Become a Site Supporter and Never see Ads again!

Author Topic: ISO Clamp Suggestions  (Read 423 times)

0 Members and 1 Guest are viewing this topic.

Offline mbogigian

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 25
ISO Clamp Suggestions
« on: January 15, 2023, 11:55:52 AM »
I’m looking for suggestions for clamps to use at shows. Whether it be clamping to a rail or another mic stand. I have akg blue lines w the t bar. Links are appreciated and if anyone happens to have any for sale please PM me. Thanks for the help!

Offline voltronic

  • Trade Count: (35)
  • Needs to get out more...
  • *****
  • Posts: 3705
Re: ISO Clamp Suggestions
« Reply #1 on: January 15, 2023, 12:44:20 PM »
I’m looking for suggestions for clamps to use at shows. Whether it be clamping to a rail or another mic stand. I have akg blue lines w the t bar. Links are appreciated and if anyone happens to have any for sale please PM me. Thanks for the help!

Look no further than the 9.Solutions clamps, especially the Savior Clamp With Socket. You will never use a Super Clamp again after trying one of these. My full review here:

https://taperssection.com/index.php?topic=193520
I am hitting my head against the walls, but the walls are giving way.
- Gustav Mahler

Team Line Audio
Team DPA

Offline aaronji

  • Site Supporter
  • Trade Count: (8)
  • Needs to get out more...
  • *
  • Posts: 3603
Re: ISO Clamp Suggestions
« Reply #2 on: January 15, 2023, 03:29:41 PM »
For stand clamping, I would recommend finding a smaller clamp. By the time you add a pound of clamp, plus bar/mounts/mics, to a stand it can get pretty top-heavy and sway quite a bit. Less weight also means you don't have to tighten it down so hard that you might damage the (typically) aluminum, narrow top section of the stand. 

Offline fireonshakedwnstreet

  • Trade Count: (8)
  • Taperssection Member
  • ***
  • Posts: 700
  • Gender: Male
  • David
Re: ISO Clamp Suggestions
« Reply #3 on: January 15, 2023, 03:41:55 PM »
Mics: AT 3031; AT 853Rx (c, o); CA-14(c); Naiant X-R (h); Studio Projects C4 (c, o, h); Nak 300/Tascam PE-125/JVC M510 (cp-1, cp-2, cp-3, JVC M510 superdirectional caps)
Recorders: Tascam DR-680 MkII; Tascam DR-70D; Tascam DR-5; Tascam DR-2D
Pres: Edirol UA-5 (Oade PMod & WMod); Marantz PMD661 (OCM); Marantz PMD620 (Oade WMod); Naiant MidBox

Offline mbogigian

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 25
Re: ISO Clamp Suggestions
« Reply #4 on: January 16, 2023, 12:19:59 PM »
Awesome thanks

Offline rocksuitcase

  • Trade Count: (3)
  • Needs to get out more...
  • *****
  • Posts: 7694
  • Gender: Male
    • RockSuitcase: stage photography
Re: ISO Clamp Suggestions
« Reply #5 on: January 16, 2023, 01:00:00 PM »
To the OP, both of these are excellent solutions. the Savior clamp (or Super Clamp whichever you choose) for rails, chair rails, tabletops etc. the Windtech C clamp is the go-to for smaller, clamp to your own or others' stand solution. e.g I own three Windtechs and one superclamp with stud.  Good luck!
music IS love

When you get confused, listen to the music play!

Mics:         AKG460|CK61|CK1|CK3|CK8|Beyer M 201E|DPA 4060 SK
Recorders:Marantz PMD661 OADE Concert mod; Tascam DR680 MKI

Offline voltronic

  • Trade Count: (35)
  • Needs to get out more...
  • *****
  • Posts: 3705
Re: ISO Clamp Suggestions
« Reply #6 on: January 16, 2023, 03:31:54 PM »
If you click the first link in my post, you'll see that 9.Solutions has a mini version of the Savior - only 135 g.
I am hitting my head against the walls, but the walls are giving way.
- Gustav Mahler

Team Line Audio
Team DPA

Offline mbogigian

  • Trade Count: (0)
  • Taperssection Newbie
  • *
  • Posts: 25
Re: ISO Clamp Suggestions
« Reply #7 on: January 17, 2023, 02:01:51 PM »
I’m looking for suggestions for clamps to use at shows. Whether it be clamping to a rail or another mic stand. I have akg blue lines w the t bar. Links are appreciated and if anyone happens to have any for sale please PM me. Thanks for the help!

Look no further than the 9.Solutions clamps, especially the Savior Clamp With Socket. You will never use a Super Clamp again after trying one of these. My full review here:

https://taperssection.com/index.php?topic=193520




What te the prices for this clamp? I don’t see any or links for where to buy. Thanks

Offline vanark

  • TDS
  • Trade Count: (29)
  • Needs to get out more...
  • *****
  • Posts: 8234
  • If you ain't right, you better get right!
    • The Mudboy Grotto - North Mississippi Allstar fan site
Re: ISO Clamp Suggestions
« Reply #8 on: January 17, 2023, 02:11:20 PM »

What te the prices for this clamp? I don’t see any or links for where to buy. Thanks

Looks to be $45 on B&H

https://www.bhphotovideo.com/c/product/1426914-REG/9_solutions_9_xs1005b_savior_clamp_with_socket.html

I didn't look anywhere else
If you have a problem relating to the Live Music Archive (http://www.archive.org/details/etree) please send an e-mail to us admins at LMA(AT)archive(DOT)org or post in the LMA thread here and we'll get on it.

Link to LMA Recordings

Link to Team Dirty South Recordings on the LMA

Mics: Microtech Gefell M21 (with Nbob actives) | Church Audio CA-11 (cards) (with CA UBB)
Pres: babynbox
Recorders: Tascam DR-60D | Tascam DR-40 | Sony PCM-A10 | Edirol R-4

Offline mrfender

  • Trade Count: (2)
  • Taperssection Member
  • ***
  • Posts: 342
Re: ISO Clamp Suggestions
« Reply #9 on: January 17, 2023, 03:41:30 PM »

What te the prices for this clamp? I don’t see any or links for where to buy. Thanks

Looks to be $45 on B&H

https://www.bhphotovideo.com/c/product/1426914-REG/9_solutions_9_xs1005b_savior_clamp_with_socket.html

I didn't look anywhere else

$39 on Amazon.
DR-01, DR-05, DR-22wl, DR-40, PCM-M10, Roland R-07
CA-11 omni, CA-14 card/omni, at853 cards/omni, Nak CM-300 cards/omni

Offline SMsound

  • Trade Count: (0)
  • Taperssection Regular
  • **
  • Posts: 130
Re: ISO Clamp Suggestions
« Reply #10 on: January 17, 2023, 04:02:39 PM »
If you click the first link in my post, you'll see that 9.Solutions has a mini version of the Savior - only 135 g.

^^ This is important. I have a ton of clamps, and it's often difficult to find a happy medium between the excellent, rock solid, heavy (450g or about 1lb) manfrotto super clamp, and lightweight little clamps.

Also, pay attention to how your t-bar attaches to the clamp. Many clamps only accept one 3/8" or 1/4" threaded stud, which is not always ideal (it can twist and come loose, so it won't fall off but your mics will be pointed the wrong way in that case)

I like the Manfrotto 386b nano clamp, it does have the twist issue unless you use the manfrotto quick connect or something with it. Voltronic's mini clamp looks good, too.
waves -> bits

Offline jbell

  • TDS
  • Trade Count: (146)
  • Needs to get out more...
  • *****
  • Posts: 4457
  • Gender: Male
  • Spreadicated
Re: ISO Clamp Suggestions
« Reply #11 on: January 18, 2023, 09:46:12 AM »
Rowi 76 is the most used clamp I have!  Doesn't work in all situation, but it is bomber for stand clamping or small rails.  You would have to find one used on Ebay, but if you keep and eye out it isn't hard to find one for a good price. 
Mics: DPA ST4011ER & 4018ER | AKG ck61 & ck63> Nbob actives
Preamps: DPA MMA 6000
Recorders: Sound Devices Mixpre-10 II | Sony PCM A10

-22        -12         -6        TDS   (32/48)     
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][}   
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]][} 
__________________________
|Record|  Runtime: 4:19.99  {|||] 75%

 

RSS | Mobile
Page created in 0.054 seconds with 34 queries.
© 2002-2023 Taperssection.com
Powered by SMF