Become a Site Supporter and Never see Ads again!

Author Topic: JB3 not being recognized by Playcenter  (Read 1360 times)

0 Members and 1 Guest are viewing this topic.

Offline jasonw

  • Trade Count: (6)
  • Taperssection Member
  • ***
  • Posts: 386
  • Gender: Male
  • Formerly "jb3newbie"
JB3 not being recognized by Playcenter
« on: October 26, 2006, 06:38:15 PM »
Ok I just got creative playcenter from a very kind boardmember here b/c I did not have it and have tried using Notmad & Nomad Explorer with no luck.  I have uninstalled and installed drivers, software, & etc a few times with no results.  Any idea?  When I plug the JB3 into the computer a little window pops up in the lower right hand part of the toolbar (where the time is displayed) and says "NOMAD is connected" so whats up>
Mics: Franken Naks / Cp2
Pre: BM2p+ UA-5
Recorders: Iriver

Offline pfife

  • Emperor of Ticketucky
  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 12354
  • I love/hate tickets.
Re: JB3 not being recognized by Playcenter
« Reply #1 on: October 26, 2006, 06:48:40 PM »
usb or firewire?
Tickets are dead to me.  Except the ones I have, don't have, and lost.  Not to mention the ones you have, don't have, and lost.   And the ones that other dude has, doesn't have, and lost.  Let me know if you need some tickets, I'm happy to oblige. 

Tickets >>>>>>>> Oxygen

Offline svenkid

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 3564
  • Gender: Male
  • Take Time to Listen!
Re: JB3 not being recognized by Playcenter
« Reply #2 on: October 26, 2006, 08:35:24 PM »
Ive had this problem recently with mine too.
lessons Ive learned
1. Always use the wall charger to power the jb3 when connecting to the computer
2. If you can use the mac version of jb3 transfer program, for me it works better for my JB3, my pc doesnt accept my jb3 at all anymore, wall charger or battery pack.
Seriously, the band makes the music. Tapers just point mics in the right direction and hit "record".

That's good to hear!  The last patcher I had complained about my AKGs, fluffed schoeps for about 15 minutes, stayed patched in, and farted on me all night long.
rig: Neuman u89s > Lunatec V3 > MT(24)/JB3(16)
http://db.etree.org/svenkid

Um, in my room, one seam is a little off and I stare at it constantly. It's, like, destroying me.

Offline jasonw

  • Trade Count: (6)
  • Taperssection Member
  • ***
  • Posts: 386
  • Gender: Male
  • Formerly "jb3newbie"
Re: JB3 not being recognized by Playcenter
« Reply #3 on: October 26, 2006, 09:10:03 PM »
Actually I got it to work.  Reinstalled the driver (again) and it worked like a charm.... thanks guys.
Mics: Franken Naks / Cp2
Pre: BM2p+ UA-5
Recorders: Iriver

 

RSS | Mobile
Page created in 0.05 seconds with 30 queries.
© 2002-2024 Taperssection.com
Powered by SMF