This new firmware 1.20 update is not happening for me...I'm a Mac person, using a Mac Mini, although I know very little about computers in general...Here is what I've done -think I've got this is the right order...(although I first tried this with a SanDisk 2GB card, and that didn't work either...)
1. Inserted the 64mb SD card that came w/the R-09, turned it on, formatted the card, turned the R-09 off.
2. Got the R09_update_120.sit
3. Unzipped that to my desktop - R09_update_120
4. Double clicked on this update icon, which produces a window with the DMZ15.UPD firmware.
4. Turned R-09 on, showed main screen, connected it to Mac via USB.
5. "No Name" icon appears on desktop. Double-clicked on this icon to produce a new window entitled "No Name" - and that window is completly blank.
6. Dragged the DMZ15.UPD firmware over to the empty window entitled "No Name", and dropped in that empty window. At this point the computer said it copied the material over.
7. Disconnected the R-09 from the computer(by dragging the "No Name" icon from the desktop to the eject dock, and disconnected the USB cable), and turned the R-09 off.
8. Pressed power and record at the same time to turn on the R-09(no error messages came up)
At this point it started up as it had previously, saying ver 1.03 at startup, and going to the main screen, and everthing looking as it had before...no screen showing details of current firmware version and the new one - I was told that "If it finds the firmware a screen will show that details the current firmware version, and the new one". This didn't happen. Any suggestions on what I am doing wrong?