Taperssection.com
Gear / Technical Help => TS Knowledge Base / Archive => Recording Gear => Topic started by: Brian Skalinder on September 23, 2003, 10:52:41 AM
-
how do you check for hours on a 300 or 500?
Subject: Re: how do you check for hours on a r300 or r500?
Date: Mon, 22 Sep 2003 10:38:10 - (EDT)
From: Doug Oade <doug@oade.com>
Press menu 'till menu appears on the display. Now use the AMS buttons
to toggle thru the selection 'till you see HOUR, this is drum hours
in units of 1 hour...Doug
-
Not sure what's up, I'm a R500 noob...
But on my R500, I hit Menu so that it was lit-up. Then I used the Toggle Dial until it read HOUR. A 4-digit display shows the hours, in my case 0606.
I'm guessing this is how I check Head Hours on my R500.
Terry
-
that's right - I didn't think you could check the head hours on a R300 ???
R500/R700 you definitely can and the way twatts mentioned is correct.
You can also turn on the undocumented error counter if you hack the remote on the R500 and R700
-
that's right - I didn't think you could check the head hours on a R300 ???
You absolutely can.
-
that's right - I didn't think you could check the head hours on a R300 ???
You absolutely can.
Please tell us. Thanks.