Taperssection.com
Gear / Technical Help => Ask The Tapers => Topic started by: jadedphan on March 21, 2018, 01:42:04 PM
-
Hey now,
So, I’ve been looking for a new nos bar for my schoeps actives, as I seemed to have lost mine somehow. I’ve looked at several of the moiunts in the shapeways 3D printing page, but the nos bar looks so thin, it doesn’t look like it will fit in the standard as20 mount, like my kwon bars do.
Can someone explain what other parts I would need to attach this bar to my stand/shockmount?
Thanks,
-bry
-
Rycote InVision INV-HG mkIII Microphone Suspension - Lyre Shockmount
https://www.bhphotovideo.com/c/product/880280-REG/Rycote_041118_INV_8_Microphone_Suspension.html?ap=y&c3api=1876%2C193854636894%2C%2C&gclid=CjwKCAjwhcjVBRBHEiwAoDe5x14gtxedl9vAZVOeFbbK3dVn5E473TW3VGjunaaahqc4wHXT_UyFuBoC2-IQAvD_BwE
http://taperssection.com/index.php?topic=185536.0
-
Hey now,
So, I’ve been looking for a new nos bar for my schoeps actives, as I seemed to have lost mine somehow. I’ve looked at several of the moiunts in the shapeways 3D printing page, but the nos bar looks so thin, it doesn’t look like it will fit in the standard as20 mount, like my kwon bars do.
Can someone explain what other parts I would need to attach this bar to my stand/shockmount?
Thanks,
-bry
it will fit in any standard 20mm clip including the as20.
-
THE DPA bar down NOT fit. It’s actually too big. However this is a side mount bar. Very different from the schoeps bar