Taperssection.com
Gear / Technical Help => Cables => Topic started by: mblindsey on February 25, 2010, 09:41:24 PM
-
Many, many thanks to everyone who gave advice. I have built a couple of attenuator barrels and tried them once with great results. Here is how I did it (with much community help):
https://docs.google.com/present/edit?id=0AdfSwo6XauOqZGRoanZtc25fNThnMzJkc2JkNQ&hl=en
Have a suggestion? Let me know and I will update the doc.
--Michael
-
Nice write up buddy! Love the DIY threads myself!
Neil
-
Nice job! I just made a xlr > mini for just this purpose.
-
Nice job! I just made a xlr > mini for just this purpose.
Thanks for the "How To"!
-25dB Lunatc V3 Attenuator Cable: 2' Chopped Right Angle TRS Mini > Offset Chopped XLRF
(http://i319.photobucket.com/albums/mm442/tgakidis/cables_and_interconnects/IMG_8658.jpg)
-
Now.... What would be interesting is a comp (with lots of low frequency) that compares the cable to the alternative.
Maybe?
source > v3 @ 40db > attenuator > r09
vs.
source > v3 @ 15db > r09
(the choice of 40 and 15 db was arbitrary)
-
Thanks for the "How To"!
-25dB Lunatc V3 Attenuator Cable: 2' Chopped Right Angle TRS Mini > Offset Chopped XLRF
When do those go on sale?
--Michael
-
Great stuff! Maybe drawing the schematic out and including it with the step-by-step sequence would help those that want to try this. I've made many similar cables over the years.