Taperssection.com
Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: hotdog on October 16, 2015, 01:44:14 PM
-
Hey folks what's everyone using for a external power supply for there p2 I've looked on the forum but can't find anything
Thank you
-
I always had great results with a 9V universal DVD battery.
-
Also, keep in mind that the hd-p2 will seamlessly transition from internal batteries to external. I used a pair of wooden dowels to make two fake internal batteries and used screws at the ends of each dowel to feed power to an external battery adaptor -- this allowed me to use two dvd batteries to run my hdp2 and avoid any concern of losing power. In retrospect, I believe that if I simply used nimh aa batteries in the internal battery slot, I'd have had all the power I'd ever need -- my hdp2 would run for 8-10 hours on a dvd battery while providing phantom power
-
I always had great results with a 9V universal DVD battery.
Thanks how did you find a connector to connect to the HD p2 ? And what was your run time and thank you