Taperssection.com
Gear / Technical Help => Microphones & Setup => Topic started by: JD on April 06, 2007, 11:11:17 PM
-
I am curios what the outer diameter of the mic is on the diaphragm end, for the TC, QTC or M series Earthworks mics.
Looking at the possibility of using a set of Earthworks OMW2 windscreens on the Avenson STO-2 mics I just got from Jon.
Thanks
-
The QTC series is approximately .25-in. in diameter. The SR series is approximately .50-in in diameter.
Wayne
-
Thanks for the info Wayne. +T
The Avenson's are .290" so the OMW2 windscreens should work. :)