Become a Site Supporter and Never see Ads again!

Author Topic: TEAM Marantz PMD 660 (Part II)  (Read 102782 times)

0 Members and 1 Guest are viewing this topic.

Offline bobbygeeWOW

  • Trade Count: (10)
  • Taperssection Member
  • ***
  • Posts: 499
  • Gender: Male
Re: Marantz PMD 660 (Part II)
« Reply #120 on: October 19, 2007, 02:55:11 PM »
Hi, I'm sorry I don't have any suggestions but thought I would add that I've run my deck in blazing hot 4-day festival with no problem.
Only problem i encountered was a bunk CF card once. (first time out of course..)

Offline tfs8271

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2593
  • Gender: Male
  • Hand polished by Chris Lindsey
Re: Marantz PMD 660 (Part II)
« Reply #121 on: October 19, 2007, 05:30:12 PM »
^ It has to be heat. I've never had this problem and I keep my rig out side the bag or in huge fanny pack that I carry it in. Most of the time the 660 is resting against my mic stand pointing upwards so I can see it while I'm dancing.

GDfan.........Could you have had your deck sitting on the floor board of your car or resting on the center console of a standard manual transmission car? They can get reather hot from the heat of your transmission and engine. Just a thought.
A six pack a day, that's all we ask.

Neumann skm140>ACM Oade PMD660
or Oade Mod R4

Offline GDfan

  • Trade Count: (15)
  • Taperssection Member
  • ***
  • Posts: 961
  • Gender: Male
Re: Marantz PMD 660 (Part II)
« Reply #122 on: October 19, 2007, 10:24:21 PM »
auto transmission , and it was on the back seat for 10min, then spyder9 was fiddling with it for a couple minutes, he listened to part of it and then listened to his edirol, went back to listen to mine and it was non responsive.

it dun ded
Neumann SKM184 / AKG 568EB > Sound Devices MixPre3
http://www.archive.org/bookmarks/CLaPorte

Offline GDfan

  • Trade Count: (15)
  • Taperssection Member
  • ***
  • Posts: 961
  • Gender: Male
Re: Marantz PMD 660 (Part II)
« Reply #123 on: October 23, 2007, 03:19:51 PM »
I got my SRA # from Marantz this morning, shipped out the 660, I'll see what they say in a few days.
Neumann SKM184 / AKG 568EB > Sound Devices MixPre3
http://www.archive.org/bookmarks/CLaPorte

Offline Jammin72

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 841
  • Gender: Male
Re: Marantz PMD 660 (Part II)
« Reply #124 on: October 23, 2007, 03:31:06 PM »
I'll keep posting this in regard to the 660, just because a CF card works on your computer does not mean that the 660 likes it.  I went through the tech support circle trying to get an issue solved with my 660 using a Sandisk card that I thought was working just fine. If you call Marantz tech support they'll blame the card every time unless it's a Lexar Card.  If you call Sandisk to get a new card they'll blame incompatibility with the machine.  I had my 660 Lock up during recording for a card that worked in everything else I threw it into. I got to the point where I was ready to just sell the machine because I couldn't count on it as being a reliable device.  Finally bucked up and purchased the Lexar and had zero problems from there on out.  They've tweaked this box with this media in mind and it shows. If you own one of these and want real assistance from Marantz use the recommended media.

This almost reminds me of the 'ole 90meter DDS debate.
 ;)

Yes, but what do you HEAR?

Offline danlynch

  • Trade Count: (16)
  • Needs to get out more...
  • *****
  • Posts: 3470
  • Gender: Male
    • nyctaper
Re: Marantz PMD 660 (Part II)
« Reply #125 on: October 23, 2007, 04:33:29 PM »
I used the 660 and the same SanDisk card flawlessly last night to record a set that was slightly more than 90 minutes. 
Founder and Host of NYCTaper:  http://www.nyctaper.com

Microphones:  Schoeps CCM4Us, Sennheiser MKH-8040s, Neumann KM-150s, Neumann TLM-102s, DPA 4061s
Recorders:  Sound Devices 744t, Edirol R-44 (Oade Concert Mod), Edirol R-05
Pre-Amps, D/A's:  Apogee Mini-Me

My Recordings on Archive.org: http://www.archive.org/bookmarks/danlynch

Offline intpseeker

  • Trade Count: (8)
  • Taperssection Member
  • ***
  • Posts: 813
  • Gender: Male
  • In music the passions enjoy themselves
Re: Marantz PMD 660 (Part II)
« Reply #126 on: October 24, 2007, 06:57:39 AM »
I'll keep posting this in regard to the 660, just because a CF card works on your computer does not mean that the 660 likes it.  I went through the tech support circle trying to get an issue solved with my 660 using a Sandisk card that I thought was working just fine. If you call Marantz tech support they'll blame the card every time unless it's a Lexar Card.  If you call Sandisk to get a new card they'll blame incompatibility with the machine.  I had my 660 Lock up during recording for a card that worked in everything else I threw it into. I got to the point where I was ready to just sell the machine because I couldn't count on it as being a reliable device.  Finally bucked up and purchased the Lexar and had zero problems from there on out.  They've tweaked this box with this media in mind and it shows. If you own one of these and want real assistance from Marantz use the recommended media.

This almost reminds me of the 'ole 90meter DDS debate.
 ;)

When i got my acm660 from Doug Oade, he was recommending Lexar, Viking and PNY on Marantz's say so.

I have all three and only had trouble once with a PNY card in the slot. Lost the second set of a kick-ass RRE show, nothing there to recover, even though all the pretty lights danced throughout the set. Never happened again and I've use that card repeatedly since.


Mics:        Akg 451 eb A51's, ck-1's, ck-2's, ck 8's
                Peluso CEMC6 MK2, MK4, MK21, MK41
                AKG 391
                CA-11 cards and omnis
Pre:          ST-9100
Cables:     XTC Silvers, DT47-12's
Recorders: ACM PMD660
                 Busman modded R-4
                 PCM-M10
                 DR-70D
                 Church modded R-09 micsketeer
“One good thing about music, when it hits- you feel no pain” - Bob Marley

Offline tfs8271

  • Trade Count: (0)
  • Needs to get out more...
  • *****
  • Posts: 2593
  • Gender: Male
  • Hand polished by Chris Lindsey
Re: Marantz PMD 660 (Part II)
« Reply #127 on: October 24, 2007, 08:38:49 AM »
Don't use any of those cards and I've never had any problems mentioned above. Only with power and ever sense I bought a 5 V battery pack not one issue. Love my 660. Most of the time it sounds better than my R4.
A six pack a day, that's all we ask.

Neumann skm140>ACM Oade PMD660
or Oade Mod R4

Offline intpseeker

  • Trade Count: (8)
  • Taperssection Member
  • ***
  • Posts: 813
  • Gender: Male
  • In music the passions enjoy themselves
Re: Marantz PMD 660 (Part II)
« Reply #128 on: October 24, 2007, 07:05:17 PM »
Don't use any of those cards and I've never had any problems mentioned above. Only with power and ever sense I bought a 5 V battery pack not one issue. Love my 660. Most of the time it sounds better than my R4.


What 5 volt pack do you use?
Mics:        Akg 451 eb A51's, ck-1's, ck-2's, ck 8's
                Peluso CEMC6 MK2, MK4, MK21, MK41
                AKG 391
                CA-11 cards and omnis
Pre:          ST-9100
Cables:     XTC Silvers, DT47-12's
Recorders: ACM PMD660
                 Busman modded R-4
                 PCM-M10
                 DR-70D
                 Church modded R-09 micsketeer
“One good thing about music, when it hits- you feel no pain” - Bob Marley

Offline NOLAfishwater

  • is not taping much these days
  • Trade Count: (72)
  • Needs to get out more...
  • *****
  • Posts: 6344
  • Gender: Male
  • I LIKE FISHIN
Re: Marantz PMD 660 (Part II)
« Reply #129 on: October 24, 2007, 08:02:37 PM »
Don't use any of those cards and I've never had any problems mentioned above. Only with power and ever sense I bought a 5 V battery pack not one issue. Love my 660. Most of the time it sounds better than my R4.


What 5 volt pack do you use?

It is small, 11 Watt hours and is only $49.95
http://www.bixnet.com/misihicabapa.html 

or a step up from that

Here is the next step up: 26 Watt hours and is $69.95
http://www.bixnet.com/5v7libapa.html

or the 44 Watt Hour model for $99.00 this is the one I bought
http://www.bixnet.com/mumiexbapaki1.html

I chose external batteries b/c of the fact that you don't have to worry about changing them and you can take them to festies and run all day on the one that I bought.

Offline intpseeker

  • Trade Count: (8)
  • Taperssection Member
  • ***
  • Posts: 813
  • Gender: Male
  • In music the passions enjoy themselves
Re: Marantz PMD 660 (Part II)
« Reply #130 on: October 24, 2007, 08:34:17 PM »
Don't use any of those cards and I've never had any problems mentioned above. Only with power and ever sense I bought a 5 V battery pack not one issue. Love my 660. Most of the time it sounds better than my R4.


What 5 volt pack do you use?

It is small, 11 Watt hours and is only $49.95
http://www.bixnet.com/misihicabapa.html 

or a step up from that

Here is the next step up: 26 Watt hours and is $69.95
http://www.bixnet.com/5v7libapa.html

or the 44 Watt Hour model for $99.00 this is the one I bought
http://www.bixnet.com/mumiexbapaki1.html

I chose external batteries b/c of the fact that you don't have to worry about changing them and you can take them to festies and run all day on the one that I bought.

Nice. What kind of run time do you get with that little one?
Mics:        Akg 451 eb A51's, ck-1's, ck-2's, ck 8's
                Peluso CEMC6 MK2, MK4, MK21, MK41
                AKG 391
                CA-11 cards and omnis
Pre:          ST-9100
Cables:     XTC Silvers, DT47-12's
Recorders: ACM PMD660
                 Busman modded R-4
                 PCM-M10
                 DR-70D
                 Church modded R-09 micsketeer
“One good thing about music, when it hits- you feel no pain” - Bob Marley

Offline GDfan

  • Trade Count: (15)
  • Taperssection Member
  • ***
  • Posts: 961
  • Gender: Male
Re: Marantz PMD 660 (Part II)
« Reply #131 on: October 26, 2007, 12:52:08 PM »
I got my 660 back in the mail today from Marantz, on the invoice it simply stated:

System Rom.

I am guessing a bad chip on the board.

nice turn around time from Marantz. good customer service.
Neumann SKM184 / AKG 568EB > Sound Devices MixPre3
http://www.archive.org/bookmarks/CLaPorte

Offline NOLAfishwater

  • is not taping much these days
  • Trade Count: (72)
  • Needs to get out more...
  • *****
  • Posts: 6344
  • Gender: Male
  • I LIKE FISHIN
Re: Marantz PMD 660 (Part II)
« Reply #132 on: October 26, 2007, 01:45:43 PM »
good to hear that you got it fixed so quickly. I just put my Busman 660 on the yard sale. I don't care if it sells or not. It is a great box and don't mind holding on to it.

Offline motobill

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 20
Re: Marantz PMD 660 (Part II)
« Reply #133 on: October 29, 2007, 06:23:34 PM »
good to hear that you got it fixed so quickly. I just put my Busman 660 on the yard sale. I don't care if it sells or not. It is a great box and don't mind holding on to it.
Don't see it, but I'm interested so PM me with info.

Offline NOLAfishwater

  • is not taping much these days
  • Trade Count: (72)
  • Needs to get out more...
  • *****
  • Posts: 6344
  • Gender: Male
  • I LIKE FISHIN
Re: Marantz PMD 660 (Part II)
« Reply #134 on: October 30, 2007, 04:41:24 PM »
good to hear that you got it fixed so quickly. I just put my Busman 660 on the yard sale. I don't care if it sells or not. It is a great box and don't mind holding on to it.
Don't see it, but I'm interested so PM me with info.

I sent you an email.

 

RSS | Mobile
Page created in 0.075 seconds with 41 queries.
© 2002-2024 Taperssection.com
Powered by SMF