Topic: Audix Micro users, shockmounts? (or lowpro Shure/Schoeps A20/s mount question)

[nic]

so I just received the extension arm for the super-clamp(sans super clamp) and the shaft is 16mm.
trying to find a shockmount that will hold this, so I can use only 1 shockmount for my whole assembly instead of 1 shockmount per each mic.

I looked at the Schoeps A20/s and it doesnt appear it will work as it is designed for 20mm mics.
cant find any specs on the Shure lowpro mount

[Todd R]

I use the schoeps A20 shockmount to hold both of my audix micros.  Well, to hold both of the mic mounts that came with the audix micros.  Works great, and maintains a pretty low profile.

[timP]

so what do ya'll think of those things (the audix)?

I have been thinking of getting the 1290hc for atleast 3 months now, emailing vendors about switchable caps, prices etc
think about how nice it would be to have them every time I have to worry about my top-heavy ADK TLs in a packed club...

[John Kelly]

I use the schoeps A20 shockmount to hold both of my audix micros.  Well, to hold both of the mic mounts that came with the audix micros.  Works great, and maintains a pretty low profile.

So the mounts DO fit in the a20 shockmounts?  I was worried about that...

Guess it's time to order the mount.

[nic]

I use the schoeps A20 shockmount to hold both of my audix micros.  Well, to hold both of the mic mounts that came with the audix micros.  Works great, and maintains a pretty low profile.

So the mounts DO fit in the a20 shockmounts?  I was worried about that...
Guess it's time to order the mount.

yeah, I'm wondering if the MBHO 440 clips will fit in the A20...outside edge diameter is 6/8"

[John Kelly]

I use the schoeps A20 shockmount to hold both of my audix micros.  Well, to hold both of the mic mounts that came with the audix micros.  Works great, and maintains a pretty low profile.

So the mounts DO fit in the a20 shockmounts?  I was worried about that...
Guess it's time to order the mount.

yeah, I'm wondering if the MBHO 440 clips will fit in the A20...outside edge diameter is 6/8"

I've seen people run the MBHO clips in the A20.

[plucks]

I use the schoeps A20 shockmount to hold both of my audix micros.  Well, to hold both of the mic mounts that came with the audix micros.  Works great, and maintains a pretty low profile.

works like a charm!

[nic]

I've seen people run the MBHO clips in the A20.

sweet, guess I need to figure out someway to connect the 440 clips togethor

[John Kelly]

I've seen people run the MBHO clips in the A20.

sweet, guess I need to figure out someway to connect the 440 clips togethor

Duct tape?  How are you holding the Audix mount together?

[Kindguy]

I've seen people run the MBHO clips in the A20.

sweet, guess I need to figure out someway to connect the 440 clips togethor

Check this out. 2 shure shocks held together by a threaded stud & slipped in a AKG mic clip. You can get the threaded stud at www.tensimount.com (littl stubby I think it's 5 bucks)

[Fryhoffer]

Has anyone tried the shockmount that Audix makes for the Micros?  Looks pretty small and seems like a pair would work well on an A27M.

[John Kelly]

I have them and have used them on the vert bar.  They are small...