Become a Site Supporter and Never see Ads again!

Author Topic: questions about interchangeable AT mic caps  (Read 1899 times)

0 Members and 1 Guest are viewing this topic.

Offline itsmyforte

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 23
questions about interchangeable AT mic caps
« on: December 08, 2004, 02:56:43 PM »
i purchased a set of AT853 cardioid caps from alpha sound and lighting.  my question is which SP-CMC-XX mics have the same body so i can screw these on with? or any other configurations/company for that matter.  these will be used for stealthing with a battery box. 

thx,
J

Offline Sanjay

  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 5705
  • Gender: Male
  • www.drivebytruckers.com/tourdiary.html
Re: questions about interchangeable AT mic caps
« Reply #1 on: December 08, 2004, 04:41:08 PM »
well all sp mics come with caps already on them, usually cards, so it seems as though you don't need the caps you bought.
mics & cameras

Offline itsmyforte

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 23
Re: questions about interchangeable AT mic caps
« Reply #2 on: December 08, 2004, 05:29:49 PM »
i'm aware of this, however it appears that over half their damn inventory is depleted.  i was just wondering if there is a cheaper set of mics i can buy and just screw on my at853's.  or when they get their inventory back up which mics are able to be swapped out with different elements.  either way i have to buy a set and i had made my decision on the cmc-4, but no dice they out.

Offline bmr

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 119
  • Gender: Male
    • Pearl Jam Bit Torrents
Re: questions about interchangeable AT mic caps
« Reply #3 on: December 08, 2004, 05:46:03 PM »
i'm aware of this, however it appears that over half their damn inventory is depleted.  i was just wondering if there is a cheaper set of mics i can buy and just screw on my at853's.  or when they get their inventory back up which mics are able to be swapped out with different elements.  either way i have to buy a set and i had made my decision on the cmc-4, but no dice they out.

I believe the CMC-2 and 4s are the ones that your caps will work with. That said, you can buy an adapter for any of the higher numbered CMCs to where you'd go mic "bodies" > adapter > 853 caps.

urobouros

  • Guest
  • Trade Count: (0)
Re: questions about interchangeable AT mic caps
« Reply #4 on: December 08, 2004, 05:47:11 PM »
Check this out if you don't mind used:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=3767059389&ssPageName=STRK:MEWA:IT

I'm not affiliated with the auction, just a shameless ebay troller

Offline itsmyforte

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 23
Re: questions about interchangeable AT mic caps
« Reply #5 on: December 08, 2004, 08:51:50 PM »
thx guys, much appreciated.  i'll be watchin that auction like a vulture.  if i could give em, +T to all of you.

 

RSS | Mobile
Page created in 0.132 seconds with 32 queries.
© 2002-2024 Taperssection.com
Powered by SMF