Taperssection.com
Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: gmm6797 on May 29, 2006, 10:25:35 PM
-
Has anyone every tried to split the BNC signal at the back of the VMS with a BNC "T" splitter (or some other splitter)?
If so, what were the results?
I want to do a field test of
Pre-Amp > A>D > Deck
vs
Pre-Amp > Deck
but I want both to be the same source... if you follow.
Any thoughts or ideas are appreciated.
TIA
-
I've not done it on the Schoeps, but I did it on the AD2K and there were no issues at all.
-
split away. I know that schoepsnbox did it with the nbox which the VMS02ib was modeled after and it worked fine. I have done it with all my other pres for comps and never had an issue.
I say go for it....Interesting comp BTW
-
split away. I know that schoepsnbox did it with the nbox which the VMS02ib was modeled after and it worked fine. I have done it with all my other pres for comps and never had an issue.
I say go for it....Interesting comp BTW
Thanks, I am going to do some testing this week with the UA5 that busman2 sent me on Monday :)