I just picked up a used Sonosax and wondering if anyone can give me a good starting point for where to begin with the levels on both units. Im used to running VMS 5u> AD-1000, with VMS set to 20, and the AD-1000 set at +4 and around 3:00 on the cal pots. Can I still run the Apogee at +4 with the Sonosax set to Lo gain? If so where should I begin with the cal pots? and where do I set the trim knobs on the Sonosax?
Im now running cmc64's into the Sonosax if that helps.
thanks.