Become a Site Supporter and Never see Ads again!
« previous next »
Pages: [1]   Go Down

Author Topic: Earthworks TC, QTC, or M series mic owners step inside.  (Read 1915 times)

0 Members and 1 Guest are viewing this topic.

Offline JD

  • Trade Count: (9)
  • Taperssection All-Star
  • ****
  • Posts: 1643
Earthworks TC, QTC, or M series mic owners step inside.
« on: April 06, 2007, 11:11:17 PM »
I am curios what the outer diameter of the mic is on the diaphragm end, for the  TC, QTC or M series Earthworks mics.

Looking at the possibility of using a set of Earthworks OMW2 windscreens on the Avenson STO-2 mics I just got from Jon.

Thanks
Logged
Mics: DPA 4022, 4060; Nevaton MC51, MCE400; Gefell sms2000, m20, m21, m27
Pres: DPA MMA6000; Grace V2; Portico 5012; Sonosax SX-M2
Recorders: Edirol R09hr, Sound Devices 722

Offline wbrisette

  • Trade Count: (2)
  • Needs to get out more...
  • *****
  • Posts: 2855
  • Gender: Male
    • Homepage
Re: Earthworks TC, QTC, or M series mic owners step inside.
« Reply #1 on: April 06, 2007, 11:46:57 PM »
The QTC series is approximately .25-in. in diameter. The SR series is approximately .50-in in diameter.

Wayne
Logged
Mics: Earthworks SR-77 (MP), QTC-1 (MP)

Editing: QSC RMX2450, MOTU 2408 MK3, Earthworks Sigma 6.2

Offline JD

  • Trade Count: (9)
  • Taperssection All-Star
  • ****
  • Posts: 1643
Re: Earthworks TC, QTC, or M series mic owners step inside.
« Reply #2 on: April 06, 2007, 11:53:58 PM »
Thanks for the info Wayne.  +T

The Avenson's are .290" so the OMW2 windscreens should work. :)
« Last Edit: April 06, 2007, 11:55:49 PM by Jaledu »
Logged
Mics: DPA 4022, 4060; Nevaton MC51, MCE400; Gefell sms2000, m20, m21, m27
Pres: DPA MMA6000; Grace V2; Portico 5012; Sonosax SX-M2
Recorders: Edirol R09hr, Sound Devices 722
Pages: [1]   Go Up
« previous next »
 

RSS | Mobile
Page created in 0.04 seconds with 28 queries.
© 2002-2024 Taperssection.com
Powered by SMF