Topic: Sound Devices MP-2...older vs. newer

[tbrown4]

I'm doing some research and talking to some folks about this. The older ones lack the necessary spring in the battery compartment which allows the use of rechargeable AAs. I've been told that this work could cost $75-$100 for SD to do. Is this something that could be fairly easy and safe to DIY? 

[sleepypedro]

I'm doing some research and talking to some folks about this. The older ones lack the necessary spring in the battery compartment which allows the use of rechargeable AAs. I've been told that this work could cost $75-$100 for SD to do. Is this something that could be fairly easy and safe to DIY? 

if i recall correctly, all you have to do is xacto off some of the plastic label on your AA batteries and they'll mount fine in an unmodified unit.

and i also think they were doing it for a flat rate of $50 at one point.

[M]

Be careful with what batteries you stick in the tube.  The width of some rechargeable batteries is too big for the battery tube and can be a major pain in the ass to get out once stuck.

[tbrown4]

Thanks for the feedback, all!

+T

..oh, wait

[su6oxone]

if i recall correctly, all you have to do is xacto off some of the plastic label on your AA batteries and they'll mount fine in an unmodified unit.

and i also think they were doing it for a flat rate of $50 at one point.

I don't really recommend trying to peel away the rechargeable battery jacket.  I did that when I was trying to see how to get it to work, and when I turned on the MP-2 there was some weird, loud, electrical-sounding "sizzle" and I instantly turned it off and got rid of that battery.  Don't think it's recommended to mess with the sleeves as they probably serve some purpose (googling perhaps would turn something up). 

FWIW, flat rate for MP-2/MixPre servicing nowadays is $75 plus parts and shipping to/from SD.  Costs about $100 if you don't need any major parts.