Gear / Technical Help > User Manuals

Nakamichi CM-300

<< < (3/3)

gormenghast:
Can someone tell me the outside diameter of the nak300's?   Which clips or mount are you using?

capnhook:

--- Quote from: gormenghast on March 20, 2017, 02:22:27 PM ---Can someone tell me the outside diameter of the nak300's?   Which clips or mount are you using?

--- End quote ---

Diameter is 21mm, gormenghast.

AT8410a mounts are the sturdiest, but you can find others.

From Full Compass:



The Audio-Technica AT8410A shock mount is useful for isolating your microphone from vibrations that can travel up the mic stand and later appear as various strange noises or low end rumbling on your tracks.

Audio-Technica AT8410A Specifications:

    Height:  5.23" (133.3 mm)
    Depth:  3.93"
    Ring Diameter:  3.11" (79.0 mm)
    Net Weight:  6.3 oz (179 grams)
    Minimum Microphone Diameter:  0.66 (16.8 mm)
    Microphone Accepted:  Cylindrical or tapered within the limits above.
    Clamping System:  Spring-loaded "clothespin"
    Suspension System:  Elastic shock cord.
    Swivel Rotation:  180 degrees
    Attenuation:  8 dB to 10 dB broadband (depends on the microphone response, construction and mass)

gormenghast:

--- Quote from: capnhook on March 20, 2017, 07:01:46 PM ---Diameter is 21mm, gormenghast.

AT8410a mounts are the sturdiest, but you can find others.

--- End quote ---

Tight fit in the Schoeps SG20.  Thanks! 

Navigation

[0] Message Index

[*] Previous page