Become a Site Supporter and Never see Ads again!

Author Topic: Windscreens for AT853  (Read 5487 times)

0 Members and 1 Guest are viewing this topic.

Offline Popmarter

  • Trade Count: (2)
  • Taperssection Member
  • ***
  • Posts: 683
  • Gender: Male
Windscreens for AT853
« on: June 28, 2017, 11:21:01 AM »
Hi, I bought these windscreens for my AT853, the AT8153
https://www.thomann.de/nl/audio_technica_at_8153.htm?ref=search_rslt_at8153_138950_0

Seem to fit, but can someone recommend something smaller?
Recorders: SD MixPre 3 II; Sony A10; Edirol R44; Sony M10; Sony WM-D6; Edirol R-09HR; iRiver IHP-120; Sharp MD-MT20; Sharp MD-MT190
Microphones: Nevaton MC59/S (cards); Milab VM-44 Links (cards), AT853 7.4mod (cards); AT831 (cards); Nakamichi CM300 (all CP's); Soundman OKM II Rock Studios
Preamps: Beyerdynamic MV100; JK Laboratories DVC-X-17b; Naiant IPA; Nakamichi MX-100 modded for 9v battery use

Offline Perry

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 551
  • Gender: Male
Re: Windscreens for AT853
« Reply #1 on: June 28, 2017, 11:37:41 AM »
I use these: http://www.soundprofessionals.com/cgi-bin/gold/category.cgi?item=SH-PREM-WS

They fit and work very well. Just be careful that the plastic locking ring doesn't block the mic's side vents when you install them.
"It hurts to lean back in handcuffs..."
^^~~~~~~~Todd Snider~~~~~~~^^

Offline beatkilla

  • Trade Count: (64)
  • Needs to get out more...
  • *****
  • Posts: 2041
  • Gender: Male
Re: Windscreens for AT853
« Reply #2 on: June 28, 2017, 01:44:00 PM »
In my experience only the locking bigger windscreens work, the other smaller ones do nothing to stop wind at all.

Offline Popmarter

  • Trade Count: (2)
  • Taperssection Member
  • ***
  • Posts: 683
  • Gender: Male
Re: Windscreens for AT853
« Reply #3 on: June 28, 2017, 01:48:45 PM »
In my experience only the locking bigger windscreens work, the other smaller ones do nothing to stop wind at all.

With the smaller ones, you mean the ones from SoundProfessionals?
Recorders: SD MixPre 3 II; Sony A10; Edirol R44; Sony M10; Sony WM-D6; Edirol R-09HR; iRiver IHP-120; Sharp MD-MT20; Sharp MD-MT190
Microphones: Nevaton MC59/S (cards); Milab VM-44 Links (cards), AT853 7.4mod (cards); AT831 (cards); Nakamichi CM300 (all CP's); Soundman OKM II Rock Studios
Preamps: Beyerdynamic MV100; JK Laboratories DVC-X-17b; Naiant IPA; Nakamichi MX-100 modded for 9v battery use

Offline lsd2525

  • Trade Count: (18)
  • Needs to get out more...
  • *****
  • Posts: 3277
  • Gender: Male
  • Eschew obfuscation
Re: Windscreens for AT853
« Reply #4 on: June 28, 2017, 03:28:01 PM »
I can't vouch for the "smaller" ones, but the AT8153 are a two-stage design, and do a very good job. Are you wanting smaller ones for 007 work?
Mics: SKM184's; ADK A51s; AT4041; Line CM3; Superlux S502; CK91 active w/homebrew BB; AT853; Naiant X-X; Nak 300's
Recorders: M10; DR-60D; DR-701D

Offline Popmarter

  • Trade Count: (2)
  • Taperssection Member
  • ***
  • Posts: 683
  • Gender: Male
Re: Windscreens for AT853
« Reply #5 on: June 28, 2017, 03:29:35 PM »
 yeah 007 in a stadium....
Recorders: SD MixPre 3 II; Sony A10; Edirol R44; Sony M10; Sony WM-D6; Edirol R-09HR; iRiver IHP-120; Sharp MD-MT20; Sharp MD-MT190
Microphones: Nevaton MC59/S (cards); Milab VM-44 Links (cards), AT853 7.4mod (cards); AT831 (cards); Nakamichi CM300 (all CP's); Soundman OKM II Rock Studios
Preamps: Beyerdynamic MV100; JK Laboratories DVC-X-17b; Naiant IPA; Nakamichi MX-100 modded for 9v battery use

Offline Perry

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 551
  • Gender: Male
Re: Windscreens for AT853
« Reply #6 on: June 28, 2017, 05:35:39 PM »
yeah 007 in a stadium....
Then you want the small ones from SP. They work just fine isolating HVAC noises, etc. For outdoor use I put home-made dead rats over them.
"It hurts to lean back in handcuffs..."
^^~~~~~~~Todd Snider~~~~~~~^^

Offline nulldogmas

  • Trade Count: (6)
  • Taperssection All-Star
  • ****
  • Posts: 1424
    • How I Escaped My Uncertain Fate
Re: Windscreens for AT853
« Reply #7 on: March 24, 2019, 09:29:08 PM »
I use these: http://www.soundprofessionals.com/cgi-bin/gold/category.cgi?item=SH-PREM-WS

They fit and work very well. Just be careful that the plastic locking ring doesn't block the mic's side vents when you install them.

I recently picked up a pair of these on the recommendation of this thread, and while they fit great, it's really hard to tell if the locking ring is blocking the vents. I'm going to do some sound comparison tests to try to tell, but anyone else have any advice for avoiding this problem?

Offline Perry

  • Trade Count: (0)
  • Taperssection Member
  • ***
  • Posts: 551
  • Gender: Male
Re: Windscreens for AT853
« Reply #8 on: March 25, 2019, 03:39:17 PM »
I use these: http://www.soundprofessionals.com/cgi-bin/gold/category.cgi?item=SH-PREM-WS

They fit and work very well. Just be careful that the plastic locking ring doesn't block the mic's side vents when you install them.

I recently picked up a pair of these on the recommendation of this thread, and while they fit great, it's really hard to tell if the locking ring is blocking the vents. I'm going to do some sound comparison tests to try to tell, but anyone else have any advice for avoiding this problem?
As you slide the windscreen on an AT853 you'll feel a detent when the locking ring drops into the vents. When you feel that, pull the screen forward a bit, to just before the detent. You can also push it on past the detent but I mostly use SRS mounts so I can't cover too much of the mic body with a screen or it won't fit in the mount. This has been my experience with both card and omni capsules. I'll be interested to hear the results of your tests, I'm guessing that I wouldn't be able to hear the difference with amplified music but never wanted to chance it a a live gig.
"It hurts to lean back in handcuffs..."
^^~~~~~~~Todd Snider~~~~~~~^^

Offline nulldogmas

  • Trade Count: (6)
  • Taperssection All-Star
  • ****
  • Posts: 1424
    • How I Escaped My Uncertain Fate
Re: Windscreens for AT853
« Reply #9 on: March 25, 2019, 07:19:37 PM »
As you slide the windscreen on an AT853 you'll feel a detent when the locking ring drops into the vents. When you feel that, pull the screen forward a bit, to just before the detent. You can also push it on past the detent but I mostly use SRS mounts so I can't cover too much of the mic body with a screen or it won't fit in the mount. This has been my experience with both card and omni capsules. I'll be interested to hear the results of your tests, I'm guessing that I wouldn't be able to hear the difference with amplified music but never wanted to chance it a a live gig.

Oh, stop short of the vents — that hadn't occurred to me. Do I not have to worry about wind noise on the sides of the mics?

The recordings I made with the windscreens snapped all the way on sound okay, but I've never recorded in these locations at these venues before, so I don't have a good grounds for comparison. Lemme do a test with my stereo right now.

Offline nulldogmas

  • Trade Count: (6)
  • Taperssection All-Star
  • ****
  • Posts: 1424
    • How I Escaped My Uncertain Fate
Re: Windscreens for AT853
« Reply #10 on: March 25, 2019, 08:00:23 PM »
Okay, that was interesting. There's no audible difference between having the windscreens off and having them just over the tips of the mics, but when they cover the vents you can definitely hear a difference:

http://demause.net/wp/wp-content/uploads/2019/03/windscreen-uncovered.mp3

http://demause.net/wp/wp-content/uploads/2019/03/windscreen-covered.mp3

And below is a spectral analysis of the two superimposed (green=uncovered, red=covered). I may try some EQ for those two affected sections to see if it improves my recordings from last week any. (For future recordings I'll avoid sliding the windscreens past the vents at all.)

Offline RyanJ

  • Site Supporter
  • Trade Count: (3)
  • Taperssection Member
  • *
  • Posts: 512
  • Gender: Male
    • Nine Inch Nails Live Archive
Re: Windscreens for AT853
« Reply #11 on: May 06, 2019, 01:56:10 PM »
I used my AT853s the other day and had some really gnarly wind noise from some ceiling fans. I guess I've never known what the side grates are used for on the mics? Definitely want to get some smaller windscreens for 007. I was always under the assumption that the top of the mic was where the sound came in from?

http://www.ninlive.com
Mics: Schoeps MK4s, AT853 (4.7k mod)
Pre: Naiant IPA v1.0, Babynbox
Recorders: M10, A10, Zoom F8n, Marantz PMD-620 (Concert Mod), TCD-D8
Transfers: Nakamichi CR-3A, Tascam DA-20

Offline DavidPuddy

  • Trade Count: (16)
  • Taperssection All-Star
  • ****
  • Posts: 1578
Re: Windscreens for AT853
« Reply #12 on: May 06, 2019, 02:11:23 PM »
I used my AT853s the other day and had some really gnarly wind noise from some ceiling fans. I guess I've never known what the side grates are used for on the mics? Definitely want to get some smaller windscreens for 007. I was always under the assumption that the top of the mic was where the sound came in from?

Sound enters both the front grille area (for end address capsules) and the "vents," which are used on directional mics for reduction in off axis sound.

You may have some luck finding dead rats for the 853s.

Offline heathen

  • Trade Count: (23)
  • Needs to get out more...
  • *****
  • Posts: 3456
Re: Windscreens for AT853
« Reply #13 on: May 06, 2019, 03:53:28 PM »
I used my AT853s the other day and had some really gnarly wind noise from some ceiling fans. I guess I've never known what the side grates are used for on the mics? Definitely want to get some smaller windscreens for 007. I was always under the assumption that the top of the mic was where the sound came in from?

I've been meaning to try these but haven't gotten around to it yet: http://taperssection.com/index.php?topic=187778.0
Mics: AT4050ST | AT4031 | AT853 (C/SC) | Line Audio CM3 | Sennheiser e614 | Sennheiser MKE2 | DPA 4061 Pre: CA9200 Decks: Zoom F8 | Roland R-05

Offline seethreepo

  • Trade Count: (10)
  • Taperssection All-Star
  • ****
  • Posts: 1254
  • Gender: Male
  • Resist Or Serve
Re: Windscreens for AT853
« Reply #14 on: May 06, 2019, 04:01:22 PM »
I use simple lapel mic screens   50 for $5.00 style ones easily available on ebay.   , yes not good for a windstorm but otherwise... 
and I tend to lose clips and screens all the time makes it much easier to deal with a loss than a 15- 20 $ piece. 
"Never heard anyone say that music was the thing that fucked up their day" 
-Chris Robinson 1996-09-24

 real recorder > phone
 external mics > Internal mics
 FOB > Taper Section
 HATS > better than Denied

Offline nulldogmas

  • Trade Count: (6)
  • Taperssection All-Star
  • ****
  • Posts: 1424
    • How I Escaped My Uncertain Fate
Re: Windscreens for AT853
« Reply #15 on: October 12, 2022, 03:58:39 PM »

Offline vibrioidxire

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 40
  • Gender: Male
  • Where am I?
Re: Windscreens for AT853
« Reply #16 on: October 12, 2022, 06:05:20 PM »
i have what OP has, but have struggled to figure out a way to clamp the mics with those windscreens for taping... anyone have any solutions?
Mics: SP-CMC-4U (4.7k mod) (c, h caps) - Shure MV88, SM57 (2x), & SM58.
BB's: SP-SPSB-10
Recs: Sony PCM-A10, Sony ICD-SX2000, Roland R-07 (not for long), Zoom H4n Pro

Offline voodoostrat

  • Trade Count: (11)
  • Taperssection Regular
  • **
  • Posts: 87
Re: Windscreens for AT853
« Reply #17 on: October 12, 2022, 11:47:18 PM »
I grabbed these and gave them a test a couple weeks ago, really pleased with the results. Kinda odd that they come in 5 packs, but the price was reasonable.



https://www.adorama.com/mvws10m.html?gclid=Cj0KCQjwy5maBhDdARIsAMxrkw1FXT2U0LcRAjJiPyLtjjeyMYEmzNBt4qXtsX8I4vAXOBekRKNPJKEaAlbvEALw_wcB&gclsrc=aw.ds&utm_source=adl-gbase-p

Offline Popmarter

  • Trade Count: (2)
  • Taperssection Member
  • ***
  • Posts: 683
  • Gender: Male
Re: Windscreens for AT853
« Reply #18 on: October 13, 2022, 01:50:16 AM »
i got these mics last year and two of these windscreen came with it. works fine!
Recorders: SD MixPre 3 II; Sony A10; Edirol R44; Sony M10; Sony WM-D6; Edirol R-09HR; iRiver IHP-120; Sharp MD-MT20; Sharp MD-MT190
Microphones: Nevaton MC59/S (cards); Milab VM-44 Links (cards), AT853 7.4mod (cards); AT831 (cards); Nakamichi CM300 (all CP's); Soundman OKM II Rock Studios
Preamps: Beyerdynamic MV100; JK Laboratories DVC-X-17b; Naiant IPA; Nakamichi MX-100 modded for 9v battery use

 

RSS | Mobile
Page created in 0.072 seconds with 42 queries.
© 2002-2023 Taperssection.com
Powered by SMF