure how they do it. I am picky and they have skills.
waves -> bits

 

RSS | Mobile
Page created in 0.097 seconds with 35 queries.
© 2002-2024 Taperssection.com
Powered by SMF