Become a Site Supporter and Never see Ads again!

Author Topic: Marantz PMD 671 in the field Part 3...  (Read 92027 times)

0 Members and 1 Guest are viewing this topic.

Offline Kevin Straker

  • The Shogun of Easley
  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 2310
  • Gender: Male
Re: Marantz PMD 671 in the field Part 3...
« Reply #180 on: July 12, 2006, 03:15:05 PM »
Tonight I'm going to run mk4>psp3>671. I'd like to run xlr out of the psp3 and in to the xlr on the 671. I'm wondering if this will work? Can you run line in on the xlr? If so, would I switch it to mic in or line in? Any help or alternate setups are apreciated.
People on ludes should not drive...
J. Spicoli

mk4,mk21>kc5>cmc6>V3>SD722

Offline sygdwm

  • unknown sleath taper
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8747
  • Gender: Male
Re: Marantz PMD 671 in the field Part 3...
« Reply #181 on: July 12, 2006, 03:34:18 PM »
ideally, you would run line in via rca's.
mics: (4)akg c460b(a60,mk46,ck1x,ck1,ck2,ck3,ck61,ck63)
pres: oade m148/edirol wmod ua5
recorders: marantz stock671/oade acm671/fostex busman vintage fr2le

(P.S.: On a threaded discussion board like this one, there's no need to repeat someone's post when you reply to them; everyone can see all the messages in the thread.)

Offline Chuck

  • Trade Count: (42)
  • Needs to get out more...
  • *****
  • Posts: 10811
  • Gender: Male
  • time between the notes...
    • My recordings on the LMA
Re: Marantz PMD 671 in the field Part 3...
« Reply #182 on: July 12, 2006, 07:05:47 PM »
ideally, you would run line in via rca's.

I agree. Definately run the pad if you decide to go in through the XLR's though...
Reality is merely an illusion, albeit a very persistent one.

Microphones: AKG C 480 B comb-ULS/ CK 61/ CK 63, Sennheiser MKE 2 elements,  Audix M1290-o, Micro capsule active cables w/ Naiant PFA's, Naiant MSH-1O, Naiant AKG Active cables, Church CA-11 (cardioid), (1) Nady SCM-1000 (mod)
Pre-amps: Naiant littlebox, Naiant littlekit v2.0, BM2p+ Edirol UA-5, Church STC-9000
Recorders: Sound Devices MixPre-6, iRiver iHP-120 (Rockboxed & RTC mod)

Recordings on the LMA: http://www.archive.org/bookmarks/ChuckM
Recording website & blog: http://www.timebetweenthenotes.com

Offline Kevin Straker

  • The Shogun of Easley
  • Trade Count: (4)
  • Needs to get out more...
  • *****
  • Posts: 2310
  • Gender: Male
Re: Marantz PMD 671 in the field Part 3...
« Reply #183 on: July 13, 2006, 08:02:23 AM »
ideally, you would run line in via rca's.

I agree. Definately run the pad if you decide to go in through the XLR's though...


wound up running 1/8th to rca. It worked out fine. Thanks.
People on ludes should not drive...
J. Spicoli

mk4,mk21>kc5>cmc6>V3>SD722

Offline willndmb

  • Trade Count: (17)
  • Needs to get out more...
  • *****
  • Posts: 6792
  • Gender: Male
Re: Marantz PMD 671 in the field Part 3...
« Reply #184 on: July 14, 2006, 10:32:58 PM »
hi guys
i am reserching a 671 for myself
one question i had which i didn't see posted anywhere....
if you get a oade mod 671 it voids the warranty
if you need to send it in for firmware how is that effected if at all?
thanks
Mics - AKG ck61/ck63 (c480b & Naiant actives), SP-BMC-2
XLR Cables - Silver Path w/Darktrain stubbies
Interconnect Cables - Dogstar (XLR), Darktrain (RCA > 1/8) (1/8 > 1/8), and Kind Kables (1/8f > 1/4)
Preamps - Naiant Littlebox & Tinybox
Recorders - PCM-M10 & DR-60D

Offline sygdwm

  • unknown sleath taper
  • Trade Count: (1)
  • Needs to get out more...
  • *****
  • Posts: 8747
  • Gender: Male
Re: Marantz PMD 671 in the field Part 3...
« Reply #185 on: July 15, 2006, 04:11:21 PM »
i have two 671's ( 1 stock/ 1 oade) neither have been sent in for firmware updates and both record flawlessly. i dont think there is an issue.
YMMV.
mics: (4)akg c460b(a60,mk46,ck1x,ck1,ck2,ck3,ck61,ck63)
pres: oade m148/edirol wmod ua5
recorders: marantz stock671/oade acm671/fostex busman vintage fr2le

(P.S.: On a threaded discussion board like this one, there's no need to repeat someone's post when you reply to them; everyone can see all the messages in the thread.)

Offline tscales

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 209
  • Gender: Male
    • .:www.timscales.net:.
Re: Marantz PMD 671 in the field Part 3...
« Reply #186 on: July 15, 2006, 04:23:37 PM »
you have TWO???

wow.
Life's a garden.  Dig it.

AKG 393s > UA-5 (w-mod +) > D8 / Fujitsu T70G

Live Recordings..  http://www.archive.org/bookmarks/tscales


Offline leehookem

  • Trade Count: (3)
  • Needs to get out more...
  • *****
  • Posts: 4439
  • Gender: Male
    • Texas Tapers
Re: Marantz PMD 671 in the field Part 3...
« Reply #187 on: July 18, 2006, 12:43:35 AM »
you have to buy directly from Marantz.
www.texastapers.org


AKG c480b ck61/ck63 > Tascam DR-70D
Oade ACM Marantz PMD-671
AKG ck61/63 > NBob Actives > Naiant PFA > Tascam DR-70D
Oade ACM Marantz PMD-671
Audiophile 2496 > Mytek Stereo96 DAC > Sony MDR-7506
Dual 1229 > Marantz 2270 > Kimber Kables > Cerwin Vega VS120

Canon Rebel XSi, EF 50 mm f/1.8, EF-S 18-55mm f/3.5-5.6 IS

Offline Chuck

  • Trade Count: (42)
  • Needs to get out more...
  • *****
  • Posts: 10811
  • Gender: Male
  • time between the notes...
    • My recordings on the LMA
Re: Marantz PMD 671 in the field Part 3...
« Reply #188 on: July 18, 2006, 11:22:19 AM »
Or buy one from Radio Shack and modify it slightly  ;D
Reality is merely an illusion, albeit a very persistent one.

Microphones: AKG C 480 B comb-ULS/ CK 61/ CK 63, Sennheiser MKE 2 elements,  Audix M1290-o, Micro capsule active cables w/ Naiant PFA's, Naiant MSH-1O, Naiant AKG Active cables, Church CA-11 (cardioid), (1) Nady SCM-1000 (mod)
Pre-amps: Naiant littlebox, Naiant littlekit v2.0, BM2p+ Edirol UA-5, Church STC-9000
Recorders: Sound Devices MixPre-6, iRiver iHP-120 (Rockboxed & RTC mod)

Recordings on the LMA: http://www.archive.org/bookmarks/ChuckM
Recording website & blog: http://www.timebetweenthenotes.com

spreadheadtom

  • Guest
  • Trade Count: (0)
Re: Marantz PMD 671 in the field Part 3...
« Reply #189 on: July 19, 2006, 03:43:16 PM »
anyone running schempz in front of the ACM 671?

spreadheadtom

  • Guest
  • Trade Count: (0)
Re: Marantz PMD 671 in the field Part 3...
« Reply #190 on: July 20, 2006, 10:40:09 AM »
anyone running schempz in front of the ACM 671?

noone?

I'm gonna give the mk21's a run up front for panic......we'll see how that goes.

Offline Dutchman1101

  • Trade Count: (13)
  • Needs to get out more...
  • *****
  • Posts: 2856
  • Gender: Male
Re: Marantz PMD 671 in the field Part 3...
« Reply #191 on: July 27, 2006, 12:09:03 AM »
Quick question guys. Do you recommend getting any upgrades to the 671 if I'm going to be doing m148>671? Looking on the Oade's website it looks like the mods only effect the mic pre's and what not. I may be over looking something.

Offline Genghis Cougar Mellen Khan

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 2238
  • Gender: Male
  • Tin Can > Wax String > Dictaphone
Re: Marantz PMD 671 in the field Part 3...
« Reply #192 on: July 27, 2006, 01:57:57 AM »
Quick question guys. Do you recommend getting any upgrades to the 671 if I'm going to be doing m148>671? Looking on the Oade's website it looks like the mods only effect the mic pre's and what not. I may be over looking something.

I believe the self-noise of the unit is improved slightly, but not much else.
Maybe a couple of small scratches, but thats because these mics are chick magnets.
Girls always up on Andy tryin to grab these mics, the scratches are from their wedding rings.

CMC641 / DPA4022 / DPA4062>mod MPS6030
V3 / PMD671 / field ready DV-RA1000 / Oade W-mod PMD661 / PCM-M10

Offline Chuck

  • Trade Count: (42)
  • Needs to get out more...
  • *****
  • Posts: 10811
  • Gender: Male
  • time between the notes...
    • My recordings on the LMA
Re: Marantz PMD 671 in the field Part 3...
« Reply #193 on: July 27, 2006, 10:09:29 AM »
Quick question guys. Do you recommend getting any upgrades to the 671 if I'm going to be doing m148>671? Looking on the Oade's website it looks like the mods only effect the mic pre's and what not. I may be over looking something.

Harrison, are you going to get a 671?
Reality is merely an illusion, albeit a very persistent one.

Microphones: AKG C 480 B comb-ULS/ CK 61/ CK 63, Sennheiser MKE 2 elements,  Audix M1290-o, Micro capsule active cables w/ Naiant PFA's, Naiant MSH-1O, Naiant AKG Active cables, Church CA-11 (cardioid), (1) Nady SCM-1000 (mod)
Pre-amps: Naiant littlebox, Naiant littlekit v2.0, BM2p+ Edirol UA-5, Church STC-9000
Recorders: Sound Devices MixPre-6, iRiver iHP-120 (Rockboxed & RTC mod)

Recordings on the LMA: http://www.archive.org/bookmarks/ChuckM
Recording website & blog: http://www.timebetweenthenotes.com

Offline Nick's Picks

  • Trade Count: (33)
  • Needs to get out more...
  • *****
  • Posts: 10260
  • Gender: Male
  • I thought I heard.......
Re: Marantz PMD 671 in the field Part 3...
« Reply #194 on: July 27, 2006, 10:13:38 AM »
Mmmm.....
148>671

 

RSS | Mobile
Page created in 0.132 seconds with 44 queries.
© 2002-2024 Taperssection.com
Powered by SMF