Taperssection.com
Gear / Technical Help => Post-Processing, Computer / Streaming / Internet Devices & Related Activity => Topic started by: Andrea82 on October 03, 2021, 06:09:56 AM
-
Hi,
After mastering I found that some tracks have a small gap at the end, very annoying. I used Ozone 9.
On 22 tracks, 6/7 have this problem.
The raw tracks from the master don't have this problem, so the cause is surely Ozone I used for the mastering.
My question are:
1) What can I do to avoid this problem in the future
2) What can I do to solve the problem on the tracks already worked
Many thanks in advance to all.