Taperssection.com
Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: Sanjay on February 27, 2006, 01:22:30 AM
-
So I need a cheap mixer for two source on the fly matrixes. I know this has 4 but it seems a cheap compact solution to this. Anyone tried it, or have any input?
http://www.rolls.com/data/mx51man.pdf
(http://www.directproaudio.com/images/products/rollsmx51.jpg)
The MX51 is a small 4 channel mixer with individual volume controls, headphone and line outs. It has 2 1/4" inputs and 3 sets of stereo RCA inputs that are mixed to MONO. It has enough gain and output level for a power amp, has 2 RCA and one 1/4" output, and is powered by an included A/C adapter.
Specification:
Input Impedance: 10K Ohms unbal. each jack
CH 1 Gain: 32 dB 1/4" jack (max gain)
CH 2 Gain: 26dB 1/4" RCA
CH 3 and 4 Gain: 26dB each RCA
Output: 1/4" stereo and RCA
S/N Ratio: 90 dB
THD: .008%
IMD(SMPTE): .008%
Power: 12VDC adapter
Weight: 1 lb. (.45Kg)
Size: 3" x 5" x 1.25"
(8 x 13x x 3.2)
-
That sums 3 line level to Mono...
Look at the Samson Mixpad 4 if you need a DC powered device...
http://www.samsontech.com/products/productpage.cfm?prodID=66&brandID=2
If AC is ok - then there are lot of small mixers out there - I love my Yamaha 10 channel mixer!
-
So I need a cheap mixer for two source on the fly matrixes. I know this has 4 but it seems a cheap compact solution to this. Anyone tried it, or have any input?
http://www.rolls.com/data/mx51man.pdf
(http://www.directproaudio.com/images/products/rollsmx51.jpg)
The MX51 is a small 4 channel mixer with individual volume controls, headphone and line outs. It has 2 1/4" inputs and 3 sets of stereo RCA inputs that are mixed to MONO. It has enough gain and output level for a power amp, has 2 RCA and one 1/4" output, and is powered by an included A/C adapter.
Specification:
Input Impedance: 10K Ohms unbal. each jack
CH 1 Gain: 32 dB 1/4" jack (max gain)
CH 2 Gain: 26dB 1/4" RCA
CH 3 and 4 Gain: 26dB each RCA
Output: 1/4" stereo and RCA
S/N Ratio: 90 dB
THD: .008%
IMD(SMPTE): .008%
Power: 12VDC adapter
Weight: 1 lb. (.45Kg)
Size: 3" x 5" x 1.25"
(8 x 13x x 3.2)
Never used the MX51, almost bought it at one time, but didn't since it lacks pan controls on the channels. I've used the Rolls MX28 for 6 years now for matrix projects etc. It's compact and 100% portable.
http://www.directproaudio.com/product.cfm?directid=45856 (http://www.directproaudio.com/product.cfm?directid=45856)
I posted SHN's on archive.org of one of my on-the-fly MX28 matrix recordings...feel free to check it out:
http://www.archive.org/audio/etree-details-db.php?id=26890 (http://www.archive.org/audio/etree-details-db.php?id=26890)
-Kevin