Taperssection.com
Gear / Technical Help => Remote Power => Topic started by: mmadd29 on April 09, 2007, 12:43:07 PM
-
I'm going to make a power pack using 1.2V, 2400mAh, NiMH batteries. Now to get close to 9v , I would use 8 batteries, which would be 9.6 v. Would this damage the AD-20 since it is 9v input. Is the AD-20 forgiving of a slightly higher voltage.
Thanks
-
I'm going to make a power pack using 1.2V, 2400mAh, NiMH batteries. Now to get close to 9v , I would use 8 batteries, which would be 9.6 v. Would this damage the AD-20 since it is 9v input. Is the AD-20 forgiving of a slightly higher voltage.
Thanks
Yes, the AD-20 can take a higher voltage. Like the PS-2 will take an external 7-24 volt supply, my Zefiro Inbox (same as an AD-20) label says it will take 6-24 volts from an external power source.