Become a Site Supporter and Never see Ads again!

Author Topic: Marantz PMD 671 in the field Part 3...  (Read 91996 times)

0 Members and 1 Guest are viewing this topic.

Offline Dutchman1101

  • Trade Count: (13)
  • Needs to get out more...
  • *****
  • Posts: 2856
  • Gender: Male
Re: Marantz PMD 671 in the field Part 3...
« Reply #300 on: January 07, 2007, 08:25:25 PM »
Anyone know if the Oade's are still selling stock 671's? I'll try calling them but it's been so busy at work lately I don't think I'll get a chance to in the next few days.

Offline sygdwm

  • unknown sleath taper
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8747
  • Gender: Male
Re: Marantz PMD 671 in the field Part 3...
« Reply #301 on: January 07, 2007, 09:07:44 PM »
Anyone know if the Oade's are still selling stock 671's? I'll try calling them but it's been so busy at work lately I don't think I'll get a chance to in the next few days.

shoot doug an email.
mics: (4)akg c460b(a60,mk46,ck1x,ck1,ck2,ck3,ck61,ck63)
pres: oade m148/edirol wmod ua5
recorders: marantz stock671/oade acm671/fostex busman vintage fr2le

(P.S.: On a threaded discussion board like this one, there's no need to repeat someone's post when you reply to them; everyone can see all the messages in the thread.)

Offline Dutchman1101

  • Trade Count: (13)
  • Needs to get out more...
  • *****
  • Posts: 2856
  • Gender: Male
Re: Marantz PMD 671 in the field Part 3...
« Reply #302 on: January 07, 2007, 09:14:12 PM »
Anyone know if the Oade's are still selling stock 671's? I'll try calling them but it's been so busy at work lately I don't think I'll get a chance to in the next few days.

shoot doug an email.

Thanks! I totally did'nt think of that for some reason.

Offline Nick's Picks

  • Trade Count: (33)
  • Needs to get out more...
  • *****
  • Posts: 10260
  • Gender: Male
  • I thought I heard.......
Re: Marantz PMD 671 in the field Part 3...
« Reply #303 on: January 08, 2007, 06:53:46 AM »
He has not responded to my email the last two weeks....fwiw.
Dutch..you just need to buy mine and be done w/it.
:)
batteries...CF card..., the "oade options"....can't go wrong!

Offline sam

  • Getting out as much as I can
  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 206
  • Gender: Male
Re: Marantz PMD 671 in the field Part 3...
« Reply #304 on: January 08, 2007, 09:42:17 AM »
He has not responded to my email the last two weeks....fwiw.
Dutch..you just need to buy mine and be done w/it.
:)
batteries...CF card..., the "oade options"....can't go wrong!


Thats funny, he responded to my email on friday. He was closed 12/23-1/3.
« Last Edit: January 08, 2007, 03:26:56 PM by sam »
AKG480/61/63->Audio Magic X-Stream->Marantz ACM671

Offline Dutchman1101

  • Trade Count: (13)
  • Needs to get out more...
  • *****
  • Posts: 2856
  • Gender: Male
Re: Marantz PMD 671 in the field Part 3...
« Reply #305 on: January 08, 2007, 02:29:04 PM »
Got a response back. They do sell stock units. I think I'm going to that route. Sorry again Nick but I think I should just go new.

Harrison

spreadheadtom

  • Guest
  • Trade Count: (0)
Re: Marantz PMD 671 in the field Part 3...
« Reply #306 on: January 11, 2007, 04:53:14 PM »
ANYONE RUNNING v2 > 671?

I'm gonna try ck61 > JKLabs > V2 (rca out) > ACM 671 tonight for Oteil and was needing some opinions on how hot to run the V2

Offline sygdwm

  • unknown sleath taper
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8747
  • Gender: Male
Re: Marantz PMD 671 in the field Part 3...
« Reply #307 on: January 11, 2007, 05:22:04 PM »
i *think* ghengis khan cougar mellancamp did/does but i havent seem him around in a while.
mics: (4)akg c460b(a60,mk46,ck1x,ck1,ck2,ck3,ck61,ck63)
pres: oade m148/edirol wmod ua5
recorders: marantz stock671/oade acm671/fostex busman vintage fr2le

(P.S.: On a threaded discussion board like this one, there's no need to repeat someone's post when you reply to them; everyone can see all the messages in the thread.)

Offline sam

  • Getting out as much as I can
  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 206
  • Gender: Male
Re: Marantz PMD 671 in the field Part 3...
« Reply #308 on: January 11, 2007, 07:42:09 PM »
ANYONE RUNNING v2 > 671?

I'm gonna try ck61 > JKLabs > V2 (rca out) > ACM 671 tonight for Oteil and was needing some opinions on how hot to run the V2

I was running V2 > Stock 671 line in from the rca outs.  I ran the V2 just the same as I did with the V2>mini-me. Just to the point where the over lights on the V2 start to flicker, During loud passages. Would start at about 30 on the dial with 603A/200 in clubs. Nutter had some documentation up a a while ago but don't see it now.

I just pulled my manual out, "red indicates a peak level which is 10db before clipping.." The link is:

http://www.gracedesign.com/support/v2_manual_a.pdf

My ACM arrives tommorow.
AKG480/61/63->Audio Magic X-Stream->Marantz ACM671

Offline Dutchman1101

  • Trade Count: (13)
  • Needs to get out more...
  • *****
  • Posts: 2856
  • Gender: Male
Re: Marantz PMD 671 in the field Part 3...
« Reply #309 on: January 22, 2007, 04:44:07 PM »
Quick question... If I'm using NIMH rechargable AA's do I select NIMH or Alkaline? I assume the NIMH is for the battery Marantz sells but I just wanted to be sure. the manual does not say anything about this.

Offline sygdwm

  • unknown sleath taper
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8747
  • Gender: Male
Re: Marantz PMD 671 in the field Part 3...
« Reply #310 on: January 22, 2007, 07:37:28 PM »
i use the nimh setting. fwiw, the battery meter sucks. its stays full for a couple hours, then goes to half for a short time, then it blinks and your are dead within a couple minutes. too bad walmart batts dont work well.
mics: (4)akg c460b(a60,mk46,ck1x,ck1,ck2,ck3,ck61,ck63)
pres: oade m148/edirol wmod ua5
recorders: marantz stock671/oade acm671/fostex busman vintage fr2le

(P.S.: On a threaded discussion board like this one, there's no need to repeat someone's post when you reply to them; everyone can see all the messages in the thread.)

Offline Dutchman1101

  • Trade Count: (13)
  • Needs to get out more...
  • *****
  • Posts: 2856
  • Gender: Male
Re: Marantz PMD 671 in the field Part 3...
« Reply #311 on: January 22, 2007, 08:19:03 PM »
i use the nimh setting. fwiw, the battery meter sucks. its stays full for a couple hours, then goes to half for a short time, then it blinks and your are dead within a couple minutes. too bad walmart batts dont work well.

Thanks. I had it die on me at Zero this weekend. I was on the Alkaline setting. I tried the NIMH setting and it did the same thing. I then tried it again on the Alkaline setting and it went the full 4 hours of the card. I wonder what the deal is? I heard about the battery holster can come loose or something but I did a bunch of tests to see it that was the case and that does not seem to be the probelm.

FWIW a buddy of mine uses a DVD battery with no problems at all. I just bought one too and I'm pretty sure it will work. I'm pretty sure that the 671 can accept a pretty broad range of voltages.

Offline sygdwm

  • unknown sleath taper
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8747
  • Gender: Male
Re: Marantz PMD 671 in the field Part 3...
« Reply #312 on: January 22, 2007, 10:43:13 PM »
the dvd batts do work, but as they die they dont produce as much voltage. you cant use the batts all the way, if that makes sense. i have never had a sled malfunction and i own 2 units. just make sure you use well charged AA's and you should be fine. i use a dvd battery as a backup just in case the internals start to die.
mics: (4)akg c460b(a60,mk46,ck1x,ck1,ck2,ck3,ck61,ck63)
pres: oade m148/edirol wmod ua5
recorders: marantz stock671/oade acm671/fostex busman vintage fr2le

(P.S.: On a threaded discussion board like this one, there's no need to repeat someone's post when you reply to them; everyone can see all the messages in the thread.)

Offline Dutchman1101

  • Trade Count: (13)
  • Needs to get out more...
  • *****
  • Posts: 2856
  • Gender: Male
Re: Marantz PMD 671 in the field Part 3...
« Reply #313 on: January 22, 2007, 11:09:14 PM »
the dvd batts do work, but as they die they dont produce as much voltage. you cant use the batts all the way, if that makes sense. i have never had a sled malfunction and i own 2 units. just make sure you use well charged AA's and you should be fine. i use a dvd battery as a backup just in case the internals start to die.

The sled is def my problem. I gently took off the battery cover just now and the thing died. I have the worst luck :( I guess I'll see what Marantz says. I know a few epople had similar issues but I figured they had this fixed by now >:(

Offline sygdwm

  • unknown sleath taper
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8747
  • Gender: Male
Re: Marantz PMD 671 in the field Part 3...
« Reply #314 on: January 22, 2007, 11:12:57 PM »
i think the remedy to said problems was to shimmy something in between the sled and the side of cage. never had to personally though.
mics: (4)akg c460b(a60,mk46,ck1x,ck1,ck2,ck3,ck61,ck63)
pres: oade m148/edirol wmod ua5
recorders: marantz stock671/oade acm671/fostex busman vintage fr2le

(P.S.: On a threaded discussion board like this one, there's no need to repeat someone's post when you reply to them; everyone can see all the messages in the thread.)

 

RSS | Mobile
Page created in 0.1 seconds with 39 queries.
© 2002-2024 Taperssection.com
Powered by SMF