Become a Site Supporter and Never see Ads again!

Author Topic: JB3 transfers  (Read 4699 times)

0 Members and 1 Guest are viewing this topic.

Offline treydaman

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 40
JB3 transfers
« on: March 12, 2006, 10:52:39 AM »
Im having troubles transfering my recordings from my jb3 to my PC. when I connect the sb1394 cable to my computer a "noad is connected" icon pops up in the corner but creative play center says the nomad is busy or not connected.I am a jb3 newb but have checked out the jb3 question thread and it didnt help.
Thanks for any help..

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: JB3 transfers
« Reply #1 on: March 12, 2006, 11:00:38 AM »
if youre on xp, d/l one of these two drivers and try again :)

and make sure you have firmware 1.40.06 for the best/most stability
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline svenkid

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 3564
  • Gender: Male
  • Take Time to Listen!
Re: JB3 transfers
« Reply #2 on: March 12, 2006, 02:35:40 PM »
thanks for the jb3 software disc Bean!

+T!
Seriously, the band makes the music. Tapers just point mics in the right direction and hit "record".

That's good to hear!  The last patcher I had complained about my AKGs, fluffed schoeps for about 15 minutes, stayed patched in, and farted on me all night long.
rig: Neuman u89s > Lunatec V3 > MT(24)/JB3(16)
http://db.etree.org/svenkid

Um, in my room, one seam is a little off and I stare at it constantly. It's, like, destroying me.

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline treydaman

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 40
Re: JB3 transfers
« Reply #4 on: March 13, 2006, 06:53:01 PM »
So I tried both drivers and they didnt help,How do I check to see what firmware I have?

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: JB3 transfers
« Reply #5 on: March 13, 2006, 07:01:35 PM »
So I tried both drivers and they didnt help,How do I check to see what firmware I have?

settings, then about
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline treydaman

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 40
Re: JB3 transfers
« Reply #6 on: March 13, 2006, 07:06:28 PM »
I have 1.40.06.... could this be a case of a bad 1394 cable?

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: JB3 transfers
« Reply #7 on: March 13, 2006, 07:07:35 PM »
I have 1.40.06.... could this be a case of a bad 1394 cable?

i dunno, try the usb and see if it works

maybe just retry the jb3 disc and see what happens, also try restarting the comp, that does wonders
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline treydaman

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 40
Re: JB3 transfers
« Reply #8 on: March 13, 2006, 07:09:54 PM »
Thanks for the help,Ill pick up a usb cable for it tomorrow....
Ill let ya know how ot works..

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: JB3 transfers
« Reply #9 on: March 13, 2006, 07:51:25 PM »
Thanks for the help,Ill pick up a usb cable for it tomorrow....
Ill let ya know how ot works..

pm me your addy, i have an extra lying around ive never used

usb sucks tho, so damn slow :P
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline terrapinj

  • Jonesin' for Tunes
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 6553
  • Gender: Male
Re: JB3 transfers
« Reply #10 on: March 13, 2006, 09:53:40 PM »
man getting the jb3 to work with some copies of XP is an absolute nightmare.

of 4 or 5 different computers i've (tried) to hook it up to, all running xp:
one took me an hour of reinstalling and uninstalling play center and the jb3 drivers to finally get it to work
one worked fine with the jb3 then a few months later would not recognize it and to date will still not recognize it
one refuses to work with any version of the drivers, creative playcenter or the sveta portable amp

dunno what the trick is, thank god my primary computer has no problems recognizing it (knock on wood)

good luck
JW mod AKG 460b (ck61/ck63 or mk46/ck1x/ck3x)>  EAA PSP-2 > 722

Segue Dogstar XLRs and Interconnects

ISO: (2) ck2x

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: JB3 transfers
« Reply #11 on: March 13, 2006, 10:16:46 PM »
man getting the jb3 to work with some copies of XP is an absolute nightmare.

of 4 or 5 different computers i've (tried) to hook it up to, all running xp:
one took me an hour of reinstalling and uninstalling play center and the jb3 drivers to finally get it to work
one worked fine with the jb3 then a few months later would not recognize it and to date will still not recognize it
one refuses to work with any version of the drivers, creative playcenter or the sveta portable amp

dunno what the trick is, thank god my primary computer has no problems recognizing it (knock on wood)

good luck

after installing one of those drivers, mine recognizes almost 100% of the time ;D
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline RedRocketSr

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 95
  • I'd rather be lucky than good.
Re: JB3 transfers
« Reply #12 on: March 14, 2006, 02:19:27 AM »
mine takes me a few trys (not a lot of clock time) before actually showing up. the creative software says that it's there, but the jb3 doesn't show in the creative window. i think it's a matter of getting it done in the correct order.
SP-CMC2 --> SP-SPSB1 --> JB3

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: JB3 transfers
« Reply #13 on: March 14, 2006, 03:43:01 PM »
my workflow is different

1. firewire is always plugged into comp
2. keep jb3 power off then plug in 1394 cable
3. once 1394 is plugged in, turn on jb3
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline terrapinj

  • Jonesin' for Tunes
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 6553
  • Gender: Male
Re: JB3 transfers
« Reply #14 on: March 14, 2006, 04:16:41 PM »
my workflow is different

1. firewire is always plugged into comp
2. keep jb3 power off then plug in 1394 cable
3. once 1394 is plugged in, turn on jb3

same here, except as soon as i plug the firewire into the JB3 it powers on automatically

i think the workflow of how you go about installing the driver/software is what is key
JW mod AKG 460b (ck61/ck63 or mk46/ck1x/ck3x)>  EAA PSP-2 > 722

Segue Dogstar XLRs and Interconnects

ISO: (2) ck2x

Offline F.O.Bean

  • Team Schoeps Tapir that
  • Trade Count: (126)
  • Needs to get out more...
  • *****
  • Posts: 40690
  • Gender: Male
  • Taperus Maximus
    • MediaFire Recordings
Re: JB3 transfers
« Reply #15 on: March 18, 2006, 01:56:04 AM »
now I'm really confused ??? So there goes that theory... Did this ever get resolved?

im wondering the same thing, either way tho, im sending him my extra jb3/usb cable to see if that helps, cause when i try to upgrade firmware once i reformat the jb3, it ONLY lets me use the usb cable, somtimes 1394 is fine, VERY picky at times can the jb3 be :)
Schoeps MK 4V & MK 41V ->
Schoeps 250|0 KCY's (x2) ->
Naiant +60v|Low Noise PFA's (x2) ->
DarkTrain Right Angle Stubby XLR's (x3) ->
Sound Devices MixPre-6 & MixPre-3

http://www.archive.org/bookmarks/diskobean
http://www.archive.org/bookmarks/Bean420
http://bt.etree.org/mytorrents.php
http://www.mediafire.com/folder/j9eu80jpuaubz/Recordings

Offline rowjimmy

  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 2175
  • Gender: Male
  • rowjimmy.com
    • Row Knows
Re: JB3 transfers
« Reply #16 on: March 18, 2006, 09:18:46 AM »
I use this: http://www.redchairsoftware.com/notmad/index.php
You still need the creative drivers but this app smokes the other creative software.
Bandcamp | Host of The Brokedown Podcast
mic > wires > recorder

Offline treydaman

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 40
Re: JB3 transfers
« Reply #17 on: March 25, 2006, 04:24:22 PM »
Still not resolved,Im gonna try the notmad driver thing above..

 

RSS | Mobile
Page created in 0.128 seconds with 42 queries.
© 2002-2024 Taperssection.com
Powered by SMF