Hi all,
Have Wavelab 5.0 and 6.0. When I get home from a show have many files and sometimes with many mics sources (up to 8 channels) for up to a 3 hour show.
What I want to do is create a matrix in wavelab. I open the first group of files (first file ran from 00:00 to say 45:00 minutes with 8 channels)in an audio montage window in wavelab then run many effects (Example: compressor, limiters, EQ etc.) and I want to save ALL those setting for the next audio montage. Sometimes I need to run 4-6 audio montages and want all the same settings. I see you can save the "effects" and "bank" setting thou they never bring up all the effects I was running. Just one effect for the file (SBD source) not all the effects I was running for that file (SBD source).
Sometimes I have 3-4 sources (SBD+cards+omnis+wide cards) in the montage and I want different setting for the omnis then the sbd, then the cards, then the wide cards, thou each time I run the montage I want the that exact same setting for each type of mic/sbd feed. Been doing this manually and it takes some time for each run. Even thou I have tried saving them as the effects and bands setting.
Also, I know you can save a "preset"window from the "effects" in wavelab thou that is for the whole group of files not each set of files.
Overall I want to create a audio montage then run effects on each source and save those effects for the next audio montage I need to run.
Any help or advice would be appreciated.
Thanks
patrick