Taperssection.com

Gear / Technical Help => Playback Forum => Topic started by: junkbondking on April 19, 2004, 11:25:50 PM

Title: anyone using vintage mcintosh pres/powers/receivers ?
Post by: junkbondking on April 19, 2004, 11:25:50 PM
my old system was a vintage aiwa tube 250 wpc beast, witha pair of vintage boston acoustic speakers.  had to sell it when we left cali.  im now in the process of putting together a new old school system.

id like to keep the pre/power combo around 500-700, and then drop a little more on speakers.  any advice is appreciated with +T's.

and fwiw, i have somewhat of a connection here in denver for vintage gear, but i don't know jack shit about electronics, and trust the folks here 100x's more than my hook up guy's friend.
Title: Re:anyone using vintage mcintosh pres/powers/receivers ?
Post by: jpschust on April 20, 2004, 12:34:55 AM
chris, how many ohms for that power rating? ive got an amp to suggest but if its at 8ohms it aint gonna cut it
Title: Re:anyone using vintage mcintosh pres/powers/receivers ?
Post by: junkbondking on April 20, 2004, 08:52:45 AM
the old macs could be run at 4, 6 or 8 ohms.  i'd rather get the amp firstand build the speakers around it.
Title: Re:anyone using vintage mcintosh pres/powers/receivers ?
Post by: jpschust on April 20, 2004, 08:56:06 AM
the amp im using is significantly less powerful than 250wpc, but it is just an amazing class a amp that works so well with classic gear.  I'm using the Belles 150a.  125wpc at 8ohms, 250 at 4ohms.  I'm convinced its the best amp for under a grand.  Get one of those and then get one of the amc tube pre's and replace the tubes- that will keep you in the general area of 700 bucks and create a nice mix of solid state and tube.
Title: Re:anyone using vintage mcintosh pres/powers/receivers ?
Post by: KC5 on April 20, 2004, 09:49:02 AM
i have a sansui g7500 receiver.  huge heavy sucker.  rated at 150 wpc.  speakers are klipsch heresy's--older ones--not the II version.  from the meters on the receiver it seems at 1watt the speakers are loud and sounding great.  reciever ran me $300, and speakers were $700 shipped.  i also have a marantz cassette deck and marantz turntable--model numbers elude me.  

eventually, i plan to buy vintage mac stuff.  i've always liked the sound of tubes with the klipsch speakers--cornwalls if you can find them.

 
Title: Re:anyone using vintage mcintosh pres/powers/receivers ?
Post by: mmmatt on April 20, 2004, 05:30:16 PM
Have you checked out the old crown stuff?  A friend of mine has an old crown amp and semi-old adcom pre that sounds sweet.  His speakers are home built and not sure of the drivers.  His system is VERY acurate.  My system is a nakamichi receiver and a pair of polks.  It's so forgiving even my recordings sound good!!!  I take all my stuff over to my buddies before I release it.

Matt
Title: Re:anyone using vintage mcintosh pres/powers/receivers ?
Post by: THE NIZ BIAAAAACH! on April 24, 2004, 04:08:10 PM
I live up in breck. I run a vintage mac 7200 250w a side and B&W 604's, if ya wanna come up and listen let me know, bring your favorite stuff.  We gotta get Tim up here too.