Become a Site Supporter and Never see Ads again!

Author Topic: Fixing soundboard vocal reverb?  (Read 1467 times)

0 Members and 1 Guest are viewing this topic.

Offline cd2go

  • Trade Count: (10)
  • Taperssection Member
  • ***
  • Posts: 517
  • Gender: Male
    • Strictly Slambovian
Fixing soundboard vocal reverb?
« on: March 06, 2022, 08:05:56 PM »
Working on a matrix with on-stage mics that sound fantastic but the recording needs some vocals from the soundboard mix. Unfortunately they are noticeably echoey in spots. Is there any way to help reduce echo using simple EQ or basic plugins? Editing with Amadeus Pro but can also use Audacity.

Thanks in advance!
-James
« Last Edit: March 07, 2022, 11:54:55 AM by cd2go »

Offline Fatah Ruark (aka MIKE B)

  • Trade Count: (9)
  • Needs to get out more...
  • *****
  • Posts: 9776
  • Gender: Male
  • I dream in beige.
    • sloppy.art.ink
Re: Fixing soundboard vocal echo?
« Reply #1 on: March 06, 2022, 09:41:55 PM »
Echo or Reverb?

iZotope has a "De-Reverb" function. Never really used it so no idea how well it works.
||| MICS:  Beyer CK930 ~ DPA 4022 ~ DPA 4080 ~ Nevaton MCE400 ~ Countryman B3 ~ Sennheiser Ambeo Headset |||
||| PREAMPS: DPA d:vice | Naiant Tinybox | Naiant Littlebox | Naiant IPA | Church BB |||
||| DECKS: Sound Devices MixPre6 | Sony M10 | Sony A10 | iPod Touch 32GB |||
|||Concert History || LMA Recordings || Live YouTube |||

Offline tim in jersey

  • Site Supporter
  • Trade Count: (8)
  • Needs to get out more...
  • *
  • Posts: 3717
  • Gender: Male
Re: Fixing soundboard vocal echo?
« Reply #2 on: March 06, 2022, 11:35:46 PM »
Nothing constructive to contribute, but I've had that happen a number of times. Kinda sux.

Offline opsopcopolis

  • Trade Count: (3)
  • Taperssection All-Star
  • ****
  • Posts: 1930
Re: Fixing soundboard vocal echo?
« Reply #3 on: March 07, 2022, 12:02:22 AM »
Are we talking intentional delay/reverb? Echo between the sources?

Offline cd2go

  • Trade Count: (10)
  • Taperssection Member
  • ***
  • Posts: 517
  • Gender: Male
    • Strictly Slambovian
Re: Fixing soundboard vocal echo?
« Reply #4 on: March 07, 2022, 09:29:09 AM »
Are we talking intentional delay/reverb? Echo between the sources?

Maybe my terminology is off, guess it is reverb? It’s just from the lead vocals on the house feed, and not on every song. I definitely heard it out in the audience too. The vocals picked up on-stage from the monitors seem unaffected, but definitely need the help of the board feed.  I’ll post a sound sample tonight. Thanks!

Offline nulldogmas

  • Trade Count: (6)
  • Taperssection All-Star
  • ****
  • Posts: 1343
    • How I Escaped My Uncertain Fate
Re: Fixing soundboard vocal echo?
« Reply #5 on: March 07, 2022, 11:11:34 AM »
Are we talking intentional delay/reverb? Echo between the sources?

Maybe my terminology is off, guess it is reverb? It’s just from the lead vocals on the house feed, and not on every song. I definitely heard it out in the audience too. The vocals picked up on-stage from the monitors seem unaffected, but definitely need the help of the board feed.  I’ll post a sound sample tonight. Thanks!

There is a definite trend among soundfolk to try to sweeten vocals by cranking the reverb up to 11. I have a couple of shows that suffer from similar "vocals sound like they were recorded at the bottom of a well" — I'll have to experiment with that iZotope filter to see what it can do.

Offline Gutbucket

  • record > listen > revise technique
  • Trade Count: (15)
  • Needs to get out more...
  • *****
  • Posts: 14740
  • Gender: Male
  • "and the rowers keep on rowing!"
Re: Fixing soundboard vocal reverb?
« Reply #6 on: March 07, 2022, 12:21:11 PM »
Try delaying the soundboard recording slightly.  Set it up so you can listen while adjusting the delay time (or micro-shifting the soundboard tracks relative to those of the on-stage pair).  If your mics were setup on-stage it probably won't take much, likely something less than 12 milliseconds or so.

Alternately there could be some delay through the soundboard, in which case you'd need to delay your on-stage mics instead of the soundboard to get the two aligned (the delay time needed in that case could be whatever, but is still likely to be minimal).  Try it both ways, listening carefully to see if you can eliminate the echo this way.
musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<< (note: This is a 1st draft, now several years old and in need of revision!  Stay tuned)

Offline opsopcopolis

  • Trade Count: (3)
  • Taperssection All-Star
  • ****
  • Posts: 1930
Re: Fixing soundboard vocal echo?
« Reply #7 on: March 07, 2022, 02:24:20 PM »
Are we talking intentional delay/reverb? Echo between the sources?

Maybe my terminology is off, guess it is reverb? It’s just from the lead vocals on the house feed, and not on every song. I definitely heard it out in the audience too. The vocals picked up on-stage from the monitors seem unaffected, but definitely need the help of the board feed.  I’ll post a sound sample tonight. Thanks!

There is a definite trend among soundfolk to try to sweeten vocals by cranking the reverb up to 11. I have a couple of shows that suffer from similar "vocals sound like they were recorded at the bottom of a well" — I'll have to experiment with that iZotope filter to see what it can do.

I guess I'm a proponent of "leave it how it was mixed." If I went down the rabbit hole of trying to de-reverb/rebalance instruments in a 2 track mix, I'd never finish anything. Maybe the band wanted it verb heavy

Offline nulldogmas

  • Trade Count: (6)
  • Taperssection All-Star
  • ****
  • Posts: 1343
    • How I Escaped My Uncertain Fate
Re: Fixing soundboard vocal echo?
« Reply #8 on: March 07, 2022, 02:47:49 PM »

There is a definite trend among soundfolk to try to sweeten vocals by cranking the reverb up to 11. I have a couple of shows that suffer from similar "vocals sound like they were recorded at the bottom of a well" — I'll have to experiment with that iZotope filter to see what it can do.

I guess I'm a proponent of "leave it how it was mixed." If I went down the rabbit hole of trying to de-reverb/rebalance instruments in a 2 track mix, I'd never finish anything. Maybe the band wanted it verb heavy

I agree in general, but in cases where there's a sudden burst of reverb because the soundperson was overexuberantly sliding faders, I don't think it was intentional.

In one case in particular I'm thinking of, the soundperson actually apologized to me afterwards for the wonky mix...

Offline cd2go

  • Trade Count: (10)
  • Taperssection Member
  • ***
  • Posts: 517
  • Gender: Male
    • Strictly Slambovian
Re: Fixing soundboard vocal echo?
« Reply #9 on: March 07, 2022, 02:51:50 PM »
Try delaying the soundboard recording slightly.  Set it up so you can listen while adjusting the delay time (or micro-shifting the soundboard tracks relative to those of the on-stage pair).  If your mics were setup on-stage it probably won't take much, likely something less than 12 milliseconds or so.

Alternately there could be some delay through the soundboard, in which case you'd need to delay your on-stage mics instead of the soundboard to get the two aligned (the delay time needed in that case could be whatever, but is still likely to be minimal).  Try it both ways, listening carefully to see if you can eliminate the echo this way.

That sounds easy enough, I’ll give it a shot thanks!

I guess I'm a proponent of "leave it how it was mixed." If I went down the rabbit hole of trying to de-reverb/rebalance instruments in a 2 track mix, I'd never finish anything. Maybe the band wanted it verb heavy

Thanks I needed to hear that. Probably what will end up happening but I’d like to learn a bit and try before giving in.

Offline Gutbucket

  • record > listen > revise technique
  • Trade Count: (15)
  • Needs to get out more...
  • *****
  • Posts: 14740
  • Gender: Male
  • "and the rowers keep on rowing!"
Re: Fixing soundboard vocal reverb?
« Reply #10 on: March 07, 2022, 03:24:45 PM »
If the echo / excess reverb is in the soundboard feed itself, better alignment of the sources wont fix it.  You can determine that by listening to the soundboard solo'd all by itself.  Listen for the vocals in it sounding echoy / over-reverberant prior to your on-stage microphones being mixed with it.
musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<< (note: This is a 1st draft, now several years old and in need of revision!  Stay tuned)

Online morst

  • Trade Unionist
  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 5157
Re: Fixing soundboard vocal reverb?
« Reply #11 on: March 07, 2022, 05:07:58 PM »
In situations where venues are small enough that only vocals and effects go through the PA system, you might hear some very "wet" vocals because there is nothing else in the mix to obscure them.
Small stages with loud guitars and drums only need the less loud sources amplified, like vocals, effects (non existent in nature!), keyboards, electronic drums, and acoustic guitars.
Board tapes from small venues thus are commonly heavy on the effects.


It is typical for stage monitor feeds to be 100% dry, and have zero added reverb or delay. It's tough enough to point speakers at microphones and not let them feed back without sounds hanging around longer than necessary (additional reverberation would be bad for this)


If vocals sounded reverb-y at the show, then the recording will show that.
I would just mix it a little lower than otherwise, but be careful not to bury the vocals too much.
Some types of music lend themselves to lower vocals, like grunge and metal... wanna hear it? CRANK IT UP.
Pop mixes generally are more intelligible, so a pop style band you can't really get away with burying them, so it's just gonna sound like it sounded.
Dunno if this helps at all.

Offline Gutbucket

  • record > listen > revise technique
  • Trade Count: (15)
  • Needs to get out more...
  • *****
  • Posts: 14740
  • Gender: Male
  • "and the rowers keep on rowing!"
Re: Fixing soundboard vocal reverb?
« Reply #12 on: March 07, 2022, 07:52:54 PM »
^astute.

An alt-rock/pop genre exception that comes to mind is early era REM.  I recall hearing in an interview back in the 80's about how they fought to keep Stipe's vocals lower in the mix than typical on the first few albums to achieve the sound they were after.
musical volition > vibrations > voltages > numeric values > voltages > vibrations> virtual teleportation time-machine experience
Better recording made easy - >>Improved PAS table<< | Made excellent- >>click here to download the Oddball Microphone Technique illustrated PDF booklet<< (note: This is a 1st draft, now several years old and in need of revision!  Stay tuned)

Offline EmRR

  • Trade Count: (5)
  • Taperssection Member
  • ***
  • Posts: 717
    • ElectroMagnetic Radiation Recorders
Re: Fixing soundboard vocal reverb?
« Reply #13 on: March 07, 2022, 08:07:10 PM »
If you have RX7/8/9 you could try music rebalance to separate the soundboard elements and possibly edit the vocals by themselves. 
Mics: DPA 4060 w/MPS 6030 PSU/DAD6001/DAD4099, Neumann KM 131, Oktava MK 012, Sennheiser MKH 105, MKH 20, MKH 30, MKH 40, MKH 800 TWIN
Recorders: Zoom F8n, Sony MZ-R50

Offline cd2go

  • Trade Count: (10)
  • Taperssection Member
  • ***
  • Posts: 517
  • Gender: Male
    • Strictly Slambovian
Re: Fixing soundboard vocal reverb?
« Reply #14 on: March 07, 2022, 08:57:06 PM »
If the echo / excess reverb is in the soundboard feed itself, better alignment of the sources wont fix it.  You can determine that by listening to the soundboard solo'd all by itself.  Listen for the vocals in it sounding echoy / over-reverberant prior to your on-stage microphones being mixed with it.

Yes, this is the case :-\ Here's a sample of the worst example of it, if anyone with fancy plug-ins is bored, but I'm starting to make peace with it:

https://www.mediafire.com/file/aoyu1lao3lpi6q3/Reverb_sample.wav/file

I would just mix it a little lower than otherwise, but be careful not to bury the vocals too much.

Good idea, I'm already playing with the board mix level in hopes of minimizing the offending (to me anyway) vocals while still making it present and pleasing.

 

RSS | Mobile
Page created in 0.063 seconds with 37 queries.
© 2002-2022 Taperssection.com
Powered by SMF