Topic: MT 24/96 Charging

[Kurt8]

Got mine yesterday. Firmware seems to be 1.02 although 1.00 was displayed while charging. I charged it for 14 hours straight but never got "Charging Complete" in the display as the manual states. Anyone else have that problem? My L/M/H switch sems to be correct without the update.

Kurt

[udovdh]

Got mine yesterday. Firmware seems to be 1.02 although 1.00 was displayed while charging. I charged it for 14 hours straight but never got "Charging Complete" in the display as the manual states. Anyone else have that problem? My L/M/H switch sems to be correct without the update.

How did you test the L/M/H switch?
The charging is in progress here. (got it in today)
Got the `flickering` charging symbol once, got a 'full battery' symbol twice. Will continue charging until full 6 hours are done.

[Kurt8]

I simply put the switch on M, plugged a mic into the 1/8 jack and made a recording. I'm assuming that if the M setting is working with a mic then the L setting will work with a line level signal. It seems that some people reported that the M and L were switched on some units.

Kurt

[Kevinlane]

Mine has never given me a "charging complete"

it does stay backlite the whole time plugged in.

I tried turning it "off" the backlite goes off and then comes back on, but the battery icon starts "fillin up" again.

I have now done this 3 or 4 times with same "refill" happening.

still no messgae that charging is done.   Hmnn

[svenkid]

I get no messagesaying charge complete, but thebattery symbols stops filling up

to me that symbols that it's charged