Taperssection.com

Gear / Technical Help => Recording Gear => Topic started by: deadcreekphish on April 10, 2014, 10:30:36 AM

Title: Tascam > Computer
Post by: deadcreekphish on April 10, 2014, 10:30:36 AM

I have a tascam dr-2d that i have mics plugged into levels are fine but when i try to line out to computer it doesnt recognize my tascam dr-2d  im using window 8 mand adobe audition
Recently i gota new computer and was able to do this on vista!!!

Title: Re: Tascam > Computer
Post by: rodeen on April 10, 2014, 10:52:40 AM

I always connect my dr2d to my computer via USB.  It looks like aremovable drive at that point to the computer and you can copy your files off via Windows Explorer.  Another option is to remove the SD card and read the files off via a SD card reader.

Good luck!

Quote from: deadcreekphish on April 10, 2014, 10:30:36 AM

I have a tascam dr-2d that i have mics plugged into levels are fine but when i try to line out to computer it doesnt recognize my tascam dr-2d  im using window 8 mand adobe audition
Recently i gota new computer and was able to do this on vista!!!

Title: Re: Tascam > Computer
Post by: Gutbucket on April 11, 2014, 10:28:01 PM

Does this really need to be cross-posted in two sections of the forum?
http://taperssection.com/index.php?topic=167668.msg2088313#msg2088313

Notice that you get the same answers both places.

Welcome to the forum but please don't litter, it makes the Indian cry.
We like to keep it neat around here.

Title: Re: Tascam > Computer
Post by: DF81 on October 24, 2014, 05:25:26 AM

I'm not sure what language that was, but why is he using the 3.5mm line out of the DR2D into a PC?    ???
 
Hypothetically, you probably need to adjust the internal sound card settings on the PC, make sure you have the proper sample rate et al, if not buy an interface.