Gear / Technical Help > Recording Gear

M-Audio Microtrack 2496 FAQ

<< < (2/2)

pwig:

--- Quote from: Brian Skalinder on February 26, 2006, 01:36:55 PM ---For the Functionality section, I think it'd be useful to add something like the following:

[###]  My MT sometimes locks up when I try to start or stop a recording.  What's going on?

It appears the MT is sensitive to its start-up and file-stop conditions.  If the MT is not receiving a live S/PDIF signal when powering up or stopping a recording, the MT will sometimes freeze, i.e. lock up.  The only resolution to the freeze seems to be a re-set (hold down the power button until it powers off, then start over again).  Workaround:  ensure your MT is receiving a live S/PDIF signal before powering on or stopping a recording.



--- End quote ---

i cannot get my mt to power up. how do you just reset it?

hawghunter:

--- Quote from: pwig on July 18, 2007, 12:07:23 AM ---
--- Quote from: Brian Skalinder on February 26, 2006, 01:36:55 PM ---For the Functionality section, I think it'd be useful to add something like the following:

[###]  My MT sometimes locks up when I try to start or stop a recording.  What's going on?

It appears the MT is sensitive to its start-up and file-stop conditions.  If the MT is not receiving a live S/PDIF signal when powering up or stopping a recording, the MT will sometimes freeze, i.e. lock up.  The only resolution to the freeze seems to be a re-set (hold down the power button until it powers off, then start over again).  Workaround:  ensure your MT is receiving a live S/PDIF signal before powering on or stopping a recording.



--- End quote ---

i cannot get my mt to power up. how do you just reset it?

--- End quote ---

That happened to me after updating firmware, had to send unit back to M-Audio.
Does it take a charge?

Navigation

[0] Message Index

[*] Previous page