« Reply #15 on: March 23, 2022, 05:06:57 PM »
Appreciate the comments/replies.
1) Following up on the last comment/post : I understand I do not need a battery box as the DR-40X will feed phantom power to the mics (SP-CMC-4U-PHANTOM seems to be a good fit for my needs). However I read/interpreted the last post as the 4.7Khz mod is *ALSO* not needed when phantom power feeds these mics. Is that correct? I ask because the low-sensitivity option is not available for the SP-CMC-4U-PHANTOM
2) How do people clamp or position these mics when they are on a table or ledge in the venue? Are there certain gadgets/contraption people use? Anyway to point me in the right direction?
Again, thank you for the comments and the knowledge on this forum... it's been a rabbit hole but a fun one.
The xlr balanced version (Phantom) is the best option for high SPL. You don’t need the low sensitivity mod.
Logged
Tascam DR-40X, Tascam DR-2D, Roland R-07.
CA-14 Cards (4.7), SP-CMC-4U-Phantom, SP-CMC-4U (4.7) (AT 853 O, C), Sennheiser ME-104, Sennheiser ME-102, Line Audio OM1, Line Audio CM4.
Topic: Mic suggestion for DR-40x (Read 2723 times)