Taperssection.com
Gear / Technical Help => Cables => Topic started by: willndmb on November 09, 2006, 10:38:33 PM
-
i have a bumble bee VR box - as seen here http://taperssection.com/index.php?topic=43240.msg556326#msg556326
it has 1 XLR plug with 2 outs on it
1 is pass through
1 is 5v
i would like to have a cable made to work with the box (to replace/use in place of the cable shown in the thread above)
still 1 XLR with 2 outs, approx 18"
1 for UA-5
1 for Microtrack, usb
if you can help please lmk how much it would be and time frame
with a new baby coming in the next week or so i am not sure i should be spending money on taping or if i will even be able to go out taping but i would like to check my options
thanks
-
FWIW, you can do this yourself easily enough at very low cost. No soldering required, just use the existing cable, but modify with the appropriate connectors. Splice a UA5 plug onto the passthrough cable, and the MT's USB connector to the 5v cable (sorry, don't know the pinout, though I bet it's on here somewhere, or someone who knows it), using screw-on wire connectors. They're inexpensive, easy to use, secure, and field-serviceable.
-
fwiw, the xlr's on my mini vr box are 4 pin. i would imagine yours are as well.
-
thanks guys
yes its 4 pin and the top cover tells what pins are for what
i don't really want to convert the cable though because at times i still use the jb3, i rather get a new cable so i can switch back and forth if need be