Become a Site Supporter and Never see Ads again!

Author Topic: Making cables for Schoeps Lemo?  (Read 363 times)

0 Members and 1 Guest are viewing this topic.

Offline SMsound

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 130
Making cables for Schoeps Lemo?
« on: September 22, 2022, 01:43:49 PM »
I'm finally making the jump to Schoeps CMC1L with Lemo connectors. I'd like to be able to make some custom Lemo-to-XLR cables for them.

What is the Schoeps 3-pin Lemo connector I need?  How challenging are they to solder, assuming I'm set up for doing small stuff?
waves -> bits

Offline DavidPuddy

  • Trade Count: (16)
  • Taperssection All-Star
  • ****
  • Posts: 1578
Re: Making cables for Schoeps Lemo?
« Reply #1 on: September 22, 2022, 02:47:27 PM »
I believe you need a special tool for crimping to the Lemo connectors. The part number for the connectors should be FVN.00.650.KLAC31Y.

I ended up buying a special cable from Schoeps for mine: AK 2L/SU Y Cable for CCM

« Last Edit: September 22, 2022, 02:52:55 PM by DavidPuddy »

Offline SMsound

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 130
Re: Making cables for Schoeps Lemo?
« Reply #2 on: September 22, 2022, 05:47:25 PM »
I believe you need a special tool for crimping to the Lemo connectors. The part number for the connectors should be FVN.00.650.KLAC31Y.

I ended up buying a special cable from Schoeps for mine: AK 2L/SU Y Cable for CCM


^^Ouch---$45 each for just the Lemo the connectors... 

This is great info by the way. Has anyone tried soldering them or have any more info about the crimper I need (I have lots of crimpers, but maybe not a special one).

Also, is there another company that makes sub-$45 connectors that fit?
waves -> bits

Offline voltronic

  • Trade Count: (35)
  • Needs to get out more...
  • *****
  • Posts: 3705
Re: Making cables for Schoeps Lemo?
« Reply #3 on: September 22, 2022, 09:25:38 PM »
I suggest you pay for those expensive connectors, and make your own cables. I don't think there's any competition who makes the same thing cheaper.

Otherwise, you'll need the cable David bought, but it's hideously overpriced like most Schoeps accessories. The total materials cost of that cable is no more than $100, even if you use the Schoeps KS cable stock.

The other option is to exchange your CMC 1 L for CMC 1 U. XLR connectors are cheap, so you could make a Y cable of similar length for about $25.
I am hitting my head against the walls, but the walls are giving way.
- Gustav Mahler

Team Line Audio
Team DPA

 

RSS | Mobile
Page created in 0.032 seconds with 27 queries.
© 2002-2023 Taperssection.com
Powered by SMF