Topic: Way to find out if SLA is charged??

[Chuck]

I built this thing a while back. It is a 12 v -9 v regulated converter and battery tester. In the picture on the left hand side is the panel mount input connector.

[chase]

+T calico, that is pretty nifty.
+T alex for the 391 > dmic combo.  i used to run this and it is an awesome rig for the $.  are you gonna put that lotus up on the archive.org?  i know you had a little incident, that's why i ask.  i would love to get a copy.

[Swampy]

+T alex for the 391 > dmic combo.  i used to run this and it is an awesome rig for the $.  are you gonna put that lotus up on the archive.org?  i know you had a little incident, that's why i ask.  i would love to get a copy.

I think Im gonna bit torrent it in a little bit, Ill post it in the kickdown.

[Chuck]

Pin 1 ground 12v
Pin 4 + 12v
Pin 2 ground 6v
Pin 3 + 6v

Unfortunately after researching this, I've found that Oade and Eco-Charge use diffrent pin-outs for DC connectors.

Oade 6v =
Pin 1 Ground
Pin 2 Hot

What Swanny posted is the pin-outs for the Eco-Charge system.
The Eco-Charge system pinouts seem to  be the standard most used.