Become a Site Supporter and Never see Ads again!

Author Topic: Marantz PMD 671 in the field Part 3...  (Read 91706 times)

0 Members and 1 Guest are viewing this topic.

spreadheadtom

  • Guest
  • Trade Count: (0)

Offline sygdwm

  • unknown sleath taper
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8747
  • Gender: Male
Re: Marantz PMD 671 in the field Part 3...
« Reply #121 on: June 12, 2006, 12:42:57 PM »
ALWAYS RUN THE PAD ON THE 671!!! trust me. if you cant good levels w/ the pad engaged, you are not close enough. if you are getting too hot levels run the pad on the mics as well. i have already learned this lesson several times over w/ 140's, 463's, & TL's.

ps - doug says so.
mics: (4)akg c460b(a60,mk46,ck1x,ck1,ck2,ck3,ck61,ck63)
pres: oade m148/edirol wmod ua5
recorders: marantz stock671/oade acm671/fostex busman vintage fr2le

(P.S.: On a threaded discussion board like this one, there's no need to repeat someone's post when you reply to them; everyone can see all the messages in the thread.)

Offline spcyrfc

  • Trade Count: (8)
  • Taperssection Member
  • ***
  • Posts: 941
  • Gender: Male
  • Live from River City
    • BordersCrossing.net
Re: Marantz PMD 671 in the field Part 3...
« Reply #122 on: June 12, 2006, 01:19:47 PM »
ALWAYS RUN THE PAD ON THE 671!!! trust me. if you cant good levels w/ the pad engaged, you are not close enough. if you are getting too hot levels run the pad on the mics as well. i have already learned this lesson several times over w/ 140's, 463's, & TL's.

ps - doug says so.

does this go for both stock and modded units?
also what kind of lesson did you learn - what happened to the recording when you did not run the pad as opposed to when you did?
mkh8040>aerco mp-2>pcmd-50
PFS: AKG 414xls

Record Local

www.borderscrossing.net

Offline sygdwm

  • unknown sleath taper
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8747
  • Gender: Male
Re: Marantz PMD 671 in the field Part 3...
« Reply #123 on: June 12, 2006, 01:22:54 PM »

Quote
does this go for both stock and modded units?

yes, both.

Quote
also what kind of lesson did you learn - what happened to the recording when you did not run the pad as opposed to when you did?

the waveforms are sticks of butter. sounds like shit.
mics: (4)akg c460b(a60,mk46,ck1x,ck1,ck2,ck3,ck61,ck63)
pres: oade m148/edirol wmod ua5
recorders: marantz stock671/oade acm671/fostex busman vintage fr2le

(P.S.: On a threaded discussion board like this one, there's no need to repeat someone's post when you reply to them; everyone can see all the messages in the thread.)

Offline TenoRichards

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 169
  • Gender: Male
  • Resident Taper/Audiophile Wannabe
    • Tenor
Re: Marantz PMD 671 in the field Part 3...
« Reply #124 on: June 13, 2006, 12:29:59 AM »
ALWAYS RUN THE PAD ON THE 671!!! trust me. if you cant good levels w/ the pad engaged, you are not close enough. if you are getting too hot levels run the pad on the mics as well. i have already learned this lesson several times over w/ 140's, 463's, & TL's.

ps - doug says so.
This really worries me, doing classical. I am sending in my unit today to have it modded, and it's really gonna bum me out if I spend that dough, and then levels aren't hot enuf in this unit with the acm.

Here's hoping, and if not, expect to find it on Yard Sale.
dpa 4060's>BBox>acm modded pmd671 or Edirol r-09
www.tenorrichards.com

Offline macdaddy

  • Trade Count: (10)
  • Needs to get out more...
  • *****
  • Posts: 7657
Re: Marantz PMD 671 in the field Part 3...
« Reply #125 on: June 13, 2006, 12:36:23 AM »
ALWAYS RUN THE PAD ON THE 671!!! trust me. if you cant good levels w/ the pad engaged, you are not close enough. if you are getting too hot levels run the pad on the mics as well. i have already learned this lesson several times over w/ 140's, 463's, & TL's.

ps - doug says so.

what would you do in the situation in boldface..?
-macdaddy ++

akg c422 > s42 > lunatec v2 > ad2k+ > roland r-44

Offline Genghis Cougar Mellen Khan

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 2238
  • Gender: Male
  • Tin Can > Wax String > Dictaphone
Re: Marantz PMD 671 in the field Part 3...
« Reply #126 on: June 13, 2006, 12:36:27 AM »
has anyone tried an 8gb card yet?

Go back to page 4 of this thread, there's a little discussion of the 8gb cards there.
Maybe a couple of small scratches, but thats because these mics are chick magnets.
Girls always up on Andy tryin to grab these mics, the scratches are from their wedding rings.

CMC641 / DPA4022 / DPA4062>mod MPS6030
V3 / PMD671 / field ready DV-RA1000 / Oade W-mod PMD661 / PCM-M10

Offline RDunn

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 438
  • Gender: Male
Re: Marantz PMD 671 in the field Part 3...
« Reply #127 on: June 13, 2006, 04:02:38 AM »

I'm curious if anyone that owns an 8 gigger has tried formatting in a computer and indeed verified that the external format allows the 671 to recognize the card as having 8 gigs available.
[/quote]

I tried formatting an 8 gig card on my computer and when I put the card in my 671 it still shows as having 4 gigs.  I did just use the standard card format with Windoze XP though and am not sure if another formatting utility would work differently.
Schoeps MK4 > KC5 > CMC6 > Sound Devices 744T

Offline sygdwm

  • unknown sleath taper
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8747
  • Gender: Male
Re: Marantz PMD 671 in the field Part 3...
« Reply #128 on: June 13, 2006, 12:52:09 PM »
ALWAYS RUN THE PAD ON THE 671!!! trust me. if you cant good levels w/ the pad engaged, you are not close enough. if you are getting too hot levels run the pad on the mics as well. i have already learned this lesson several times over w/ 140's, 463's, & TL's.

ps - doug says so.

what would you do in the situation in boldface..?

get closer. ;)
seriously, it happened to me twice. i just cranked the 671 wide open. the levels were low, but it sounded fine. i could have added in post, but didnt seem necessary.

teno: i have NOT recorded anything unamplified or classical to help you, sorry. its worth a shot and it will sell if it comes to that.
mics: (4)akg c460b(a60,mk46,ck1x,ck1,ck2,ck3,ck61,ck63)
pres: oade m148/edirol wmod ua5
recorders: marantz stock671/oade acm671/fostex busman vintage fr2le

(P.S.: On a threaded discussion board like this one, there's no need to repeat someone's post when you reply to them; everyone can see all the messages in the thread.)

Offline Genghis Cougar Mellen Khan

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 2238
  • Gender: Male
  • Tin Can > Wax String > Dictaphone
Re: Marantz PMD 671 in the field Part 3...
« Reply #129 on: June 14, 2006, 09:51:02 PM »
hey ghengis (or anyone else).
have you run dpa 402x > acm671 yet?  I'm curious what kind of levels one would get if using these less sensitive mics, coupled with the -20 pad.

I only ran my 4022's into a BCM671, the ACM is worked over a bit more, I don't think the gain is comparable.  I had no issues getting strong levels, but... it was a BCM and very loud sources.  Quietest being Mule at a festival.
Maybe a couple of small scratches, but thats because these mics are chick magnets.
Girls always up on Andy tryin to grab these mics, the scratches are from their wedding rings.

CMC641 / DPA4022 / DPA4062>mod MPS6030
V3 / PMD671 / field ready DV-RA1000 / Oade W-mod PMD661 / PCM-M10

Offline Genghis Cougar Mellen Khan

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 2238
  • Gender: Male
  • Tin Can > Wax String > Dictaphone
Re: Marantz PMD 671 in the field Part 3...
« Reply #130 on: June 15, 2006, 06:40:57 PM »
I just got this card in the mail today:



I set the recorder to 24/96 and I'm recording through the line in to see if it'll hang. 

2hrs @ 24/96 until the card was full, looks like this card should work! 20 minutes and it's still going, it said 02:00:07 available.  I'll do the speed test and compare the test/record time (capacity) against my Kingston 45X 4GB that's worked flawlessly for me so far.
4GB for under $100 shipped is a pretty good deal.  :coolguy:

Card check: Read/Write 6052
« Last Edit: June 15, 2006, 08:51:03 PM by Genghis Cougar Mellen Khan »
Maybe a couple of small scratches, but thats because these mics are chick magnets.
Girls always up on Andy tryin to grab these mics, the scratches are from their wedding rings.

CMC641 / DPA4022 / DPA4062>mod MPS6030
V3 / PMD671 / field ready DV-RA1000 / Oade W-mod PMD661 / PCM-M10

Offline sygdwm

  • unknown sleath taper
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8747
  • Gender: Male
Re: Marantz PMD 671 in the field Part 3...
« Reply #131 on: June 16, 2006, 12:57:46 AM »
how did that compare to the kingston (speed-wise)? just curious.
mics: (4)akg c460b(a60,mk46,ck1x,ck1,ck2,ck3,ck61,ck63)
pres: oade m148/edirol wmod ua5
recorders: marantz stock671/oade acm671/fostex busman vintage fr2le

(P.S.: On a threaded discussion board like this one, there's no need to repeat someone's post when you reply to them; everyone can see all the messages in the thread.)

Offline Genghis Cougar Mellen Khan

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 2238
  • Gender: Male
  • Tin Can > Wax String > Dictaphone
Re: Marantz PMD 671 in the field Part 3...
« Reply #132 on: June 16, 2006, 07:30:14 AM »
how did that compare to the kingston (speed-wise)? just curious.

PQI 4GB Read/Write 6052/6052

Kingston 45X 4GB Read/Write 7377/7377 (this car isn't empty, maybe half full, I'm not sure if it would have an effect on write speeds)

Kingston 50X 2GB Read/Write 8128/8128
Maybe a couple of small scratches, but thats because these mics are chick magnets.
Girls always up on Andy tryin to grab these mics, the scratches are from their wedding rings.

CMC641 / DPA4022 / DPA4062>mod MPS6030
V3 / PMD671 / field ready DV-RA1000 / Oade W-mod PMD661 / PCM-M10

Offline sygdwm

  • unknown sleath taper
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8747
  • Gender: Male
Re: Marantz PMD 671 in the field Part 3...
« Reply #133 on: June 16, 2006, 11:18:37 AM »
thanks.
mics: (4)akg c460b(a60,mk46,ck1x,ck1,ck2,ck3,ck61,ck63)
pres: oade m148/edirol wmod ua5
recorders: marantz stock671/oade acm671/fostex busman vintage fr2le

(P.S.: On a threaded discussion board like this one, there's no need to repeat someone's post when you reply to them; everyone can see all the messages in the thread.)

spreadheadtom

  • Guest
  • Trade Count: (0)
Re: Marantz PMD 671 in the field Part 3...
« Reply #134 on: June 19, 2006, 10:45:57 AM »
I think I may have screwed up a CF card.  It will not reformat in the 671.  I get an error message "format on PC".  I tried formatting on my computer and it would still not work.  suggestions?

 

RSS | Mobile
Page created in 0.065 seconds with 43 queries.
© 2002-2024 Taperssection.com
Powered by SMF